Package: installation-reports
Debian-installer-version: http://www.debian.org/devel/debian-installer/
uname -a: Linux nsmse68 2.6.8-1-386 #1 Tue Nov 8 22:45:28 CET 2004 i686 GNU/Linux
Date: originally 8. Nov
Method: CD Boot (USB) (http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-netinst.iso)
and using ftp.de.debian.org as depot ...
Machine: HP compaq nc4010 Processor: Pentium M Memory: 512 (later it will be 1024) Root Device: ide /dev/hda3 Root Size/partition table: Disk /dev/hda: 60.0 GB, 60011642880 bytes 16 heads, 63 sectors/track, 116280 cylinders Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System /dev/hda1 1 15501 7812472+ c W95 FAT32 (LBA) /dev/hda2 15502 25189 4882752 c W95 FAT32 (LBA) /dev/hda3 25190 112382 43945272 83 Linux /dev/hda4 112383 116280 1964592 82 Linux swap
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device cbb2 (rev 02)
0000:00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
0000:00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
0000:00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
0000:00:09.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
0000:00:0b.0 CardBus bridge: O2 Micro, Inc. OZ711M1 SmartCardBus MultiMediaBay Controller (rev 20)
0000:00:0b.2 System peripheral: O2 Micro, Inc. OZ711Mx MultiMediaBay Accelerator
0000:00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
0000:00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
0000:00:12.0 USB Controller: NEC Corporation USB (rev 43)
0000:00:12.1 USB Controller: NEC Corporation USB (rev 43)
0000:00:12.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0000:00:13.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 03)
0000:01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M
----------------------
0000:00:00.0 0600: 1002:cbb2 (rev 02)
0000:00:01.0 0604: 1002:7010
0000:00:06.0 0401: 10b9:5451 (rev 02)
0000:00:07.0 0601: 10b9:1533
0000:00:08.0 0703: 10b9:5457
0000:00:09.0 0200: 168c:0013 (rev 01)
0000:00:0b.0 0607: 1217:7114 (rev 20)
0000:00:0b.2 0880: 1217:7110
0000:00:10.0 0101: 10b9:5229 (rev c4)
0000:00:11.0 0680: 10b9:7101
0000:00:12.0 0c03: 1033:0035 (rev 43)
0000:00:12.1 0c03: 1033:0035 (rev 43)
0000:00:12.2 0c03: 1033:00e0 (rev 04)
0000:00:13.0 0200: 14e4:165d (rev 03)
0000:01:05.0 0300: 1002:4337
Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O]
Comments/Problems:
keep going!!! everyting worked perfect, at least for me.
The only thing was the X configuration: - X was working (with wrong resolution / scaled on notebook lcd) - no problem using xf86cfg to reconfigure - I created the link /dev/mouse -> /dev/input/mice manually
Using grub as default is a great choice! thanks!
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]