Package: installation-reports Boot method: debian-testing-amd64-netinst(3).iso Image version: http://www.debian.org/devel/debian-installer/ downloaded 31/7/06 Date: 31 July 06 20:30
Machine: Acer Aspire 1524WLMi Processor: AMD Athlon(tm) 64 Processor 3400+ Memory: 512Mb Partitions: Disk /dev/hda: 60.0 GB, 60011642880 bytes 255 heads, 63 sectors/track, 7296 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 255 2048256 12 Compaq diagnostics /dev/hda2 256 1537 10297665 c W95 FAT32 (LBA) /dev/hda3 1538 7296 46259167+ f W95 Ext'd (LBA) /dev/hda5 1538 2072 4297356 c W95 FAT32 (LBA) /dev/hda6 2073 2078 48163+ 83 Linux /dev/hda7 2310 2917 4883728+ 83 Linux /dev/hda8 3648 3653 48163+ 83 Linux /dev/hda9 3654 3677 192748+ 83 Linux /dev/hda10 3678 4285 4883728+ 83 Linux /dev/hda11 4286 4407 979933+ 82 Linux swap / Solaris /dev/hda12 4408 4468 489951 83 Linux /dev/hda13 4469 5112 5172898+ 83 Linux /dev/hda14 5113 5720 4883728+ 83 Linux /dev/hda15 5721 6328 4883728+ 83 Linux /dev/hda16 6329 7296 7775428+ 83 Linux /dev/hda17 2079 2139 489951 83 Linux /dev/hda18 2140 2309 1365493+ 82 Linux swap / Solaris /dev/hda19 2918 3221 2441848+ 83 Linux /dev/hda20 3222 3282 489951 83 Linux /dev/hda21 * 3283 3647 2931862 83 Linux Installed on hda21 Output of lspci and lspci -n: [EMAIL PROTECTED]:~$ lspci bash: lspci: command not found [EMAIL PROTECTED]:~$ sudo lspci sudo: lspci: command not found [EMAIL PROTECTED]:~$ dpkg -S lspci dpkg: *lspci* not found. Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Another quick install - 10mins from booting the installer to rebooting into the base system. And for the first time ever on this machine, X worked 'out of the box' after installing x-window-system-core and fluxbox - no tweeking xorg.conf :) I'm a bit confused by not being able to run lspci The grub install was fine except there seemed to be repeat entries and some with misleading titles. I've got 5 linux systems plus XP on this box. Attached are the auto-generated menu.lst and a cleaned up version removing extraneous entries. The uncleaned version booted all 5 systems but I didn't try every entry (ie. the ones that seemed confused). This is unlikely to be a problem many people will come across :) I thought the sarge installer was pretty easy after woody but this is a breeze - again ... brilliant work :) Thanks Clive -- www.clivemenzies.co.uk ... ...strategies for business
# menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not change this entry to 'saved' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 5 # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=/dev/hda21 ro ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,20) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions= ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(single-user) single # altoptions=(single-user mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## ## End Default Options ## title Debian GNU/Linux, kernel 2.6.16-2-amd64-generic root (hd0,20) kernel /boot/vmlinuz-2.6.16-2-amd64-generic root=/dev/hda21 ro initrd /boot/initrd.img-2.6.16-2-amd64-generic savedefault boot title Debian GNU/Linux, kernel 2.6.16-2-amd64-generic (single-user mode) root (hd0,20) kernel /boot/vmlinuz-2.6.16-2-amd64-generic root=/dev/hda21 ro single initrd /boot/initrd.img-2.6.16-2-amd64-generic savedefault boot ### END DEBIAN AUTOMAGIC KERNELS LIST # This is a divider, added to separate the menu items below from the Debian # ones. title Other operating systems: root # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda15. title Debian GNU/Linux (testing/unstable) (on /dev/hda15) root (hd0,14) kernel /boot/vmlinuz-2.6.16-grml root=/dev/hda15 savedefault boot # This entry automatically added by the Debian installer for a non-linux OS # on /dev/hda2 title Microsoft Windows XP Home Edition root (hd0,1) savedefault makeactive chainloader +1 # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda16. title Ubuntu, kernel 2.6.15-15-amd64-k8 Default (on /dev/hda16) root (hd0,15) kernel /boot/vmlinuz root=/dev/hda16 ro quiet splash initrd /boot/initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda16. title Ubuntu, kernel 2.6.15-15-amd64-k8 Default (recovery mode) (on /dev/hda16) root (hd0,15) kernel /boot/vmlinuz root=/dev/hda16 ro single initrd /boot/initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda16. title Ubuntu, kernel 2.6.15-15-amd64-k8 (on /dev/hda16) root (hd0,15) kernel /boot/vmlinuz-2.6.15-15-amd64-k8 root=/dev/hda16 ro quiet splash initrd /boot/initrd.img-2.6.15-15-amd64-k8 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda16. title Ubuntu, kernel 2.6.15-15-amd64-k8 (recovery mode) (on /dev/hda16) root (hd0,15) kernel /boot/vmlinuz-2.6.15-15-amd64-k8 root=/dev/hda16 ro single initrd /boot/initrd.img-2.6.15-15-amd64-k8 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda16. title Ubuntu, memtest86+ (on /dev/hda16) root (hd0,15) kernel /boot/memtest86+.bin savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda9. title Debian GNU/Linux, kernel 2.6.17-1-amd64-k8 Default (on /dev/hda9) root (hd0,7) kernel /vmlinuz root=/dev/hda9 ro initrd /initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda9. title Debian GNU/Linux, kernel 2.6.17-1-amd64-k8 Default (recovery mode) (on /dev/hda9) root (hd0,7) kernel /vmlinuz root=/dev/hda9 ro single initrd /initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda9. title Debian GNU/Linux, kernel 2.6.17-1-amd64-k8 (on /dev/hda9) root (hd0,7) kernel /vmlinuz-2.6.17-1-amd64-k8 root=/dev/hda9 ro initrd /initrd.img-2.6.17-1-amd64-k8 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda9. title Debian GNU/Linux, kernel 2.6.17-1-amd64-k8 (recovery mode) (on /dev/hda9) root (hd0,7) kernel /vmlinuz-2.6.17-1-amd64-k8 root=/dev/hda9 ro single initrd /initrd.img-2.6.17-1-amd64-k8 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda9. title Debian Xfce, kernel 2.6.11-9-amd64-k8 (on /dev/hda17) (on /dev/hda9) root (hd0,7) kernel /vmlinuz root=/dev/hda17 ro initrd /initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian (Enlightenment), kernel 2.6.16-1-amd64-k8 Default (on /dev/hda17) root (hd0,5) kernel /vmlinuz root=/dev/hda9 ro initrd /initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian (Enlightenment), kernel 2.6.16-1-amd64-k8 Default (recovery mode) (on /dev/hda17) root (hd0,5) kernel /vmlinuz root=/dev/hda9 ro single initrd /initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian Etch kernel vmlinuz-2.6.15-amd64-k8 (on /dev/hda17) root (hd0,5) kernel /vmlinuz root=/dev/hda21 ro initrd /initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian GNU/Linux, kernel 2.6.16-1-amd64-k8 Default (on /dev/hda17) root (hd0,5) kernel /vmlinuz root=/dev/hda17 ro initrd /initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian GNU/Linux, kernel 2.6.16-1-amd64-k8 Default (recovery mode) (on /dev/hda17) root (hd0,5) kernel /vmlinuz root=/dev/hda17 ro single initrd /initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian GNU/Linux, kernel 2.6.15-1-amd64-k8 Previous (on /dev/hda17) root (hd0,5) kernel /vmlinuz.old root=/dev/hda17 ro initrd /initrd.img.old savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian GNU/Linux, kernel 2.6.15-1-amd64-k8 Previous (recovery mode) (on /dev/hda17) root (hd0,5) kernel /vmlinuz.old root=/dev/hda17 ro single initrd /initrd.img.old savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian GNU/Linux, kernel 2.6.16-1-amd64-k8 (on /dev/hda17) root (hd0,5) kernel /vmlinuz-2.6.16-1-amd64-k8 root=/dev/hda17 ro initrd /initrd.img-2.6.16-1-amd64-k8 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian GNU/Linux, kernel 2.6.16-1-amd64-k8 (recovery mode) (on /dev/hda17) root (hd0,5) kernel /vmlinuz-2.6.16-1-amd64-k8 root=/dev/hda17 ro single initrd /initrd.img-2.6.16-1-amd64-k8 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian GNU/Linux, kernel 2.6.15-1-amd64-k8 (on /dev/hda17) root (hd0,5) kernel /vmlinuz-2.6.15-1-amd64-k8 root=/dev/hda17 ro initrd /initrd.img-2.6.15-1-amd64-k8 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian GNU/Linux, kernel 2.6.15-1-amd64-k8 (recovery mode) (on /dev/hda17) root (hd0,5) kernel /vmlinuz-2.6.15-1-amd64-k8 root=/dev/hda17 ro single initrd /initrd.img-2.6.15-1-amd64-k8 savedefault boot
# menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not change this entry to 'saved' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 5 # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=/dev/hda21 ro ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,20) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions= ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(single-user) single # altoptions=(single-user mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## ## End Default Options ## title Debian Etch, kernel 2.6.16-2-amd64-generic root (hd0,20) kernel /boot/vmlinuz-2.6.16-2-amd64-generic root=/dev/hda21 ro initrd /boot/initrd.img-2.6.16-2-amd64-generic savedefault boot title Debian Etch, kernel 2.6.16-2-amd64-generic (single-user mode) root (hd0,20) kernel /boot/vmlinuz-2.6.16-2-amd64-generic root=/dev/hda21 ro single initrd /boot/initrd.img-2.6.16-2-amd64-generic savedefault boot ### END DEBIAN AUTOMAGIC KERNELS LIST # This is a divider, added to separate the menu items below from the Debian # ones. title Other operating systems: root # This entry automatically added by the Debian installer for a non-linux OS # on /dev/hda2 title Microsoft Windows XP Home Edition root (hd0,1) savedefault makeactive chainloader +1 # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda15. title grml (on /dev/hda15) root (hd0,14) kernel /boot/vmlinuz-2.6.16-grml root=/dev/hda15 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda16. title Ubuntu, kernel 2.6.15-15-amd64-k8 Default (on /dev/hda16) root (hd0,15) kernel /boot/vmlinuz root=/dev/hda16 ro quiet splash initrd /boot/initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda16. title Ubuntu, kernel 2.6.15-15-amd64-k8 Default (recovery mode) (on /dev/hda16) root (hd0,15) kernel /boot/vmlinuz root=/dev/hda16 ro single initrd /boot/initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda16. title Ubuntu, memtest86+ (on /dev/hda16) root (hd0,15) kernel /boot/memtest86+.bin savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda9. title Debian Enlightenment, kernel 2.6.17-1-amd64-k8 Default (on /dev/hda9) root (hd0,7) kernel /vmlinuz root=/dev/hda9 ro initrd /initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda9. title Debian Enlightenment, kernel 2.6.17-1-amd64-k8 Default (recovery mode) (on /dev/hda9) root (hd0,7) kernel /vmlinuz root=/dev/hda9 ro single initrd /initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian Xfce, (on /dev/hda17) root (hd0,5) kernel /vmlinuz root=/dev/hda17 ro initrd /initrd.img savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hda17. title Debian Xfce, kernel 2.6.16-1-amd64-k8 Default (recovery mode) (on /dev/hda17) root (hd0,5) kernel /vmlinuz root=/dev/hda17 ro single initrd /initrd.img savedefault boot