On Sunday 17 December 2006 06:03, Dan Oglesby wrote: > The installation went perfect, all hardware detected (network, SCSI > controller, and hard drive), drive partitioned just fine. After > rebooting, it looks like the SCSI controller module is missing from the > initial ramdisk again. System boots from the hard drive, then can't > find the root filesystem (can't open root device).
Is this the esp module again or a different one? This is strange because the installer should add the esp module in /etc/initramfs-tools/modules, which in turn should ensure that the initrd contains and loads it. Could you check if esp is listed in /etc/initramfs-tools/modules? Could you check if the initrd actually contains the module or not (should be under /lib/modules/...; you can check when dropped into the debug shell)? > Does this need to go into a seperate bug report since it is a different > system (but same architecture as the SS20 I've been using)? No, as there are no different issues I don't think a separate report adds anything. Thanks very much for your tests! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
