Package: installation-reports INSTALL REPORT
Debian-installer-version: <Fill in date and from where you got the image> Lenny Beta2 for PowerPC KDE CD-1 uname -a: <The result of running uname -a on a shell prompt> Date: <Date and time of the install> June 24 19:35 EDT (US Eastern "daylight" time) Method: How did you install? What did you boot off? If network install, from where? Proxied? Boot from CD. Did a "standard" install Machine: <Description of machine (eg, IBM Thinkpad R32)> Processor:$ cat /proc/cpuinfo processor : 0 cpu : 7400, altivec supported temperature : 35-37 C (uncalibrated) clock : 350.000000MHz revision : 2.8 (pvr 000c 0208) bogomips : 49.66 timebase : 24907667 platform : PowerMac machine : PowerMac3,1 motherboard : PowerMac3,1 MacRISC2 MacRISC Power Macintosh detected as : 65 (PowerMac G4 AGP Graphics) pmac flags : 00000004 L2 cache : 1024K unified pmac-generation : NewWorld Memory: $ cat /proc/meminfo MemTotal: 1291852 kB Root Device: <IDE? SCSI? Name of device?> /dev/hda9 Root Size/partition table: Feel free to paste the full partition table, with notes on which partitions are mounted where. $ cat /testroot/etc/fstab # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda9 / ext3 errors=remount-ro 0 1 /dev/hda4 none swap sw 0 0 /dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0 Output of lspci and lspci -n: $ sudo lspci -vv 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes Capabilities: [80] AGP version 1.0 Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 0000:00:10.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 255 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at 94000000 (32-bit, prefetchable) [size=64M] Region 1: I/O ports at f0000400 [size=256] Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at f1000000 [disabled] [size=128K] Capabilities: [50] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=8 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes 0001:10:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 32 bytes Bus: primary=10, secondary=11, subordinate=11, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: 80000000-801fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 0001:11:03.0 Mass storage controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02) Subsystem: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 53 Region 0: I/O ports at f2001040 [size=8] Region 1: I/O ports at f2001030 [size=4] Region 2: I/O ports at f2001020 [size=8] Region 3: I/O ports at f2001010 [size=4] Region 4: I/O ports at f2001000 [size=16] Region 5: Memory at 80080000 (32-bit, non-prefetchable) [size=256] Expansion ROM at 80100000 [disabled] [size=512K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 0001:11:07.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K] 0001:11:08.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 27 Region 0: Memory at 80083000 (32-bit, non-prefetchable) [size=4K] 0001:11:09.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 28 Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K] 0001:11:0a.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (500ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 63 Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at 80084000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0002:21:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes 0002:21:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at f5000000 [disabled] [size=1M] Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [o] Configure network HW: [o] Config network: [o] Detect CD: [o] Load installer modules: [o] Detect hard drives: [o] Partition hard drives: [o] Create file systems: [o] Mount partitions: [o] Install base system: [o] Install boot loader: [o] Reboot: [o] Comments/Problems: <Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.> All went as expected during the install. However, after the reboot, the screen came up in 800x600 mode and could not be changed. I finall had to edit the xorg.conf file. Here's the diff: $ diff xorg.conf xorg.conf.ORIG 37,40c37 < Identifier "DELL 2001FP" < Option "DPMS" < HorizSync 31-80 < VertRefresh 56-76 --- > Identifier "Configured Monitor" 45,49c42 < Monitor "DELL 2001FP" < SubSection "Display" < Depth 24 < Modes "1600x1200" "1280x1024" "1272x1017" "1024x768" "880x660" "800x600" "760x608" "720x400" "640x480" < EndSubSection --- > Monitor "Configured Monitor" Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]