Your message dated Sat, 16 Feb 2008 11:32:04 +0000
with message-id <[EMAIL PROTECTED]>
and subject line Bug#459663: fixed in sane-backends 1.0.19-1
has caused the Debian Bug report #459663,
regarding Regression: scanimage / scanadf fail before scanning on Pixma MP780
since last upgrade
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [EMAIL PROTECTED]
immediately.)
--
459663: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=459663
Debian Bug Tracking System
Contact [EMAIL PROTECTED] with problems
--- Begin Message ---
Package: sane-utils
Version: 1.0.19~cvs20071213-1
Severity: important
I used to scan from the Gnome Desktop, through Gimp with either QuiteInsane,
XSane or xsaneimage.
It has recently been causing a complete failure of X11, abruptly killing the
session without scanning anything.
I then tried to reproduce the problem purely with command line interface, with
no more result (at least the session is not killed):
buradosentaa2:~# export SANE_DEBUG_PIXMA=10
buradosentaa2:~# export PIXMA_EXPERIMENT=10
buradosentaa2:~# scanimage -v -p -d pixma:04A91707_31AABD --source "Automatic
Document Feeder" -T
[sanei_debug] Setting debug level of pixma to 10.
[pixma] pixma version 0.13.1
[pixma] pixma_collect_devices() found Canon PIXMA MP780 at libusb:004:003
[pixma] pixma_open(): Canon PIXMA MP780
[pixma] Work-around for the problem: device doesn't response to the first
command.
[pixma] OUT T=0.364 len=10
[pixma] 00000000:e9 20 00 00 00 00 00 00 00 00
[pixma]
[pixma] IN T=1.367 len=-9
[pixma] ERROR: ETIMEDOUT
[pixma]
[pixma] Reading response of a dummy command failed: ETIMEDOUT
[pixma] BUG:reader_taskid(0) != 0
scanimage: received signal 15
scanimage: trying to stop scanner
[pixma] Reader task started
[pixma]
[pixma] pixma_scan(): start
[pixma] line_size=1920 image_size=1683840 channels=3 depth=8
[pixma] dpi=75x75 offset=(0,0) dimension=637x877
[pixma] gamma_table=0x61d840 source=1
[pixma] Reader task id=10445 (forked)
scanimage: scanning image of size 637x877 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1911 bytes... FAIL Error: Operation was
cancelled
[pixma] raw_width=640 raw_height=881 dpi=75
[pixma] OUT T=1.379 len=20
[pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00
[pixma] 00000010:00 00 00 ff
[pixma]
[pixma] IN T=1.753 len=2
[pixma] 00000000:06 06
[pixma]
[pixma] OUT T=1.753 len=10
[pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00
[pixma]
[pixma] IN T=1.757 len=14
[pixma] 00000000:06 06 03 00 00 02 03 00 02 03 0f 00 00 e4
[pixma]
[pixma] Current status: paper=0 cal=15 lamp=3
[pixma] OUT T=1.772 len=20
[pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00
[pixma] 00000010:00 00 00 ff
[pixma]
[pixma] IN T=2.153 len=2
[pixma] 00000000:06 06
[pixma]
[pixma] OUT T=2.170 len=20
[pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 20 00 00
[pixma] 00000010:00 00 00 df
[pixma]
[pixma] IN T=2.548 len=2
[pixma] 00000000:06 06
[pixma]
[pixma] OUT T=2.559 len=10
[pixma] 00000000:e9 20 00 00 00 00 00 00 00 00
[pixma]
[pixma] IN T=2.563 len=2
[pixma] 00000000:06 06
[pixma]
[pixma] OUT T=2.564 len=10
[pixma] 00000000:db 20 00 00 00 00 00 00 00 00
[pixma]
[pixma] IN T=2.777 len=2
[pixma] 00000000:06 06
[pixma]
[pixma] OUT T=2.777 len=20
[pixma] 00000000:dd 20 00 00 00 00 00 00 0a 00 02 01 00 00 00 00
[pixma] 00000010:00 00 00 fd
[pixma]
[pixma] IN T=2.780 len=2
[pixma] 00000000:06 06
[pixma]
[pixma] OUT T=2.780 len=56
[pixma] 00000000:de 20 00 00 00 00 00 00 2e 00 00 00 00 00 80 4b
[pixma] 00000010:80 4b 00 00 00 00 00 00 00 00 00 00 02 80 00 00
[pixma] 00000020:03 71 08 18 00 00 00 00 00 00 ff 00 00 81 00 00
[pixma] 00000030:02 01 00 01 00 00 00 d0
[pixma]
[pixma] IN T=2.784 len=2
[pixma] 00000000:06 06
[pixma]
[pixma] OUT T=2.786 len=10
[pixma] 00000000:ef 20 00 00 00 00 00 00 00 00
[pixma]
[pixma] IN T=2.999 len=2
[pixma] 00000000:06 06
[pixma]
[pixma] OUT T=2.999 len=10
[pixma] 00000000:ef 20 00 00 00 00 00 00 00 00
[pixma]
[pixma] IN T=3.003 len=2
[pixma] 00000000:15 15
[pixma]
[pixma] OUT T=3.003 len=10
[pixma] 00000000:ff 20 00 00 00 00 00 00 10 00
[pixma]
[pixma] IN T=3.007 len=18
[pixma] 00000000:06 06 70 00 05 00 00 00 00 06 00 00 00 00 2c 00
[pixma] 00000010:00 59
[pixma]
[pixma] OUT T=3.007 len=10
[pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00
[pixma]
[pixma] IN T=3.009 len=14
[pixma] 00000000:06 06 03 00 00 02 03 00 02 03 0f 00 00 e4
[pixma]
[pixma] Current status: paper=0 cal=15 lamp=3
[pixma] OUT T=3.010 len=20
[pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00
[pixma] 00000010:00 00 00 ff
[pixma]
[pixma] IN T=3.388 len=2
[pixma] 00000000:06 06
[pixma]
[pixma] pixma_read_image():cancelled by software
[pixma] Reader task terminated: ECANCELED
[pixma] pixma_close(): Canon PIXMA MP780
Complété
buradosentaa2:~# lsusb
....
Bus 004 Device 003: ID 04a9:1707 Canon, Inc.
....
buradosentaa2:~# lspci
00:00.0 Host bridge: ALi Corporation M1695 K8 Northbridge [PCI Express and
HyperTransport]
00:01.0 PCI bridge: ALi Corporation PCI Express Root Port
00:02.0 PCI bridge: ALi Corporation PCI Express Root Port
00:04.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip]
00:05.0 PCI bridge: ALi Corporation AGP8X Controller
00:06.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
00:07.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70)
00:07.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:08.0 Multimedia audio controller: ALi Corporation M5455 PCI AC-Link
Controller Audio Device (rev 20)
00:11.0 Ethernet controller: ALi Corporation ULi 1689,1573 integrated ethernet.
(rev 40)
00:12.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
00:12.1 Mass storage controller: ALi Corporation ULi 5289 SATA (rev 10)
00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:13.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:13.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:13.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
03:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE]
(rev 01)
03:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE]
(Secondary) (rev 01)
04:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture
(rev 11)
04:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev
11)
04:06.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet
Adapter (rev 11) (rev 11)
04:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller
(rev 46)
(the same behavior was observed with the more recent 2.6.22-3-amd64 kernel as
well)
Best regards.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.22-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages sane-utils depends on:
ii adduser 3.105 add and remove users and groups
ii libc6 2.7-5 GNU C Library: Shared libraries
ii libieee1284-3 0.2.11-3 cross-platform library for paralle
ii libjpeg62 6b-14 The Independent JPEG Group's JPEG
ii libsane 1.0.19~cvs20071213-1 API library for scanners
ii libtiff4 3.8.2-7 Tag Image File Format (TIFF) libra
ii libusb-0.1-4 2:0.1.12-8 userspace USB programming library
ii zlib1g 1:1.2.3.3.dfsg-8 compression library - runtime
sane-utils recommends no packages.
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: sane-backends
Source-Version: 1.0.19-1
We believe that the bug you reported is fixed in the latest version of
sane-backends, which is due to be installed in the Debian FTP archive:
libsane-dbg_1.0.19-1_amd64.deb
to pool/main/s/sane-backends/libsane-dbg_1.0.19-1_amd64.deb
libsane-dev_1.0.19-1_amd64.deb
to pool/main/s/sane-backends/libsane-dev_1.0.19-1_amd64.deb
libsane_1.0.19-1_amd64.deb
to pool/main/s/sane-backends/libsane_1.0.19-1_amd64.deb
sane-backends_1.0.19-1.diff.gz
to pool/main/s/sane-backends/sane-backends_1.0.19-1.diff.gz
sane-backends_1.0.19-1.dsc
to pool/main/s/sane-backends/sane-backends_1.0.19-1.dsc
sane-backends_1.0.19.orig.tar.gz
to pool/main/s/sane-backends/sane-backends_1.0.19.orig.tar.gz
sane-utils_1.0.19-1_amd64.deb
to pool/main/s/sane-backends/sane-utils_1.0.19-1_amd64.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [EMAIL PROTECTED],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Julien BLACHE <[EMAIL PROTECTED]> (supplier of updated sane-backends package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [EMAIL PROTECTED])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.7
Date: Tue, 12 Feb 2008 21:44:19 +0100
Source: sane-backends
Binary: sane-utils libsane libsane-dev libsane-dbg
Architecture: source amd64
Version: 1.0.19-1
Distribution: unstable
Urgency: low
Maintainer: Julien BLACHE <[EMAIL PROTECTED]>
Changed-By: Julien BLACHE <[EMAIL PROTECTED]>
Description:
libsane - API library for scanners
libsane-dbg - API development library for scanners [debug symbols]
libsane-dev - API development library for scanners [development files]
sane-utils - API library for scanners -- utilities
Closes: 458478 458932 459663
Changes:
sane-backends (1.0.19-1) unstable; urgency=low
.
* New upstream release.
+ New backends: cardscan (Corex Cardscan 800c), epjitsu (Epson-based
Fujitsu), epson2 (various Epson scanners), hp3900 (HP ScanJet 3970 and
more), hp5590 (HP ScanJet 5590 and more), hpljm1005 (HP LaserJet M1005
and more), hs2p (Ricoh IS400 series)
+ Fix for the pixma backend (closes: #459663).
+ Regression fix for the avision backend (closes: #458478, #458932).
* debian/patches/02_hurd_no_plustek_pp.dpatch:
+ Removed; merged upstream.
* debian/patches/11_minimum_linkage.dpatch:
+ Updated.
* debian/patches/12_new_configure.dpatch:
+ Updated.
* debian/control:
+ Adjust libsane-extras dependencies for 1.0.19.
Files:
695f311662127a081f2273ab98eb5772 948 graphics optional
sane-backends_1.0.19-1.dsc
1e50fa30888f63f774565e10008f9ad4 4355012 graphics optional
sane-backends_1.0.19.orig.tar.gz
500de4e2920eaa1eb8adfc4f6f07489b 33328 graphics optional
sane-backends_1.0.19-1.diff.gz
02a22dd3e5eaf5933c39cc025ff921d6 132702 graphics optional
sane-utils_1.0.19-1_amd64.deb
7d12d9c07b7cb152d6c2a76f53c1ee9d 3602300 libs optional
libsane_1.0.19-1_amd64.deb
db4e858e7640d52f7e1752c82dd83f6f 3101030 libdevel optional
libsane-dev_1.0.19-1_amd64.deb
0d06fbd57911eb74b44ed4e57f29b195 3552704 libdevel extra
libsane-dbg_1.0.19-1_amd64.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iD8DBQFHtsZLzWFP1/XWUWkRAk5eAJ40VLCTwkaTiE8gEa2332g/W3OadwCguIIU
9cfBp6S2qbxENKujjdSik2o=
=OtQy
-----END PGP SIGNATURE-----
--- End Message ---
