Your message dated Sun, 21 Dec 2008 11:00:18 +0100
with message-id <[email protected]>
and subject line Re: linux-image-2.6.24-1-686: cdrom nonfunctional, spews
errors on boot
has caused the Debian Bug report #481525,
regarding linux-image-2.6.24-1-686: cdrom nonfunctional, spews errors on boot
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
481525: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=481525
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-image-2.6.24-1-686
Version: 2.6.24-6
Severity: normal
I just upgraded from etch to lenny in order to get at some new software,
but now the CD/DVD drive doesn't work. There is a flood of errors on
boot, including a couple of soft-lockup traces, all apparently having
something to do with hdc (the cdrom). If I put a disc in the drive
and try to mount it, the command hangs and I get more IDE errors and
soft-lockup traces. (The mount command does eventually give up; it's
not a permanent hang.)
I've chopped the dmesg down to what appear to be the critical pieces,
please let me know if you need more information.
-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-6) ([email protected]) (gcc version
4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Sat Apr 19 00:37:55 UTC
2008
** Command line:
auto BOOT_IMAGE=Linux ro root=301
** Not tainted
** Kernel log:
ATIIXP: IDE controller (0x1002:0x4349 rev 0x00) at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD3200AAKB-00WHA0, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63
hda: cache flushes supported
hda: hda1 hda2
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: ATAPI CD-ROM drive, 0kB Cache
Uniform CD-ROM driver Revision: 3.20
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:659]
Pid: 659, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f8893dfb>] EFLAGS: 00000212 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 00000177
ESI: f88a75f8 EDI: f88a75a0 EBP: fffeee00 ESP: f66cfb30
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7e6f040 CR3: 365c0000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f8894262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core]
[<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d5c9a>] __blk_put_request+0x24/0x75
[<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core]
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<c01f7560>] vgacon_scroll+0x182/0x19d
[<f88ad498>] cdrom_read_capacity+0x57/0x85 [ide_cd]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f88ae1d3>] cdrom_read_toc+0x94/0x3ff [ide_cd]
[<f889a7bf>] __ide_add_setting+0xb6/0xd3 [ide_core]
[<f889ab09>] ide_add_setting+0x48/0x4d [ide_core]
[<f88aee58>] ide_cd_probe+0x91a/0x947 [ide_cd]
[<c01884d0>] iput+0x39/0x62
[<c01b1783>] sysfs_addrm_finish+0x4a/0x194
[<c01b155b>] sysfs_add_one+0xaf/0xb8
[<c01b15b4>] sysfs_addrm_start+0x50/0x81
[<c01b20f3>] sysfs_create_link+0xb8/0xfd
[<f8891054>] generic_ide_probe+0x1c/0x1d [ide_core]
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
[<c0240dfa>] bus_for_each_dev+0x37/0x59
[<c0241687>] driver_attach+0x16/0x18
[<c0241930>] __driver_attach+0x0/0x79
[<c02410e0>] bus_add_driver+0x6d/0x197
[<c0143721>] sys_init_module+0x15db/0x16f3
[<c016406e>] vma_prio_tree_insert+0x17/0x2a
[<c012c7c0>] msleep+0x0/0x12
[<c0103ed6>] syscall_call+0x7/0xb
=======================
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:659]
Pid: 659, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f8893dfb>] EFLAGS: 00000202 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 00000177
ESI: f88a75f8 EDI: f88a75a0 EBP: fffef7c6 ESP: f66cfb38
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7e6f040 CR3: 365c0000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f8894262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core]
[<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d5c9a>] __blk_put_request+0x24/0x75
[<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core]
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<c01f7560>] vgacon_scroll+0x182/0x19d
[<f88ad436>] cdrom_read_tocentry+0x93/0x9e [ide_cd]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f88ae2e7>] cdrom_read_toc+0x1a8/0x3ff [ide_cd]
[<f88aee58>] ide_cd_probe+0x91a/0x947 [ide_cd]
[<c01884d0>] iput+0x39/0x62
[<c01b1783>] sysfs_addrm_finish+0x4a/0x194
[<c01b155b>] sysfs_add_one+0xaf/0xb8
[<c01b15b4>] sysfs_addrm_start+0x50/0x81
[<c01b20f3>] sysfs_create_link+0xb8/0xfd
[<f8891054>] generic_ide_probe+0x1c/0x1d [ide_core]
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
[<c0240dfa>] bus_for_each_dev+0x37/0x59
[<c0241687>] driver_attach+0x16/0x18
[<c0241930>] __driver_attach+0x0/0x79
[<c02410e0>] bus_add_driver+0x6d/0x197
[<c0143721>] sys_init_module+0x15db/0x16f3
[<c016406e>] vma_prio_tree_insert+0x17/0x2a
[<c012c7c0>] msleep+0x0/0x12
[<c0103ed6>] syscall_call+0x7/0xb
=======================
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:659]
Pid: 659, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f8893dfb>] EFLAGS: 00000202 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 00000177
ESI: f88a75f8 EDI: f88a75a0 EBP: ffff066f ESP: f66cfa8c
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7e6f040 CR3: 365c0000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f8894262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core]
[<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d5c9a>] __blk_put_request+0x24/0x75
[<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core]
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<f88b0517>] ide_cdrom_packet+0x80/0x9f [ide_cd]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f88b8fac>] cdrom_get_disc_info+0x6c/0x79 [cdrom]
[<f88b9085>] cdrom_get_last_written+0x2e/0x106 [cdrom]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f88ae4d7>] cdrom_read_toc+0x398/0x3ff [ide_cd]
[<f88aee58>] ide_cd_probe+0x91a/0x947 [ide_cd]
[<c01884d0>] iput+0x39/0x62
[<c01b1783>] sysfs_addrm_finish+0x4a/0x194
[<c01b155b>] sysfs_add_one+0xaf/0xb8
[<c01b15b4>] sysfs_addrm_start+0x50/0x81
[<c01b20f3>] sysfs_create_link+0xb8/0xfd
[<f8891054>] generic_ide_probe+0x1c/0x1d [ide_core]
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
[<c0240dfa>] bus_for_each_dev+0x37/0x59
[<c0241687>] driver_attach+0x16/0x18
[<c0241930>] __driver_attach+0x0/0x79
[<c02410e0>] bus_add_driver+0x6d/0x197
[<c0143721>] sys_init_module+0x15db/0x16f3
[<c016406e>] vma_prio_tree_insert+0x17/0x2a
[<c012c7c0>] msleep+0x0/0x12
[<c0103ed6>] syscall_call+0x7/0xb
=======================
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
# ... several dozen more "status timeout" messages
# on attempting to mount a disc:
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
BUG: soft lockup - CPU#1 stuck for 11s! [mount:2368]
Pid: 2368, comm: mount Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f8893dfb>] EFLAGS: 00200202 CPU: 1
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00200282 ECX: 00000000 EDX: 00000177
ESI: f88a75f8 EDI: f88a75a0 EBP: 0003d1d5 ESP: f698bb00
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7e81f00 CR3: 366e5000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f8894262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core]
[<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core]
[<c01d5c9a>] __blk_put_request+0x24/0x75
[<c01d5eec>] blk_put_request+0x22/0x36
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3f63>] elv_insert+0x107/0x1ea
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<c01a5e58>] pid_revalidate+0x5a/0xc5
[<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core]
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<f88ad59c>] cdrom_check_status+0x55/0x60 [ide_cd]
[<f88b0517>] ide_cdrom_packet+0x80/0x9f [ide_cd]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f88bbc76>] cdrom_open+0x35f/0x915 [cdrom]
[<c0180ad0>] link_path_walk+0xa9/0xb3
[<f89deef5>] xfs_log_move_tail+0x42/0x14d [xfs]
[<c01872e4>] __d_lookup+0x91/0xe5
[<c017ea42>] do_lookup+0x4f/0x140
[<c0186ae0>] dput+0x15/0xdc
[<c0180904>] __link_path_walk+0xa28/0xb4b
[<f89deef5>] xfs_log_move_tail+0x42/0x14d [xfs]
[<c01872e4>] __d_lookup+0x91/0xe5
[<c018a8fe>] mntput_no_expire+0x11/0x66
[<c0180ad0>] link_path_walk+0xa9/0xb3
[<c01d9750>] exact_lock+0x7/0xd
[<c0243196>] kobj_lookup+0xe4/0x10e
[<f88adedf>] idecd_open+0x78/0x8c [ide_cd]
[<c0198481>] do_open+0x87/0x255
[<c01987dd>] blkdev_open+0x0/0x4d
[<c0198802>] blkdev_open+0x25/0x4d
[<c0176ecb>] __dentry_open+0xce/0x185
[<c0176ffc>] nameidata_to_filp+0x24/0x33
[<c017703d>] do_filp_open+0x32/0x39
[<c0176d89>] get_unused_fd_flags+0x4d/0xba
[<c0177088>] do_sys_open+0x44/0xc0
[<c017713d>] sys_open+0x1c/0x1e
[<c0103e5e>] sysenter_past_esp+0x6b/0xa1
[<c02b0000>] unix_state_double_lock+0x10/0x3c
=======================
BUG: soft lockup - CPU#0 stuck for 11s! [hald-addon-stor:1974]
Pid: 1974, comm: hald-addon-stor Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<c02bdc90>] EFLAGS: 00000286 CPU: 0
EIP is at lock_kernel+0x17/0x2c
EAX: f65218b0 EBX: f74473c0 ECX: 00000000 EDX: 00000000
ESI: f72835c0 EDI: fffffff4 EBP: c01987dd ESP: f72bdec0
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7f14195 CR3: 0391f000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<c019841d>] do_open+0x23/0x255
[<c01987dd>] blkdev_open+0x0/0x4d
[<c0198802>] blkdev_open+0x25/0x4d
[<c0176ecb>] __dentry_open+0xce/0x185
[<c0176ffc>] nameidata_to_filp+0x24/0x33
[<c017703d>] do_filp_open+0x32/0x39
[<c0176d89>] get_unused_fd_flags+0x4d/0xba
[<c0177088>] do_sys_open+0x44/0xc0
[<c017713d>] sys_open+0x1c/0x1e
[<c0103e5e>] sysenter_past_esp+0x6b/0xa1
=======================
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
** Loaded modules:
Module Size Used by
ac 6116 0
battery 13572 0
ipv6 240836 14
firewire_sbp2 14252 0
loop 16804 0
snd_atiixp 18988 0
snd_ac97_codec 92932 1 snd_atiixp
ac97_bus 2176 1 snd_ac97_codec
snd_pcm_oss 38272 0
snd_pcm 71780 3 snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_mixer_oss 15296 1 snd_pcm_oss
snd_seq_dummy 3780 0
evdev 11104 2
snd_seq_oss 29472 0
snd_seq_midi_event 6976 1 snd_seq_oss
snd_seq 46544 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer 21092 2 snd_pcm,snd_seq
snd_seq_device 7820 3 snd_seq_dummy,snd_seq_oss,snd_seq
i2c_piix4 8428 0
button 8432 0
psmouse 36464 0
i2c_core 22432 1 i2c_piix4
serio_raw 6660 0
irtty_sir 8096 0
ati_agp 8684 1
snd 48612 9
snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
sir_dev 15460 1 irtty_sir
shpchp 31028 0
pci_hotplug 27712 1 shpchp
agpgart 31688 1 ati_agp
soundcore 7552 1 snd
irda 174236 2 irtty_sir,sir_dev
rtc 13052 0
snd_page_alloc 10056 2 snd_atiixp,snd_pcm
crc_ccitt 2176 1 irda
pcspkr 3200 0
xfs 500056 2
sd_mod 27200 0
ide_cd 36224 0
cdrom 32512 1 ide_cd
ide_disk 15648 3
usb_storage 77536 0
scsi_mod 141164 3 firewire_sbp2,sd_mod,usb_storage
atiixp 4592 0 [permanent]
firewire_ohci 17760 0
firewire_core 39232 2 firewire_sbp2,firewire_ohci
crc_itu_t 2176 1 firewire_core
8139too 25600 0
mii 5312 1 8139too
ide_core 108292 3 ide_cd,ide_disk,atiixp
ohci_hcd 21988 0
ehci_hcd 32524 0
usbcore 132940 4 usb_storage,ohci_hcd,ehci_hcd
thermal 16028 0
processor 36520 1 thermal
fan 4772 0
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc Radeon 9100 IGP Host Bridge
[1002:5833] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at e0204000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: agpgart-ati
Kernel modules: ati-agp
00:01.0 PCI bridge [0604]: ATI Technologies Inc Radeon 9100 IGP AGP Bridge
[1002:5838]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e0000000-e00fffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:13.0 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #1
[1002:4347] (rev 01) (prog-if 10)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #2
[1002:4348] (rev 01) (prog-if 10)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc EHCI USB Controller
[1002:4345] (rev 01) (prog-if 20)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0202000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SMBus [1002:4353] (rev 17)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at e000 [size=16]
Region 1: Memory at e0203000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc Dual Channel Bus Master PCI
IDE Controller [1002:4349] (prog-if 8a [Master SecP PriP])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: ATIIXP_IDE
Kernel modules: atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc Device [1002:434c]
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP200 3COM 3C920B Ethernet
Controller [1002:4342] (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e0100000-e01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP150 AC'97
Audio Controller [1002:4341]
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:c0b1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e0205000 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: ATI IXP AC97 controller
Kernel modules: snd-atiixp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon 9100 IGP
[1002:5834]
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at e0020000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
02:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
[10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at e0110000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at e0100000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
02:06.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host
Controller [1106:3044] (rev 80) (prog-if 10)
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0111000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at d400 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-686 depends on:
ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-1-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
--- End Message ---
--- Begin Message ---
Version: 2.6.26-1
On Sat, Dec 20, 2008 at 08:04:07PM -0800, Zack Weinberg wrote:
> On Sat, Dec 20, 2008 at 4:25 PM, Moritz Muehlenhoff <[email protected]> wrote:
> >> I just upgraded from etch to lenny in order to get at some new software,
> >> but now the CD/DVD drive doesn't work.
> >
> > Does this error still occur with more recent kernel versions?
>
> No, it went away with either .25 or .26, I don't remember exactly (or
> even if there was a .25 package).
Thanks, closing the bug as fixed in 2.6.26 then.
Cheers,
Moritz
--- End Message ---
