Your message dated Fri, 8 May 2009 20:43:48 +0200 with message-id <[email protected]> and subject line Re: Bug#526972: qemubuilder: Can't set up networking on armel has caused the Debian Bug report #526972, regarding qemubuilder: Can't set up networking on armel to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 526972: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=526972 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: qemubuilder Version: 0.55 Severity: normal Hi! Sorry to bother you again but qemubuilder is just to usefull to ignore ;) I finally managed to find an armel kernel[0] that boots fine here. However, the created qemu environment ends up with non-working network making it impossible to use. --login works fine however but I don't know off-hand how to try setting network there so I haven't done that right now. Regards Christoph [0] http://people.debian.org/~aurel32/qemu/armel/ -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'stable'), (400, 'unstable'), (100, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.29-1-686 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages qemubuilder depends on: ii debootstrap 1.0.10lenny1 Bootstrap a basic Debian system ii libc6 2.9-4 GNU C Library: Shared libraries ii pbuilder 0.187 personal package builder for Debia ii qemu 0.10.3-1 fast processor emulator qemubuilder recommends no packages. qemubuilder suggests no packages. -- no debconf information -- /"\ ASCII Ribbon : GPG-Key ID: 0x0372275D \ / Campaign : X against HTML : Debian NM / \ in eMails : http://www.debian.org/ http://www.christoph-egger.org/$ sudo LANG="C" qemubuilder --create --configfile /home/christoph/.pbuilderrc-arm forking: mke2fs -q -F -j -m1 -O sparse_super /media/extern/freeart/qemubuilder-arm/base forking: tune2fs -c 0 -i 0 /media/extern/freeart/qemubuilder-arm/base tune2fs 1.41.3 (12-Oct-2008) Setting maximal mount count to -1 Setting interval between checks to 0 seconds forking: mount -o loop /media/extern/freeart/qemubuilder-arm/base /var/cache/pbuilder/build//qemu.30361 -> Invoking debootstrap forking: debootstrap --arch armel --foreign sid /var/cache/pbuilder/build//qemu.30361 ftp://ftp.de.debian.org/debian I: Retrieving Release I: Retrieving Packages I: Validating Packages I: Resolving dependencies of required packages... I: Resolving dependencies of base packages... I: Found additional required dependencies: libdb4.7 I: Checking component main on ftp://ftp.de.debian.org/debian... I: Retrieving adduser I: Validating adduser I: Retrieving apt I: Validating apt I: Retrieving apt-utils I: Validating apt-utils I: Retrieving aptitude I: Validating aptitude I: Retrieving base-files I: Validating base-files I: Retrieving base-passwd I: Validating base-passwd I: Retrieving bash I: Validating bash I: Retrieving bsdmainutils I: Validating bsdmainutils I: Retrieving bsdutils I: Validating bsdutils I: Retrieving coreutils I: Validating coreutils I: Retrieving cpio I: Validating cpio I: Retrieving cron I: Validating cron I: Retrieving debconf I: Validating debconf I: Retrieving debconf-i18n I: Validating debconf-i18n I: Retrieving debian-archive-keyring I: Validating debian-archive-keyring I: Retrieving debianutils I: Validating debianutils I: Retrieving dhcp3-client I: Validating dhcp3-client I: Retrieving dhcp3-common I: Validating dhcp3-common I: Retrieving diff I: Validating diff I: Retrieving dpkg I: Validating dpkg I: Retrieving e2fslibs I: Validating e2fslibs I: Retrieving e2fsprogs I: Validating e2fsprogs I: Retrieving ed I: Validating ed I: Retrieving findutils I: Validating findutils I: Retrieving gcc-4.2-base I: Validating gcc-4.2-base I: Retrieving gcc-4.3-base I: Validating gcc-4.3-base I: Retrieving gnupg I: Validating gnupg I: Retrieving gpgv I: Validating gpgv I: Retrieving grep I: Validating grep I: Retrieving groff-base I: Validating groff-base I: Retrieving gzip I: Validating gzip I: Retrieving hostname I: Validating hostname I: Retrieving ifupdown I: Validating ifupdown I: Retrieving info I: Validating info I: Retrieving initscripts I: Validating initscripts I: Retrieving iproute I: Validating iproute I: Retrieving iptables I: Validating iptables I: Retrieving iputils-ping I: Validating iputils-ping I: Retrieving libacl1 I: Validating libacl1 I: Retrieving libattr1 I: Validating libattr1 I: Retrieving libblkid1 I: Validating libblkid1 I: Retrieving libbz2-1.0 I: Validating libbz2-1.0 I: Retrieving libc6 I: Validating libc6 I: Retrieving libcomerr2 I: Validating libcomerr2 I: Retrieving libconsole I: Validating libconsole I: Retrieving libcwidget3 I: Validating libcwidget3 I: Retrieving libdb4.6 I: Validating libdb4.6 I: Retrieving libdb4.7 I: Validating libdb4.7 I: Retrieving libdevmapper1.02.1 I: Validating libdevmapper1.02.1 I: Retrieving libept0 I: Validating libept0 I: Retrieving libgcc1 I: Validating libgcc1 I: Retrieving libgcrypt11 I: Validating libgcrypt11 I: Retrieving libgdbm3 I: Validating libgdbm3 I: Retrieving libgnutls26 I: Validating libgnutls26 I: Retrieving libgpg-error0 I: Validating libgpg-error0 I: Retrieving liblocale-gettext-perl I: Validating liblocale-gettext-perl I: Retrieving libncurses5 I: Validating libncurses5 I: Retrieving libncursesw5 I: Validating libncursesw5 I: Retrieving libnewt0.52 I: Validating libnewt0.52 I: Retrieving libpam-modules I: Validating libpam-modules I: Retrieving libpam-runtime I: Validating libpam-runtime I: Retrieving libpam0g I: Validating libpam0g I: Retrieving libpopt0 I: Validating libpopt0 I: Retrieving libreadline5 I: Validating libreadline5 I: Retrieving libsasl2-2 I: Validating libsasl2-2 I: Retrieving libselinux1 I: Validating libselinux1 I: Retrieving libsepol1 I: Validating libsepol1 I: Retrieving libsigc++-2.0-0c2a I: Validating libsigc++-2.0-0c2a I: Retrieving libslang2 I: Validating libslang2 I: Retrieving libss2 I: Validating libss2 I: Retrieving libssl0.9.8 I: Validating libssl0.9.8 I: Retrieving libstdc++6 I: Validating libstdc++6 I: Retrieving libtasn1-3 I: Validating libtasn1-3 I: Retrieving libtext-charwidth-perl I: Validating libtext-charwidth-perl I: Retrieving libtext-iconv-perl I: Validating libtext-iconv-perl I: Retrieving libtext-wrapi18n-perl I: Validating libtext-wrapi18n-perl I: Retrieving libusb-0.1-4 I: Validating libusb-0.1-4 I: Retrieving libusb-1.0-0 I: Validating libusb-1.0-0 I: Retrieving libuuid1 I: Validating libuuid1 I: Retrieving libvolume-id1 I: Validating libvolume-id1 I: Retrieving libwrap0 I: Validating libwrap0 I: Retrieving libxapian15 I: Validating libxapian15 I: Retrieving login I: Validating login I: Retrieving logrotate I: Validating logrotate I: Retrieving lsb-base I: Validating lsb-base I: Retrieving lzma I: Validating lzma I: Retrieving makedev I: Validating makedev I: Retrieving man-db I: Validating man-db I: Retrieving manpages I: Validating manpages I: Retrieving mawk I: Validating mawk I: Retrieving mktemp I: Validating mktemp I: Retrieving module-init-tools I: Validating module-init-tools I: Retrieving mount I: Validating mount I: Retrieving nano I: Validating nano I: Retrieving ncurses-base I: Validating ncurses-base I: Retrieving ncurses-bin I: Validating ncurses-bin I: Retrieving net-tools I: Validating net-tools I: Retrieving netbase I: Validating netbase I: Retrieving netcat-traditional I: Validating netcat-traditional I: Retrieving passwd I: Validating passwd I: Retrieving perl-base I: Validating perl-base I: Retrieving procps I: Validating procps I: Retrieving readline-common I: Validating readline-common I: Retrieving rsyslog I: Validating rsyslog I: Retrieving sed I: Validating sed I: Retrieving sensible-utils I: Validating sensible-utils I: Retrieving sysv-rc I: Validating sysv-rc I: Retrieving sysvinit I: Validating sysvinit I: Retrieving sysvinit-utils I: Validating sysvinit-utils I: Retrieving tar I: Validating tar I: Retrieving tasksel I: Validating tasksel I: Retrieving tasksel-data I: Validating tasksel-data I: Retrieving tcpd I: Validating tcpd I: Retrieving traceroute I: Validating traceroute I: Retrieving tzdata I: Validating tzdata I: Retrieving udev I: Validating udev I: Retrieving util-linux I: Validating util-linux I: Retrieving vim-common I: Validating vim-common I: Retrieving vim-tiny I: Validating vim-tiny I: Retrieving wget I: Validating wget I: Retrieving whiptail I: Validating whiptail I: Retrieving zlib1g I: Validating zlib1g I: Extracting base-files... I: Extracting base-passwd... I: Extracting bash... I: Extracting bsdutils... I: Extracting coreutils... I: Extracting debconf... I: Extracting debconf-i18n... I: Extracting debianutils... I: Extracting diff... I: Extracting dpkg... I: Extracting e2fslibs... I: Extracting e2fsprogs... I: Extracting findutils... I: Extracting gcc-4.2-base... I: Extracting gcc-4.3-base... I: Extracting grep... I: Extracting gzip... I: Extracting hostname... I: Extracting initscripts... I: Extracting libacl1... I: Extracting libattr1... I: Extracting libblkid1... I: Extracting libc6... I: Extracting libcomerr2... I: Extracting libdb4.6... I: Extracting libdb4.7... I: Extracting libdevmapper1.02.1... I: Extracting libgcc1... I: Extracting liblocale-gettext-perl... I: Extracting libncurses5... I: Extracting libpam-modules... I: Extracting libpam-runtime... I: Extracting libpam0g... I: Extracting libselinux1... I: Extracting libsepol1... I: Extracting libslang2... I: Extracting libss2... I: Extracting libstdc++6... I: Extracting libtext-charwidth-perl... I: Extracting libtext-iconv-perl... I: Extracting libtext-wrapi18n-perl... I: Extracting libuuid1... I: Extracting libvolume-id1... I: Extracting login... I: Extracting lsb-base... I: Extracting lzma... I: Extracting makedev... I: Extracting mawk... I: Extracting mktemp... I: Extracting mount... I: Extracting ncurses-base... I: Extracting ncurses-bin... I: Extracting passwd... I: Extracting perl-base... I: Extracting procps... I: Extracting sed... I: Extracting sensible-utils... I: Extracting sysv-rc... I: Extracting sysvinit... I: Extracting sysvinit-utils... I: Extracting tar... I: Extracting tzdata... I: Extracting util-linux... I: Extracting zlib1g... -> Doing arch-specific /dev population mkdir chroot-/dev: File exists forking: umount /var/cache/pbuilder/build//qemu.30361 forking: mke2fs -q -F -j -m1 -O sparse_super /var/cache/pbuilder/build//qemu.30361.dev forking: tune2fs -c 0 -i 0 /var/cache/pbuilder/build//qemu.30361.dev tune2fs 1.41.3 (12-Oct-2008) Setting maximal mount count to -1 Setting interval between checks to 0 seconds forking: mount -o loop /var/cache/pbuilder/build//qemu.30361.dev /var/cache/pbuilder/build//qemu.30361 forking: umount /var/cache/pbuilder/build//qemu.30361.dev forking qemu: qemu-system-arm -nographic -M versatilepb -m 194 -kernel /media/extern/freeart/qemubuilder-arm/vmlinuz-2.6.26-1-versatile -initrd /media/extern/freeart/qemubuilder-arm/initrd.img-2.6.26-1-versatile -hda /media/extern/freeart/qemubuilder-arm/base -hdb /var/cache/pbuilder/build//qemu.30361.dev -append root=/dev/sda quiet init=/pbuilder-run console=ttyAMA0 -serial stdio Uncompressing Linux...................................................................................... done, booting the kernel. [ 0.000000] CLCD: unknown LCD panel ID 0x00001000, using VGA Loading, please wait... -> qemu-pbuilder first-stage mount: proc already mounted -> qemu-pbuilder second-stage -> setting time to Mon May 4 16:54:07 2009 Mon May 4 16:54:07 UTC 2009 -> Running debootstrap second-stage script I: Installing core packages... I: Unpacking required packages... I: Unpacking base-files... I: Unpacking base-passwd... I: Unpacking bash... I: Unpacking bsdutils... I: Unpacking coreutils... I: Unpacking debconf... I: Unpacking debconf-i18n... I: Unpacking debianutils... I: Unpacking diff... I: Unpacking dpkg... I: Unpacking e2fslibs... I: Unpacking e2fsprogs... I: Unpacking findutils... I: Unpacking gcc-4.2-base... I: Unpacking gcc-4.3-base... I: Unpacking grep... I: Unpacking gzip... I: Unpacking hostname... I: Unpacking initscripts... I: Unpacking libacl1... I: Unpacking libattr1... I: Unpacking libblkid1... I: Unpacking libc6... I: Unpacking libcomerr2... I: Unpacking libdb4.6... I: Unpacking libdb4.7... I: Unpacking libdevmapper1.02.1... I: Unpacking libgcc1... I: Unpacking liblocale-gettext-perl... I: Unpacking libncurses5... I: Unpacking libpam-modules... I: Unpacking libpam-runtime... I: Unpacking libpam0g... I: Unpacking libselinux1... I: Unpacking libsepol1... I: Unpacking libslang2... I: Unpacking libss2... I: Unpacking libstdc++6... I: Unpacking libtext-charwidth-perl... I: Unpacking libtext-iconv-perl... I: Unpacking libtext-wrapi18n-perl... I: Unpacking libuuid1... I: Unpacking libvolume-id1... I: Unpacking login... I: Unpacking lsb-base... I: Unpacking lzma... I: Unpacking makedev... I: Unpacking mawk... I: Unpacking mktemp... I: Unpacking mount... I: Unpacking ncurses-base... I: Unpacking ncurses-bin... I: Unpacking passwd... I: Unpacking perl-base... I: Unpacking procps... I: Unpacking sed... I: Unpacking sensible-utils... I: Unpacking sysv-rc... I: Unpacking sysvinit... I: Unpacking sysvinit-utils... I: Unpacking tar... I: Unpacking tzdata... I: Unpacking util-linux... I: Unpacking zlib1g... I: Configuring required packages... I: Configuring sensible-utils... I: Configuring sysv-rc... I: Configuring gcc-4.2-base... I: Configuring gcc-4.3-base... I: Configuring libc6... I: Configuring mktemp... I: Configuring debianutils... I: Configuring bsdutils... I: Configuring libsepol1... I: Configuring libgcc1... I: Configuring libncurses5... I: Configuring libattr1... I: Configuring sed... I: Configuring base-passwd... I: Configuring libcomerr2... I: Configuring mawk... I: Configuring libdb4.6... I: Configuring libdb4.7... I: Configuring grep... I: Configuring hostname... I: Configuring libacl1... I: Configuring libslang2... I: Configuring libss2... I: Configuring findutils... I: Configuring gzip... I: Configuring diff... I: Configuring libvolume-id1... I: Configuring libselinux1... I: Configuring libstdc++6... I: Configuring coreutils... I: Configuring makedev... I: Configuring lzma... I: Configuring ncurses-base... I: Configuring ncurses-bin... I: Configuring tar... I: Configuring zlib1g... I: Configuring base-files... I: Configuring libdevmapper1.02.1... I: Configuring e2fslibs... I: Configuring dpkg... I: Configuring sysvinit-utils... I: Configuring bash... I: Configuring lsb-base... I: Configuring procps... I: Configuring perl-base... I: Configuring libtext-iconv-perl... I: Configuring liblocale-gettext-perl... I: Configuring libtext-charwidth-perl... I: Configuring libtext-wrapi18n-perl... I: Configuring debconf-i18n... I: Configuring debconf... I: Configuring tzdata... I: Configuring libpam-runtime... I: Configuring libpam0g... I: Configuring libpam-modules... I: Configuring passwd... I: Configuring login... I: Configuring libuuid1... I: Configuring libblkid1... I: Configuring e2fsprogs... I: Configuring util-linux... I: Configuring mount... I: Configuring initscripts... I: Configuring sysvinit... I: Unpacking the base system... I: Unpacking adduser... I: Unpacking apt... I: Unpacking apt-utils... I: Unpacking aptitude... I: Unpacking bsdmainutils... I: Unpacking cpio... I: Unpacking cron... I: Unpacking debian-archive-keyring... I: Unpacking dhcp3-client... I: Unpacking dhcp3-common... I: Unpacking ed... I: Unpacking gnupg... I: Unpacking gpgv... I: Unpacking groff-base... I: Unpacking ifupdown... I: Unpacking info... I: Unpacking iproute... I: Unpacking iptables... I: Unpacking iputils-ping... I: Unpacking libbz2-1.0... I: Unpacking libconsole... I: Unpacking libcwidget3... I: Unpacking libept0... I: Unpacking libgcrypt11... I: Unpacking libgdbm3... I: Unpacking libgnutls26... I: Unpacking libgpg-error0... I: Unpacking libncursesw5... I: Unpacking libnewt0.52... I: Unpacking libpopt0... I: Unpacking libreadline5... I: Unpacking libsasl2-2... I: Unpacking libsigc++-2.0-0c2a... I: Unpacking libssl0.9.8... I: Unpacking libtasn1-3... I: Unpacking libusb-0.1-4... I: Unpacking libusb-1.0-0... I: Unpacking libwrap0... I: Unpacking libxapian15... I: Unpacking logrotate... I: Unpacking man-db... I: Unpacking manpages... I: Unpacking module-init-tools... I: Unpacking nano... I: Unpacking net-tools... I: Unpacking netbase... I: Unpacking netcat-traditional... I: Unpacking readline-common... I: Unpacking rsyslog... I: Unpacking tasksel... I: Unpacking tasksel-data... I: Unpacking tcpd... I: Unpacking traceroute... I: Unpacking udev... I: Unpacking vim-common... I: Unpacking vim-tiny... I: Unpacking wget... I: Unpacking whiptail... I: Configuring the base system... I: Configuring module-init-tools... I: Configuring libgdbm3... I: Configuring libtasn1-3... I: Configuring libpopt0... I: Configuring libusb-0.1-4... I: Configuring libgpg-error0... I: Configuring libssl0.9.8... I: Configuring vim-common... I: Configuring netbase... I: Configuring libxapian15... I: Configuring libusb-1.0-0... I: Configuring adduser... I: Configuring traceroute... I: Configuring ed... I: Configuring manpages... I: Configuring iproute... I: Configuring wget... I: Configuring groff-base... I: Configuring libnewt0.52... I: Configuring net-tools... I: Configuring libsasl2-2... I: Configuring bsdmainutils... I: Configuring libsigc++-2.0-0c2a... I: Configuring netcat-traditional... I: Configuring libncursesw5... I: Configuring info... I: Configuring iputils-ping... I: Configuring libbz2-1.0... I: Configuring cron... I: Configuring nano... I: Configuring dhcp3-common... I: Configuring libconsole... I: Configuring udev... I: Configuring iptables... I: Configuring rsyslog... I: Configuring cpio... I: Configuring vim-tiny... I: Configuring readline-common... I: Configuring libwrap0... I: Configuring tcpd... I: Configuring man-db... I: Configuring libgcrypt11... I: Configuring whiptail... I: Configuring ifupdown... I: Configuring dhcp3-client... I: Configuring libreadline5... I: Configuring logrotate... I: Configuring libcwidget3... I: Configuring libgnutls26... I: Configuring gpgv... I: Configuring gnupg... I: Configuring debian-archive-keyring... I: Configuring apt... I: Configuring libept0... I: Configuring apt-utils... I: Configuring aptitude... I: Configuring tasksel-data... I: Configuring tasksel... I: Base system installed successfully. Internet Systems Consortium DHCP Client V3.1.2 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ modprobe: FATAL: Could not load /lib/modules/2.6.26-1-versatile/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.26-1-versatile/modules.dep: No such file or directory SIOCSIFADDR: No such device modprobe: FATAL: Could not load /lib/modules/2.6.26-1-versatile/modules.dep: No such file or directory eth0: ERROR while getting interface flags: No such device modprobe: FATAL: Could not load /lib/modules/2.6.26-1-versatile/modules.dep: No such file or directory eth0: ERROR while getting interface flags: No such device modprobe: FATAL: Could not load /lib/modules/2.6.26-1-versatile/modules.dep: No such file or directory Bind socket to interface: No such device I: copying /etc/hosts from temporary location I: copying /etc/hostname from temporary location Err ftp://ftp.de.debian.org sid Release.gpg Could not resolve 'ftp.de.debian.org' Reading package lists... Done W: Failed to fetch ftp://ftp.de.debian.org/debian/dists/sid/Release.gpg Could not resolve 'ftp.de.debian.org' W: Some index files failed to download, they have been ignored, or old ones used instead. W: You may want to run apt-get update to correct these problems Reading package lists... Done Building dependency tree... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Done Building dependency tree... Done E: Couldn't find package build-essential -> received termination message from inside qemu with exit-code 0, killing child process (qemu:1143) -> successfully killed qemu$ sudo LANG="C" qemubuilder --update --configfile /home/christoph/.pbuilderrc-arm forking: /sbin/fsck /media/extern/freeart/qemubuilder-arm/base fsck 1.41.3 (12-Oct-2008) e2fsck 1.41.3 (12-Oct-2008) /media/extern/freeart/qemubuilder-arm/base: clean, 8875/196608 files, 77046/786431 blocks forking: mke2fs -q -F -j -m1 -O sparse_super /var/cache/pbuilder/build//qemu.4615.dev forking: tune2fs -c 0 -i 0 /var/cache/pbuilder/build//qemu.4615.dev tune2fs 1.41.3 (12-Oct-2008) Setting maximal mount count to -1 Setting interval between checks to 0 seconds forking: mount -o loop /var/cache/pbuilder/build//qemu.4615.dev /var/cache/pbuilder/build//qemu.4615 forking: umount /var/cache/pbuilder/build//qemu.4615.dev ioctl: LOOP_CLR_FD: Device or resource busy forking: qemu-img create -f qcow -b /media/extern/freeart/qemubuilder-arm/base /var/cache/pbuilder/build//qemu.4615.cowdev Formatting '/var/cache/pbuilder/build//qemu.4615.cowdev', fmt=qcow, backing_file=/media/extern/freeart/qemubuilder-arm/base, size=3145727 kB forking qemu: qemu-system-arm -nographic -M versatilepb -m 194 -kernel /media/extern/freeart/qemubuilder-arm/vmlinuz-2.6.26-1-versatile -initrd /media/extern/freeart/qemubuilder-arm/initrd.img-2.6.26-1-versatile -hda /var/cache/pbuilder/build//qemu.4615.cowdev -hdb /var/cache/pbuilder/build//qemu.4615.dev -append root=/dev/sda quiet init=/pbuilder-run console=ttyAMA0 -serial stdio Uncompressing Linux...................................................................................... done, booting the kernel. [ 0.000000] CLCD: unknown LCD panel ID 0x00001000, using VGA Loading, please wait... -> qemu-pbuilder first-stage mount: proc already mounted -> qemu-pbuilder second-stage -> setting time to Mon May 4 18:16:12 2009 Mon May 4 18:16:12 UTC 2009 -> configuring network lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Internet Systems Consortium DHCP Client V3.1.2 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ No broadcast interfaces found - exiting. I: copying /etc/hosts from temporary location I: copying /etc/hostname from temporary location Err ftp://ftp.de.debian.org sid Release.gpg Could not resolve 'ftp.de.debian.org' Reading package lists... Done W: Failed to fetch ftp://ftp.de.debian.org/debian/dists/sid/Release.gpg Could not resolve 'ftp.de.debian.org' W: Some index files failed to download, they have been ignored, or old ones used instead. W: You may want to run apt-get update to correct these problems Reading package lists... Done Building dependency tree... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Done Building dependency tree... Done E: Couldn't find package build-essential -> received termination message from inside qemu with exit-code 0, killing child process (qemu:4643) -> successfully killed qemu -> commit change to qemu image forking: qemu-img commit /var/cache/pbuilder/build//qemu.4615.cowdev Image committed. forking: mount -o loop /var/cache/pbuilder/build//qemu.4615.dev /var/cache/pbuilder/build//qemu.4615 -> running post-run process forking: umount /var/cache/pbuilder/build//qemu.4615.dev -> clean up COW device filesKERNEL_IMAGE=/media/extern/freeart/qemubuilder-arm/vmlinuz-2.6.26-1-versatile INITRD=/media/extern/freeart/qemubuilder-arm/initrd.img-2.6.26-1-versatile ARCH=armel #BASEPATH=/media/extern/freeart/qemubuilder-arm/debian_lenny_armel_small.qcow BASEPATH=/media/extern/freeart/qemubuilder-arm/base MEMORY_MEGS=194 OTHERMIRROR="deb http://192.168.178.20/packs ./" BINDMOUNTS="/pbuildersymlink" HOOKDIR="/pbuildersymlink/hooks"
signature.asc
Description: Digital signature
--- End Message ---
--- Begin Message ---On Wed, May 06, 2009 at 12:28:27PM +0900, Junichi Uekawa wrote: > Hi, > > At Mon, 4 May 2009 20:47:11 +0200, > Christoph Egger wrote: > > > > [1 <text/plain; us-ascii (quoted-printable)>] > > On Mon, May 04, 2009 at 08:28:46PM +0200, Christoph Egger wrote: > > > Package: qemubuilder > > > Version: 0.55 > > > Severity: normal > > > > > > Hi! > > > > > > Sorry to bother you again but qemubuilder is just to usefull > > > to ignore ;) > > > > > > I finally managed to find an armel kernel[0] that boots fine > > > here. However, the created qemu environment ends up with non-working > > > network making it impossible to use. --login works fine however but I > > > don't know off-hand how to try setting network there so I haven't done > > > that right now. > > > > > > Regards > > > > > > Christoph > > > > > > [0] http://people.debian.org/~aurel32/qemu/armel/ > > > > Hm thinking about it this is maybee rather an issue with the kernel? > > You probably want a kernel which contains network driver built-in, or > use an initrd. > > My configuration for mipsel is like this (using d-i image some time ago): > > KERNEL_IMAGE=2.6.18-4-mipsel-di-vmlinux > INITRD=2.6.18-4-mipsel-di-initrd.gz > ARCH=mipsel > BASEPATH=/home/dancer/tmp/base-mipsel.qemu > OK this networking thing definitely is a kernel issue. Got networking to run on another kernel (which fails somewhere else but ok). -- /"\ ASCII Ribbon : GPG-Key ID: 0x0372275D \ / Campaign : X against HTML : Debian NM / \ in eMails : http://www.debian.org/ http://www.christoph-egger.org/
Description: Digital signature
--- End Message ---
