Your message dated Tue, 16 Jun 2009 13:17:04 +0000
with message-id <[email protected]>
and subject line Bug#517098: fixed in libpcap 1.0.0-2
has caused the Debian Bug report #517098,
regarding linux-image-2.6.29-2-amd64: breaks tcpdump
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
517098: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=517098
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-image-2.6.29-2-amd64
Version: 2.6.29-4
Severity: important

When I boot the linux-image-2.6.29-2-amd64 kernel (userspace is 32-bit),
I cannot use tcpdump. Old 64-bit kernels work, and the -686 variant of
2.6.29-2 also works. The error displayed by tcpdump (while pinging
192.168.1.1) is:

tcpdump: pcap_loop: corrupted frame on kernel ring mac offset 94 +
caplen 98 > frame len 160


-- Package-specific info:
** Version:
Linux version 2.6.29-2-amd64 (Debian 2.6.29-4) ([email protected]) (gcc
version 4.3.3 (Debian 4.3.3-8) ) #1 SMP Sun May 3 15:03:04 UTC 2009

** Command line:
root=/dev/mapper/aep-root ro nomsi quiet resume=/dev/mapper/aep-swap_1

** Not tainted

** Kernel log:
[   22.136104] iwlagn 0000:0c:00.0: PCI INT A disabled
[   22.136253] wmaster0 (iwlagn): not using net_device_ops yet
[   22.136548] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   22.137647] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1,
caps: 0xa04711/0x202000
[   22.176094] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input10
[   22.363586] uvcvideo: Found UVC 1.00 device OEM Camera (046d:09b2)
[   22.367909] input: OEM Camera as
/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input11
[   22.373848] wlan0 (iwlagn): not using net_device_ops yet
[   22.385150] usbcore: registered new interface driver uvcvideo
[   22.385214] USB Video Class driver (v0.1.0)
[   22.740668] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   22.740740] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
low) -> IRQ 21
[   22.740867] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   24.596246] EXT3 FS on dm-1, internal journal
[   25.077976] loop: module loaded
[   25.137776] tun: Universal TUN/TAP device driver, 1.6
[   25.137837] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[   27.213848] kjournald starting.  Commit interval 5 seconds
[   27.216317] EXT3 FS on dm-3, internal journal
[   27.216414] EXT3-fs: mounted filesystem with ordered data mode.
[   27.250377] Adding 2654200k swap on /dev/mapper/aep-swap_1.
Priority:-1 extents:1 across:2654200k
[   30.049631] Bridge firewalling registered
[   30.068893] device tun0 entered promiscuous mode
[   30.071253] device tun1 entered promiscuous mode
[   30.073516] device tun2 entered promiscuous mode
[   30.075822] device tun3 entered promiscuous mode
[   30.078210] device tun4 entered promiscuous mode
[   30.080688] device tun5 entered promiscuous mode
[   30.083157] device tun6 entered promiscuous mode
[   30.085585] device tun7 entered promiscuous mode
[   30.087710] br0: port 8(tun7) entering learning state
[   30.087768] br0: port 7(tun6) entering learning state
[   30.087824] br0: port 6(tun5) entering learning state
[   30.087880] br0: port 5(tun4) entering learning state
[   30.087937] br0: port 4(tun3) entering learning state
[   30.087993] br0: port 3(tun2) entering learning state
[   30.088070] br0: port 2(tun1) entering learning state
[   30.088133] br0: port 1(tun0) entering learning state
[   30.841115] NET: Registered protocol family 10
[   30.841845] lo: Disabled Privacy Extensions
[   32.723973] vbetool: vm86 mode not supported on 64 bit kernel
[   35.861649] lp0: using parport0 (interrupt-driven).
[   35.872623] ppdev: user-space parallel port driver
[   40.936058] tun0: no IPv6 routers present
[   41.452086] tun6: no IPv6 routers present
[   41.540087] tun5: no IPv6 routers present
[   41.556056] br0: no IPv6 routers present
[   41.576056] tun2: no IPv6 routers present
[   41.668060] tun1: no IPv6 routers present
[   41.688059] tun7: no IPv6 routers present
[   41.836085] tun3: no IPv6 routers present
[   41.836092] tun4: no IPv6 routers present
[   45.085063] br0: topology change detected, propagating
[   45.085153] br0: port 8(tun7) entering forwarding state
[   45.085223] br0: topology change detected, propagating
[   45.085292] br0: port 7(tun6) entering forwarding state
[   45.085361] br0: topology change detected, propagating
[   45.085430] br0: port 6(tun5) entering forwarding state
[   45.085499] br0: topology change detected, propagating
[   45.085568] br0: port 5(tun4) entering forwarding state
[   45.085638] br0: topology change detected, propagating
[   45.085707] br0: port 4(tun3) entering forwarding state
[   45.089065] br0: topology change detected, propagating
[   45.089136] br0: port 3(tun2) entering forwarding state
[   45.089205] br0: topology change detected, propagating
[   45.089274] br0: port 2(tun1) entering forwarding state
[   45.089344] br0: topology change detected, propagating
[   45.089413] br0: port 1(tun0) entering forwarding state
[   45.914041] Bluetooth: Core ver 2.14
[   45.915777] NET: Registered protocol family 31
[   45.915850] Bluetooth: HCI device and connection manager initialized
[   45.915928] Bluetooth: HCI socket layer initialized
[   45.942805] Bluetooth: L2CAP ver 2.11
[   45.942878] Bluetooth: L2CAP socket layer initialized
[   46.136667] Bluetooth: RFCOMM socket layer initialized
[   46.136769] Bluetooth: RFCOMM TTY layer initialized
[   46.136838] Bluetooth: RFCOMM ver 1.10
[   47.029611] iwlagn 0000:0c:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   47.029803] iwlagn 0000:0c:00.0: restoring config space at offset
0x1 (was 0x40100102, writing 0x40100106)
[   47.029914]   alloc irq_desc for 28 on cpu 0 node 0
[   47.029919]   alloc kstat_irqs on cpu 0 node 0
[   47.029942] iwlagn 0000:0c:00.0: irq 28 for MSI/MSI-X
[   47.030033] iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-4965-2.ucode
[   47.169590] iwlagn loaded firmware version 228.57.2.23
[   47.170114] iwlagn: Radio disabled by HW RF Kill switch
[   47.181556] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   47.226721] sky2 eth0: enabling interface
[   47.227568] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   47.310746] iwlagn 0000:0c:00.0: PCI INT A disabled
[   49.640662] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow
control both
[   49.641505] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   53.294582] [drm] Initialized drm 1.1.0 20060810
[   53.348729] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   53.348742] pci 0000:00:02.0: setting latency timer to 64
[   53.380536] pci 0000:00:02.0: irq 28 for MSI/MSI-X
[   53.380614] [drm] Initialized i915 1.6.0 20080730 on minor 0
[   60.168429] eth0: no IPv6 routers present
[  124.452019] eth0: no IPv6 routers present
[  143.289102] device eth0 entered promiscuous mode
[  161.748083] device eth0 left promiscuous mode

** Loaded modules:
Module                  Size  Used by
i915                  148168  2
drm                   168384  3 i915
i2c_algo_bit            5956  1 i915
binfmt_misc             9340  1
rfcomm                 35168  0
l2cap                  19968  5 rfcomm
bluetooth              53892  4 rfcomm,l2cap
kvm_intel              45960  0
kvm                   152848  1 kvm_intel
ppdev                   7528  0
lp                     10324  0
acpi_cpufreq            8376  0
cpufreq_stats           4836  0
cpufreq_powersave       1760  0
cpufreq_conservative     7224  0
cpufreq_userspace       3732  0
ipv6                  284352  26
bridge                 48160  0
stp                     2836  1 bridge
ext2                   62464  1
coretemp                6656  0
tun                    11812  0
firewire_sbp2          15120  0
loop                   15324  0
snd_hda_codec_realtek   243380  1
snd_hda_intel          26488  1
snd_hda_codec          69664  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               7864  1 snd_hda_codec
snd_pcm_oss            36448  0
snd_mixer_oss          14576  1 snd_pcm_oss
snd_pcm                78776  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           3108  0
snd_seq_oss            29232  0
snd_seq_midi            6672  0
snd_rawmidi            22896  1 snd_seq_midi
snd_seq_midi_event      7504  2 snd_seq_oss,snd_seq_midi
arc4                    2016  2
ecb                     3040  2
uvcvideo               55996  0
snd_seq                50912  6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
pcmcia                 27416  0
iwlagn                 80388  0
iwlcore                88064  1 iwlagn
videodev               39664  1 uvcvideo
i2c_i801                9840  0
snd_timer              22272  2 snd_pcm,snd_seq
snd_seq_device          7428  5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
video                  19972  0
rfkill                 11908  2 iwlcore
v4l1_compat            12612  2 uvcvideo,videodev
serio_raw               5780  0
parport_pc             26744  1
parport                37936  3 ppdev,lp,parport_pc
snd                    63224  14
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
yenta_socket           24956  1
rsrc_nonstatic          9952  1 yenta_socket
pcmcia_core            36532  3 pcmcia,yenta_socket,rsrc_nonstatic
v4l2_compat_ioctl32     9168  1 videodev
mac80211              152488  2 iwlagn,iwlcore
output                  3328  1 video
pcspkr                  2768  0
i2c_core               25184  4 i915,drm,i2c_algo_bit,i2c_i801
psmouse                41548  0
evdev                  10496  24
soundcore               7984  1 snd
battery                 7600  0
fujitsu_laptop         13664  0
button                  7280  0
ac                      3760  0
irda                  113716  0
snd_page_alloc          9824  2 snd_hda_intel,snd_pcm
cfg80211               39200  3 iwlagn,iwlcore,mac80211
crc_ccitt               2304  1 irda
ext3                  122816  2
jbd                    50440  1 ext3
mbcache                 9140  2 ext2,ext3
sha256_generic          9408  0
aes_x86_64              8160  2
aes_generic            27808  1 aes_x86_64
cbc                     3744  1
dm_crypt               12984  1
dm_mirror              14456  0
dm_region_hash         12688  1 dm_mirror
dm_log                 10148  2 dm_mirror,dm_region_hash
dm_snapshot            17960  0
dm_mod                 58032  15 dm_crypt,dm_mirror,dm_log,dm_snapshot
sd_mod                 32696  3
ide_cd_mod             30208  0
cdrom                  33592  1 ide_cd_mod
crc_t10dif              2064  1 sd_mod
ata_generic             5876  0
ide_pci_generic         4628  0
ahci                   33696  2
libata                172940  2 ata_generic,ahci
sdhci_pci               7888  0
sdhci                  16932  1 sdhci_pci
firewire_ohci          22020  0
firewire_core          39908  2 firewire_sbp2,firewire_ohci
crc_itu_t               2288  1 firewire_core
scsi_mod              159088  3 firewire_sbp2,sd_mod,libata
piix                    7144  0
ide_core              109060  3 ide_cd_mod,ide_pci_generic,piix
mmc_core               52736  1 sdhci
led_class               4760  2 iwlcore,sdhci
uhci_hcd               22448  0
sky2                   46132  0
ehci_hcd               34124  0
intel_agp              28240  1
thermal                18896  0
processor              45448  4 acpi_cpufreq,thermal
fan                     5304  0
thermal_sys            13104  4 video,thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960
Memory Controller Hub [8086:2a00] (rev 03)
        Subsystem: Fujitsu Limited. Device [10cf:13f2]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03)
(prog-if 00 [VGA controller])
        Subsystem: Fujitsu Limited. Device [10cf:13f7]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 28
        Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=1M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 1800 [size=8]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>

00:02.1 Display controller [0380]: Intel Corporation Mobile
GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03)
        Subsystem: Fujitsu Limited. Device [10cf:13f7]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Fujitsu Limited. Device [10cf:1414]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 22
        Region 4: I/O ports at 1820 [size=32]
        Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Fujitsu Limited. Device [10cf:1414]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 22
        Region 4: I/O ports at 1840 [size=32]
        Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Fujitsu Limited. Device [10cf:1415]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 23
        Region 0: Memory at fc704800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD
Audio Controller [8086:284b] (rev 03)
        Subsystem: Fujitsu Limited. Device [10cf:142d]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at fc700000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=07, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: fc200000-fc2fffff
        Prefetchable memory behind bridge: 000000008c000000-000000008c0fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver

00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0c, subordinate=0f, sec-latency=0
        Memory behind bridge: fc300000-fc3fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR+ <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Fujitsu Limited. Device [10cf:1414]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 22
        Region 4: I/O ports at 1860 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Fujitsu Limited. Device [10cf:1414]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 22
        Region 4: I/O ports at 1880 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Fujitsu Limited. Device [10cf:1414]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 22
        Region 4: I/O ports at 18a0 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Fujitsu Limited. Device [10cf:1415]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 23
        Region 0: Memory at fc704c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=1c, subordinate=20, sec-latency=32
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: fc400000-fc4fffff
        Prefetchable memory behind bridge: 0000000088000000-000000008bffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC
Interface Controller [8086:2815] (rev 03)
        Subsystem: Fujitsu Limited. Device [10cf:140e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM
(ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a
[Master SecP PriP])
        Subsystem: Fujitsu Limited. Device [10cf:140f]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 1810 [size=16]
        Kernel driver in use: PIIX_IDE

00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM
(ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01
[AHCI 1.0])
        Subsystem: Fujitsu Limited. Device [10cf:1411]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 27
        Region 0: I/O ports at 1c00 [size=8]
        Region 1: I/O ports at 18d4 [size=4]
        Region 2: I/O ports at 18d8 [size=8]
        Region 3: I/O ports at 18d0 [size=4]
        Region 4: I/O ports at 18e0 [size=32]
        Region 5: Memory at fc704000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus
Controller [8086:283e] (rev 03)
        Subsystem: Fujitsu Limited. Device [10cf:1413]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 21
        Region 0: Memory at 8c100000 (32-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 1c20 [size=32]
        Kernel driver in use: i801_smbus

04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14)
        Subsystem: Fujitsu Limited. Device [10cf:139a]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 26
        Region 0: Memory at fc200000 (64-bit, non-prefetchable) [size=16K]
        Region 2: I/O ports at 2000 [size=256]
        [virtual] Expansion ROM at 8c000000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: sky2

0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965
AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
        Subsystem: Intel Corporation Device [8086:1101]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at fc300000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: iwlagn

1c:03.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711SP1 Memory CardBus
Controller [1217:7136] (rev 01)
        Subsystem: Fujitsu Limited. Device [10cf:143d]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 168
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fc403000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=1c, secondary=1d, subordinate=20, sec-latency=176
        Memory window 0: 88000000-8bfff000 (prefetchable)
        Memory window 1: 90000000-93fff000
        I/O window 0: 00003000-000030ff
        I/O window 1: 00003400-000034ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus

1c:03.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD
Controller [1217:7120] (rev 02) (prog-if 01)
        Subsystem: Fujitsu Limited. Device [10cf:143d]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fc402800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: sdhci-pci

1c:03.3 Mass storage controller [0180]: O2 Micro, Inc. Integrated
MS/xD Controller [1217:7130] (rev 01)
        Subsystem: Fujitsu Limited. Device [10cf:143d]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at fc400000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

1c:03.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE
1394) [1217:00f7] (rev 02) (prog-if 10 [OHCI])
        Subsystem: Fujitsu Limited. Device [10cf:143e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fc401000 (32-bit, non-prefetchable) [size=4K]
        Region 1: Memory at fc402000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: firewire_ohci



-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (x86_64)

Kernel: Linux 2.6.29-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=ru_RU.CP1251, LC_CTYPE=ru_RU.CP1251 (charmap=CP1251)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.29-2-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.26     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.93.2     tools for generating an initramfs
ii  module-init-tools             3.7-pre9-1 tools for managing Linux kernel mo

linux-image-2.6.29-2-amd64 recommends no packages.

Versions of packages linux-image-2.6.29-2-amd64 suggests:
ii  grub                          0.97-53    GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.29              <none>     (no description available)

-- debconf information:
  linux-image-2.6.29-2-amd64/preinst/abort-install-2.6.29-2-amd64:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.29-2-amd64/postinst/old-initrd-link-2.6.29-2-amd64: true
  linux-image-2.6.29-2-amd64/preinst/failed-to-move-modules-2.6.29-2-amd64:
  linux-image-2.6.29-2-amd64/postinst/old-system-map-link-2.6.29-2-amd64: true
  linux-image-2.6.29-2-amd64/preinst/elilo-initrd-2.6.29-2-amd64: true
  linux-image-2.6.29-2-amd64/prerm/would-invalidate-boot-loader-2.6.29-2-amd64:
true
  linux-image-2.6.29-2-amd64/postinst/create-kimage-link-2.6.29-2-amd64: true
  linux-image-2.6.29-2-amd64/prerm/removing-running-kernel-2.6.29-2-amd64: true
  linux-image-2.6.29-2-amd64/postinst/old-dir-initrd-link-2.6.29-2-amd64: true
  linux-image-2.6.29-2-amd64/preinst/lilo-has-ramdisk:
  linux-image-2.6.29-2-amd64/postinst/kimage-is-a-directory:
  linux-image-2.6.29-2-amd64/preinst/initrd-2.6.29-2-amd64:
  linux-image-2.6.29-2-amd64/postinst/depmod-error-2.6.29-2-amd64: false
  linux-image-2.6.29-2-amd64/preinst/abort-overwrite-2.6.29-2-amd64:
  linux-image-2.6.29-2-amd64/postinst/bootloader-test-error-2.6.29-2-amd64:
  linux-image-2.6.29-2-amd64/preinst/lilo-initrd-2.6.29-2-amd64: true
  linux-image-2.6.29-2-amd64/preinst/bootloader-initrd-2.6.29-2-amd64: true
  linux-image-2.6.29-2-amd64/preinst/overwriting-modules-2.6.29-2-amd64: true
  linux-image-2.6.29-2-amd64/postinst/depmod-error-initrd-2.6.29-2-amd64: false
  linux-image-2.6.29-2-amd64/postinst/bootloader-error-2.6.29-2-amd64:


-- 
Alexander E. Patrakov



--- End Message ---
--- Begin Message ---
Source: libpcap
Source-Version: 1.0.0-2

We believe that the bug you reported is fixed in the latest version of
libpcap, which is due to be installed in the Debian FTP archive:

libpcap-dev_1.0.0-2_all.deb
  to pool/main/libp/libpcap/libpcap-dev_1.0.0-2_all.deb
libpcap0.8-dbg_1.0.0-2_amd64.deb
  to pool/main/libp/libpcap/libpcap0.8-dbg_1.0.0-2_amd64.deb
libpcap0.8-dev_1.0.0-2_amd64.deb
  to pool/main/libp/libpcap/libpcap0.8-dev_1.0.0-2_amd64.deb
libpcap0.8_1.0.0-2_amd64.deb
  to pool/main/libp/libpcap/libpcap0.8_1.0.0-2_amd64.deb
libpcap_1.0.0-2.diff.gz
  to pool/main/libp/libpcap/libpcap_1.0.0-2.diff.gz
libpcap_1.0.0-2.dsc
  to pool/main/libp/libpcap/libpcap_1.0.0-2.dsc



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Romain Francoise <[email protected]> (supplier of updated libpcap package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Tue, 16 Jun 2009 14:59:24 +0200
Source: libpcap
Binary: libpcap-dev libpcap0.8-dev libpcap0.8 libpcap0.8-dbg
Architecture: source all amd64
Version: 1.0.0-2
Distribution: unstable
Urgency: low
Maintainer: Romain Francoise <[email protected]>
Changed-By: Romain Francoise <[email protected]>
Description: 
 libpcap-dev - development library for libpcap (transitional package)
 libpcap0.8 - system interface for user-level packet capture
 libpcap0.8-dbg - debugging symbols for libpcap0.8
 libpcap0.8-dev - development library and header files for libpcap0.8
Closes: 516089 517098
Changes: 
 libpcap (1.0.0-2) unstable; urgency=low
 .
   * debian/rules: Move pcap-filter(7) man page to libpcap0.8 from
     libpcap0.8-dev (see #527599).
   * debian/control:
     + Make libpcap0.8 replace libpcap0.8-dev (<< 1.0.0-2) for the
       aforementioned change.
     + Add explicit build-depends on linux-libc-dev (>= 2.6.27) on i386 to
       make sure that tpacket_v2 support gets compiled in (closes: #517098).
     + Move libpcap0.8-dbg to 'debug' to follow override.
     + Set Standards-Version to 3.8.1.
   * debian/patches/20-fix-rename-usbmon.diff: New patch cherry-picked from
     upstream; renames USB capture pseudo-interfaces to 'usbmonN' to avoid
     collision with 'usbN' USB network cards (closes: #516089).
Checksums-Sha1: 
 f9454b25fbd1e15848fa2a38a0d0646469c7adde 1241 libpcap_1.0.0-2.dsc
 b51f44ab0a0b702fbd000a49b660b45dc5b73e76 14046 libpcap_1.0.0-2.diff.gz
 72c7faa16cee4e75e9434c3ee59f180dc19d4704 17664 libpcap-dev_1.0.0-2_all.deb
 1c565f9b843bef611f11029bbfd52637b0179fa5 217484 
libpcap0.8-dev_1.0.0-2_amd64.deb
 d2f4809c03fa257b807b0e486e987f302b9700a8 122842 libpcap0.8_1.0.0-2_amd64.deb
 6cb7f9a3abe3673eb72e3c97ab5734ef857b60db 126876 
libpcap0.8-dbg_1.0.0-2_amd64.deb
Checksums-Sha256: 
 15d308bf5137d090ba9b2a2c9d4b542bf16c6ab5daa07b818ae61adb6fbbf2d6 1241 
libpcap_1.0.0-2.dsc
 429713ed64b36b7679d952986adaf9f80529f4fa549fbf6c37a1b18e5beaa2e2 14046 
libpcap_1.0.0-2.diff.gz
 7356d96a96700b2d70d3da7388868085d61b7cfc7839d86d3473eed9bd96adef 17664 
libpcap-dev_1.0.0-2_all.deb
 1a71860ca0e51b39e32fb719738e4de591dfab98fb0d5a6b79361500d37db7e0 217484 
libpcap0.8-dev_1.0.0-2_amd64.deb
 c309262e6bdfc2a49fd924c953be1982f25800b84fc3fe43987393e7df22a9a0 122842 
libpcap0.8_1.0.0-2_amd64.deb
 33af2fc394acc0d8e5f28c3ca0e6268315177a18f699146715ece62df8781052 126876 
libpcap0.8-dbg_1.0.0-2_amd64.deb
Files: 
 ab06f49afc101a93e5076aca63997773 1241 devel optional libpcap_1.0.0-2.dsc
 60e835af35d190f83bc8ced78f831ab6 14046 devel optional libpcap_1.0.0-2.diff.gz
 8d6d06222794f80db39f90ad2d71e0bd 17664 libdevel optional 
libpcap-dev_1.0.0-2_all.deb
 2d1966da6bd58364ef55e42ea9614633 217484 libdevel optional 
libpcap0.8-dev_1.0.0-2_amd64.deb
 3631f3a4b950e6ac9d184045927f1a5d 122842 libs optional 
libpcap0.8_1.0.0-2_amd64.deb
 b6f95d9fdef7c675651bfcbc01d97962 126876 debug extra 
libpcap0.8-dbg_1.0.0-2_amd64.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iD8DBQFKN5k2ogN2vsA8Vt8RAtONAKCUj6fe+P5dSp8KtiXXSiDlUrAxIgCgrYPl
5VdpNcC1xeNuJLSYl54sY60=
=eRBq
-----END PGP SIGNATURE-----



--- End Message ---

Reply via email to