Your message dated Wed, 9 Jun 2010 19:33:55 +0200
with message-id <[email protected]>
and subject line Re: Bug#585144: Partitioning ext3 and ext4
has caused the Debian Bug report #585144,
regarding Partitioning ext3 and ext4
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
585144: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=585144
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: Debian Squeeze
Version: sheevaplug latest
I followed the install guide to setup Debian Squeeze on a sheevaplug.
When I try to create an ext3 or ext4 the procedure will fail. Ext2
does work!
Here's the transcript:
┌───────────────────────┤ [!!] Partition disks ├───────────────────────┐
│ │
│ If you continue, the changes listed below will be written to the │
│ disks. Otherwise, you will be able to make further changes manually. │
│ │
│ WARNING: This will destroy all data on any partitions you have │
│ removed as well as on the partitions that are going to be formatted. │
│ │
│ The partition tables of the following devices are changed: │
│ MMC/SD card #1 (mmcblk0) │
│ │
│ The following partitions are going to be formatted: │
│ partition #2 of MMC/SD card #1 (mmcblk0) as ext4 │
│ partition #1 of SCSI1 (0,0,0) (sda) as ext4 │
│ │
│ Write the changes to disks? │
│ │
│ <Yes> <No> │
│ │
└──────────────────────────────────────────────────────────────────────┘
┌─────────────────────┤ [!!] Partition disks ├─────────────────────┐
│ │
│ Failed to create a file system │
│ The ext4 file system creation in partition #2 of MMC/SD card #1 │
│ (mmcblk0) failed. │
│ │
│ <Go Back> <Continue> │
│ │
└──────────────────────────────────────────────────────────────────┘
I am using the packages from
http://www.cyrius.com/debian/kirkwood/sheevaplug/install.html and the
latest uboot from
http://www.cyrius.com/debian/kirkwood/sheevaplug/uboot-upgrade.html
All software is downloaded today.
--- End Message ---
--- Begin Message ---
Closing (duplicate bug).
--
Martin Michlmayr
http://www.cyrius.com/
--- End Message ---
