--- Begin Message ---
Package: fglrx-source
Version: 1:10-9-3
Severity: wishlist
Tags: patch
there is 2.6.36-rc in experimental. support would be nice
-- Package-specific info:
VGA-compatible devices on PCI bus:
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3200 Graphics
02:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3470
DRM and fglrx Informations from dmesg:
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.337320] PCI-DMA: Disabling AGP.
[ 0.337519] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.341659] Linux agpgart interface v0.103
[ 6.377609] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[ 6.377643] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[ 6.440811] [fglrx] Maximum main memory to use for locked dma buffers: 3557
MBytes.
[ 6.440886] [fglrx] vendor: 1002 device: 9610 count: 1
[ 6.441003] [fglrx] vendor: 1002 device: 95c0 count: 2
[ 6.441271] [fglrx] ioport: bar 1, base 0xd000, size: 0x100
[ 6.441504] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 6.441787] [fglrx] Kernel PAT support is enabled
[ 6.441848] [fglrx] module loaded - fglrx 8.77.5 [Aug 25 2010] with 2 minors
[ 35.658929] [fglrx] Firegl kernel thread PID: 1616
[ 35.659186] [fglrx] IRQ 43 Enabled
[ 35.751784] [fglrx] Could not enable MSI; System prevented initialization
[ 35.752273] [fglrx] Firegl kernel thread PID: 1617
[ 35.752559] [fglrx] IRQ 18 Enabled
[ 39.831599] [fglrx] Gart USWC size:1094 M.
[ 39.831603] [fglrx] Gart cacheable size:460 M.
[ 39.831606] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 39.831608] [fglrx] Reserved FB block: Unshared offset:fbfa000, size:402000
[ 39.831610] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 861 Jun 20 12:57 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "OffTime" "5"
Option "SuspendTime" "5"
Option "StandbyTime" "5"
Option "Xinerama" "off"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 25532 Sep 30 20:48 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.21-dsa-amd64 x86_64 Debian
Current Operating System: Linux balihb2 2.6.36-rc5 #1 SMP Mon Sep 27 21:30:27
CEST 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-rc5 root=/dev/sda1 ro
rootfstype=ext4
Build Date: 20 September 2010 06:14:18PM
xorg-server 2:1.7.7-7 (Julien Cristau <[email protected]>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 30 20:48:10 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]-0"
(**) | |-->Device "aticonfig-Device[0]-0"
(**) Option "StandbyTime" "5"
(**) Option "SuspendTime" "5"
(**) Option "OffTime" "5"
(**) Option "Xinerama" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
(II) Loader magic: 0x7c5480
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI: (0:1:5:0) 1002:9610:1043:82f1 ATI Technologies Inc Radeon HD 3200
Graphics rev 0, Mem @ 0xc0000000/268435456, 0xfe9f0000/65536,
0xfe800000/1048576, I/O @ 0x0000d000/256
(--) PCI:*(0:2:0:0) 1002:95c0:174b:e390 ATI Technologies Inc Mobility Radeon HD
3470 rev 0, Mem @ 0xd0000000/268435456, 0xfeaf0000/65536, I/O @ 0x0000e000/256,
BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.77.5
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.77.5
(II) ATI Proprietary Linux Driver Version Identifier:8.77.5
(II) ATI Proprietary Linux Driver Release Identifier: 8.771
(II) ATI Proprietary Linux Driver Build Date: Aug 25 2010 21:38:26
(II) Primary Device is: PCI 0...@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@1:5:0) found
(--) Chipset Supported AMD Graphics Processor (0x95C0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:17:0)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:18:0)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:18:1)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:18:2)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:19:0)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:19:1)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:19:2)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:0)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:1)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:2)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:3)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:4)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:5)
found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@1:5:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@2:0:1) found
(**) ChipID override: 0x9610
(**) Chipset Supported AMD Graphics Processor (0x9610) found
(II) AMD Video driver is running on a device belonging to a group targeted for
this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0xbc2a10
(II) pEnt->device->identifier=(nil)
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 12, (OK)
ukiOpenByBusid: ukiOpenMinor returns 12
ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
ukiOpenDevice: node name is /dev/ati/card1
ukiOpenDevice: open result is 12, (OK)
ukiOpenByBusid: ukiOpenMinor returns 12
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:1:5:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 13, (OK)
ukiOpenByBusid: ukiOpenMinor returns 13
ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
(==) fglrx(0): NoAccel = NO
(**) fglrx(0): ATI 2D Acceleration Architecture disabled, using XAA
(--) fglrx(0): Chipset: "ATI Radeon HD 3470" (Chipset = 0x95c0)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe390)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original
ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfeaf0000
(--) fglrx(0): I/O port at 0x0000e000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.84
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV620
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x82f1)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original
ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xfe9f0000
(--) fglrx(0): I/O port at 0x0000d000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 2:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(II) fglrx(0): Interrupt handler installed at IRQ 43.
(II) fglrx(0): Using adapter: 1:5.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(II) fglrx(0): Interrupt handler installed at IRQ 18.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) fglrx(0): Active stereo disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(WW) fglrx(0): Unable to register ADL handler for 0x00C00000
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output CV has no monitor section
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: DFP1
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM Model: 43f Serial#: 1297691188
(II) fglrx(0): Year: 2008 Week: 50
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 52 vert.: 32
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 640x...@60hz
(II) fglrx(0): 800x...@56hz
(II) fglrx(0): 800x...@60hz
(II) fglrx(0): 1024x...@60hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 154.0 MHz Image Size: 518 x 324 mm
(II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080
h_border: 0
(II) fglrx(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235
v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz,
PixClock max 175 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: H9XQC02826
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004c2d3f043432594d
(II) fglrx(0): 32120103803420782aee91a3544c9926
(II) fglrx(0): 0f5054230800a9408180814001010101
(II) fglrx(0): 010101010101283c80a070b023403020
(II) fglrx(0): 360006442100001a000000fd00383c1e
(II) fglrx(0): 5111000a202020202020000000fc0053
(II) fglrx(0): 796e634d61737465720a2020000000ff
(II) fglrx(0): 00483958514330323832360a20200098
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): EDID vendor "SAM", prod id 1087
(II) fglrx(0): Using EDID range info for horizontal sync
(II) fglrx(0): Using EDID range info for vertical refresh
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203
1209 1235 +hsync -vsync (74.0 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201
1204 1250 +hsync +vsync (75.0 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Output DFP1 connected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output CV disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output DFP1 using initial mode 1920x1200
(II) fglrx(0): Display dimensions: (520, 320) mm
(II) fglrx(0): DPI set to (93, 95)
(II) fglrx(0): Adapter ATI Radeon HD 3470 has 2 configurable heads and 1
displays connected.
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 18, (OK)
ukiOpenByBusid: ukiOpenMinor returns 18
ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
ukiOpenDevice: node name is /dev/ati/card1
ukiOpenDevice: open result is 18, (OK)
ukiOpenByBusid: ukiOpenMinor returns 18
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f483a6cf000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.77.5
(II) fglrx(0): Date: Aug 25 2010
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.36-rc5
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): The CrossFire ribbon connector is not connected properly,
attempting software CrossFire
(II) fglrx(0): Enable CrossFire successfully!
(II) fglrx(0): DRI initialization successfull
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x0101d000
(II) fglrx(0): FBMM initialized for area (0,0)-(1920,2200)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer -
assumption)
(II) fglrx(0): Largest offscreen area available: 1920 x 280
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
(II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position
after horizontal size changed.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 19, (OK)
ukiOpenByBusid: ukiOpenMinor returns 19
ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
ukiOpenDevice: node name is /dev/ati/card1
ukiOpenDevice: open result is 19, (OK)
ukiOpenByBusid: ukiOpenMinor returns 19
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
(II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Enable the clock gating for slave!
(II) fglrx(0): Setting screen physical size to 508 x 317
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "hu"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "hu"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
(**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found relative axes
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(II) Logitech USB Receiver: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
(**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event5"
(II) Logitech USB Receiver: Found 1 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found relative axes
(II) Logitech USB Receiver: Found absolute axes
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "hu"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) Logitech USB Receiver: failed to initialize for relative axes.
(II) Logitech USB Receiver: initialized for absolute axes.
(II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "hu"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2
capable environments
-- System Information:
Debian Release: squeeze/sid
APT prefers testing-proposed-updates
APT policy: (500, 'testing-proposed-updates'), (500, 'unstable'), (500,
'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.36-rc5 (SMP w/2 CPU cores)
Locale: LANG=hu_HU.UTF-8, LC_CTYPE=hu_HU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages fglrx-source depends on:
ii bzip2 1.0.5-6 high-quality block-sorting file co
ii debhelper 8.0.0 helper programs for debian/rules
ii make 3.81-8 An utility for Directing compilati
Versions of packages fglrx-source recommends:
ii kernel-package 12.036 A utility for building Linux kerne
ii module-assistant 0.11.3 tool to make module package creati
Versions of packages fglrx-source suggests:
ii fglrx-driver 1:10-9-3 non-free AMD/ATI r6xx - r7xx displ
-- no debconf information
--- work.orig/common/lib/modules/fglrx/build_mod/firegl_public.c 2010-08-20 21:51:48.000000000 +0200
+++ work/common/lib/modules/fglrx/build_mod/firegl_public.c 2010-08-20 23:46:37.000000000 +0200
@@ -320,7 +320,11 @@
return firegl_release((KCL_IO_FILE_Handle)filp);
}
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)
+int ip_firegl_ioctl(struct file* filp, unsigned int cmd, unsigned long arg)
+#else
int ip_firegl_ioctl(struct inode* inode, struct file* filp, unsigned int cmd, unsigned long arg)
+#endif
{
return firegl_ioctl((KCL_IO_FILE_Handle)filp, cmd, arg);
}
@@ -407,7 +411,11 @@
#endif
open: ip_firegl_open,
release: ip_firegl_release,
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)
+ unlocked_ioctl: ip_firegl_ioctl,
+#else
ioctl: ip_firegl_ioctl,
+#endif
mmap: ip_firegl_mmap,
write: ip_firegl_write,--- 10.9/common/lib/modules/fglrx/build_mod/kcl_ioctl.c 2010-09-01 10:05:31.000000000 -0400
+++ 10.9/common/lib/modules/fglrx/build_mod/kcl_ioctl.c 2010-09-16 23:11:12.066336002 -0400
@@ -193,7 +193,7 @@
*/
void* ATI_API_CALL KCL_IOCTL_AllocUserSpace32(long size)
{
- return compat_alloc_user_space(size);
+ return arch_compat_alloc_user_space(size);
}
#endif // __x86_64__
--- End Message ---
