Your message dated Sun, 20 Mar 2011 22:58:28 +0000
with message-id <[email protected]>
and subject line Bug#570892: fixed in smartmontools 5.40+svn3296-1
has caused the Debian Bug report #570892,
regarding smartmontools: smartctl does not warn about SMART Attribute Autosave
disabled (with -a option)
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
570892: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=570892
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: smartmontools
Version: 5.39.1+svn3060-1
Severity: minor
In manual of smartctl: If the GLTSD bit is set then ´smartctl -a´ will issue
a warning.
But if SMART attribute autosave if disabled for SATA drive, no any warning
issued in -a or -x output.
Steps to reproduce:
smartctl -S on /dev/sda
smartctl -a /dev/sda >1
smartctl -S off /dv/sda
smartctl -a /dev/hsda >2
diff 1 2
13c13
< Local Time is: Mon Feb 22 07:03:12 2010 MSK
---
> Local Time is: Mon Feb 22 07:03:21 2010 MSK
====== begin of -x output ====
Data about drive:
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K80 series
Device Model: HDS728080PLA380
Serial Number: PFDB32E8U1NLYM
Firmware Version: PF2OA6EA
User Capacity: 82Â 348Â 277Â 760 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
Local Time is: Mon Feb 22 07:11:57 2010 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 36) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: (1828) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 31) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always
- 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline
- 0
3 Spin_Up_Time 0x0007 105 105 024 Pre-fail Always
- 195 (Average 184)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always
- 92
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline
- 0
9 Power_On_Hours 0x0012 099 099 000 Old_age Always
- 9386
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 92
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always
- 445
193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always
- 445
194 Temperature_Celsius 0x0002 137 137 000 Old_age Always
- 40 (Lifetime Min/Max 17/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always
- 0
General Purpose Logging (GPL) feature set supported
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error]
GP Log at address 0x20 has 1 sectors [Streaming performance log]
GP Log at address 0x21 has 1 sectors [Write stream error log]
GP Log at address 0x22 has 1 sectors [Read stream error log]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 5 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 [0] occurred at disk power-on lifetime: 9385 hours (391 days + 1 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 c2 4f 09 00 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d6 00 01 00 00 00 c2 4f 09 00 08 21d+07:57:29.200 SMART WRITE LOG
b0 00 d5 00 01 00 00 00 c2 4f 09 00 08 21d+07:57:29.100 SMART READ LOG
b0 00 d1 00 01 00 00 00 c2 4f 01 00 08 21d+07:57:29.000 SMART READ ATTRIBUTE
THRESHOLDS [OBS-4]
b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 21d+07:57:29.000 SMART READ DATA
b0 00 da 00 00 00 00 00 c2 4f 00 00 08 21d+07:57:28.900 SMART RETURN STATUS
Error 4 [3] occurred at disk power-on lifetime: 9385 hours (391 days + 1 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 c2 4f 09 00 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d6 00 01 00 00 00 c2 4f 09 00 08 21d+07:43:58.200 SMART WRITE LOG
b0 00 d5 00 01 00 00 00 c2 4f 09 00 08 21d+07:43:58.100 SMART READ LOG
b0 00 d1 00 01 00 00 00 c2 4f 01 00 08 21d+07:43:58.000 SMART READ ATTRIBUTE
THRESHOLDS [OBS-4]
b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 21d+07:43:57.900 SMART READ DATA
b0 00 da 00 00 00 00 00 c2 4f 00 00 08 21d+07:43:57.900 SMART RETURN STATUS
Error 3 [2] occurred at disk power-on lifetime: 9385 hours (391 days + 1 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 c2 4f 09 00 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d6 00 01 00 00 00 c2 4f 09 00 08 21d+07:43:54.100 SMART WRITE LOG
b0 00 d5 00 01 00 00 00 c2 4f 09 00 08 21d+07:43:54.000 SMART READ LOG
61 00 08 00 00 00 00 00 7a f6 8e 40 08 21d+07:43:54.000 WRITE FPDMA QUEUED
b0 00 d1 00 01 00 00 00 c2 4f 01 00 08 21d+07:43:53.900 SMART READ ATTRIBUTE
THRESHOLDS [OBS-4]
61 00 30 00 00 00 00 00 7a f6 5e 40 08 21d+07:43:53.900 WRITE FPDMA QUEUED
Error 2 [1] occurred at disk power-on lifetime: 9385 hours (391 days + 1 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 c2 4f 09 00 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d6 00 01 00 00 00 c2 4f 09 00 08 21d+07:43:47.800 SMART WRITE LOG
b0 00 d5 00 01 00 00 00 c2 4f 09 00 08 21d+07:43:47.700 SMART READ LOG
b0 00 d1 00 01 00 00 00 c2 4f 01 00 08 21d+07:43:47.600 SMART READ ATTRIBUTE
THRESHOLDS [OBS-4]
b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 21d+07:43:47.500 SMART READ DATA
b0 00 da 00 00 00 00 00 c2 4f 00 00 08 21d+07:43:47.400 SMART RETURN STATUS
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short captive Interrupted (host reset) 40% 9386 -
# 2 Short captive Interrupted (host reset) 40% 9385 -
# 3 Extended offline Completed without error 00% 9384 -
# 4 Extended offline Completed without error 00% 8599 -
# 5 Extended offline Completed without error 00% 8512 -
# 6 Extended offline Completed without error 00% 3269 -
# 7 Extended offline Completed without error 00% 2885 -
# 8 Extended offline Completed without error 00% 2883 -
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Warning: device does not support SCT Commands
SATA Phy Event Counters (GP Log 0x11) not supported
==== end of -x output =====
-- Package-specific info:
Output of /usr/share/bug/smartmontools:
# CONFIG_IDE_TASK_IOCTL is not set
-- System Information:
Debian Release: 5.0.4
APT prefers stable
APT policy: (990, 'stable'), (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages smartmontools depends on:
ii debianutils 2.30 Miscellaneous utilities specific t
ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib
ii libcap-ng0 0.6.2-4+b1 An alternate posix capabilities li
ii libgcc1 1:4.4.3-2 GCC support library
ii libselinux1 2.0.89-4 SELinux runtime shared libraries
ii libstdc++6 4.4.3-2 The GNU Standard C++ Library v3
ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip
Versions of packages smartmontools recommends:
ii mailutils [mailx] 1:1.2+dfsg1-4 GNU mailutils utilities for handli
Versions of packages smartmontools suggests:
pn gsmartcontrol <none> (no description available)
pn powersaved <none> (no description available)
ii smart-notifier 0.28-1.1 graphical hard disk health status
-- debconf-show failed
--- End Message ---
--- Begin Message ---
Source: smartmontools
Source-Version: 5.40+svn3296-1
We believe that the bug you reported is fixed in the latest version of
smartmontools, which is due to be installed in the Debian FTP archive:
smartmontools_5.40+svn3296-1.debian.tar.gz
to main/s/smartmontools/smartmontools_5.40+svn3296-1.debian.tar.gz
smartmontools_5.40+svn3296-1.dsc
to main/s/smartmontools/smartmontools_5.40+svn3296-1.dsc
smartmontools_5.40+svn3296-1_i386.deb
to main/s/smartmontools/smartmontools_5.40+svn3296-1_i386.deb
smartmontools_5.40+svn3296.orig.tar.gz
to main/s/smartmontools/smartmontools_5.40+svn3296.orig.tar.gz
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Giuseppe Iuculano <[email protected]> (supplier of updated smartmontools
package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Sun, 20 Mar 2011 19:09:39 +0100
Source: smartmontools
Binary: smartmontools
Architecture: source i386
Version: 5.40+svn3296-1
Distribution: unstable
Urgency: low
Maintainer: Giuseppe Iuculano <[email protected]>
Changed-By: Giuseppe Iuculano <[email protected]>
Description:
smartmontools - control and monitor storage systems using S.M.A.R.T.
Closes: 435579 552044 570892 581996 593502 601258 607689
Changes:
smartmontools (5.40+svn3296-1) unstable; urgency=low
.
* [cfbba5b] Imported Upstream version 5.40+svn3296
- Intel X18-M/X25-M/X25-V G2 SSDs: Add firmware bug warning
(Closes: #581996)
- handles missing attributes and prints attributes of SandForce based SSDs
correctly (Closes: #601258)
- Added a note about smartctl is unable to print a warning if autosave is
disabled (Closes: 570892)
- Print help message if no option is specified (Closes: 435579)
- Only some of the controller specific parts of the code may still use the
old ioctl (LP: #658469)
- New drive database entry for F4EG (LP: #684809)
* [b5b85ba] Refreshed patches
* [2b7f0f1] Update to Standards-Version 3.9.1, no changes needed
* [3ed7206] debian/rules: remove make -C examplescripts
* [f8250f3] Pass exampledir in configure
* [0711e68] Install examples files and update-smart-drivedb (Closes: #607689)
(Closes: #593502)
* [f36e375] Do not install CHANGELOG COPYING INSTALL and initd files
* [a76819a] Re-enabled capability-dropping on armel (Closes: #552044)
Checksums-Sha1:
319f7425f1243cecc854ac00a08b95dad05193a8 1562 smartmontools_5.40+svn3296-1.dsc
be225a09f044eb426c3099c8d6200c94310a48e6 635414
smartmontools_5.40+svn3296.orig.tar.gz
e746f3446562b74852a2e23c450996df931bef3f 38877
smartmontools_5.40+svn3296-1.debian.tar.gz
75af22951ef7b03c29604326d20457660fee6e2f 487718
smartmontools_5.40+svn3296-1_i386.deb
Checksums-Sha256:
15224443bfb4a8c5281aa22ce8b460b73a5c4d90c4206ee8b09969519c88d51c 1562
smartmontools_5.40+svn3296-1.dsc
23110996d0a19c8d4744637b1ecfc178ee589f37b3b1b8338ab0453afe0e2ad3 635414
smartmontools_5.40+svn3296.orig.tar.gz
f824805a22f38638814679cc32aab6d50c81d4e4faf16a59ea4b21423ea45359 38877
smartmontools_5.40+svn3296-1.debian.tar.gz
b2ad0d887de9dc0d873fd9f8cca26c2d6b52efadc2f75d8622667af390f58dc4 487718
smartmontools_5.40+svn3296-1_i386.deb
Files:
020107ea231006640b3c0a1b4bbfa460 1562 utils optional
smartmontools_5.40+svn3296-1.dsc
90cd32f9478b715fd72cff7df3f79e1a 635414 utils optional
smartmontools_5.40+svn3296.orig.tar.gz
5c2470bc11501619f94eac947d61d64d 38877 utils optional
smartmontools_5.40+svn3296-1.debian.tar.gz
430924fa0d86c670e3d55b44816cbb6c 487718 utils optional
smartmontools_5.40+svn3296-1_i386.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEARECAAYFAk2GRlIACgkQNxpp46476apKJQCfaFuEyCoFB5b/ouvK3DDERmTq
bXcAn10Vq9+FZGlwisdrxAJzrsJnIzM/
=/+cR
-----END PGP SIGNATURE-----
--- End Message ---
