Your message dated Sun, 20 Mar 2011 22:58:28 +0000
with message-id <[email protected]>
and subject line Bug#601258: fixed in smartmontools 5.40+svn3296-1
has caused the Debian Bug report #601258,
regarding smartmontools: SandForce SSD errors
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
601258: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601258
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: smartmontools
Version: 5.39.1+svn3124-1
Severity: normal
I get errors on smartctl execution:
smartctl -a /dev/sda
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: OCZ Vertex SSD
Device Model: OCZ-VERTEX2
Serial Number: ....
Firmware Version: 1.11
User Capacity: 60.022.480.896 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Sun Oct 24 19:42:05 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f --- --- --- Pre-fail Always
- 4666526360432
5 Reallocated_Sector_Ct 0x0033 094 094 003 Pre-fail Always
- 576
9 Power_On_Hours 0x0032 --- --- --- Old_age Always
- 8846195568072221796
12 Power_Cycle_Count 0x0032 --- --- --- Old_age Always
- 4875364
171 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
172 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline
- 4
177 Wear_Leveling_Count 0x0000 000 000 --- Old_age Offline
- 0
177 Wear_Leveling_Count <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
181 Program_Fail_Cnt_Total <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
181 Program_Fail_Cnt_Total 0x0000 000 000 --- Old_age Offline
- 0
181 Program_Fail_Cnt_Total <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
182 Erase_Fail_Count_Total <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
182 Erase_Fail_Count_Total 0x0000 000 000 --- Old_age Offline
- 0
182 Erase_Fail_Count_Total <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
187 Reported_Uncorrect <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always
- 0
187 Reported_Uncorrect <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
194 Temperature_Celsius <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
194 Temperature_Celsius 0x0022 000 000 --- Old_age Always
- 0
194 Temperature_Celsius <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
195 Program_Failure_Blk_Ct <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
195 Program_Failure_Blk_Ct 0x001c --- --- --- Old_age Offline
- 4666526360432
196 Erase_Failure_Blk_Ct 0x0033 --- --- --- Pre-fail Always
- 25700
231 Temperature_Celsius 0x0013 090 090 --- Pre-fail Always
- 1
231 Temperature_Celsius <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
233 Media_Wearout_Indicator <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
233 Media_Wearout_Indicator 0x0000 000 000 --- Old_age Offline
- 64
233 Media_Wearout_Indicator <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
234 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
234 Unknown_Attribute 0x0000 000 000 --- Old_age Offline
- 128
234 Unknown_Attribute <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
241 Total_LBAs_Written <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
241 Total_LBAs_Written 0x0032 000 000 --- Old_age Always
- 128
241 Total_LBAs_Written <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
242 Total_LBAs_Read <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
242 Total_LBAs_Read 0x0032 000 000 --- Old_age Always
- 576
Error SMART Error Log Read failed: Eingabe-/Ausgabefehler
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: Eingabe-/Ausgabefehler
Smartctl: SMART Self Test Log Read Failed
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
It seems that SandForce SSDs aren't well supported in smartmontools 5.39.1.
The smart data attributes aren't correct. ID 5 for example is the retired
block count.
The correct values are listed here:
http://www.ocztechnologyforum.com/forum/showthread.php?75786-SMART-Attributes-
for-Sandforce-SSD-s-%28Agility2-Vertex2-VertexLE%29
Upstream the attributes were corrected:
http://sourceforge.net/apps/trac/smartmontools/wiki
> 2010-08-20: We added support for SSDs with SandForce controller. Only a few
drive models are detected for now. If you have a drive not detected, please
report this to our drive database mailinglist.
An up-to-date drivedb file would fix the wrong attribute names.
Furthermore a new smartmontools version (5.40) with SandForce support is
available:
*
http://sourceforge.net/apps/trac/smartmontools/browser/tags/RELEASE_5_40/smartmontools/NEWS
*
http://sourceforge.net/apps/trac/smartmontools/query?group=status&milestone=Release+5.40
It would be nice if you could provide support for SandForce SSD (e. g. OCZ
Vertex 2 series).
Thank you.
--- End Message ---
--- Begin Message ---
Source: smartmontools
Source-Version: 5.40+svn3296-1
We believe that the bug you reported is fixed in the latest version of
smartmontools, which is due to be installed in the Debian FTP archive:
smartmontools_5.40+svn3296-1.debian.tar.gz
to main/s/smartmontools/smartmontools_5.40+svn3296-1.debian.tar.gz
smartmontools_5.40+svn3296-1.dsc
to main/s/smartmontools/smartmontools_5.40+svn3296-1.dsc
smartmontools_5.40+svn3296-1_i386.deb
to main/s/smartmontools/smartmontools_5.40+svn3296-1_i386.deb
smartmontools_5.40+svn3296.orig.tar.gz
to main/s/smartmontools/smartmontools_5.40+svn3296.orig.tar.gz
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Giuseppe Iuculano <[email protected]> (supplier of updated smartmontools
package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Sun, 20 Mar 2011 19:09:39 +0100
Source: smartmontools
Binary: smartmontools
Architecture: source i386
Version: 5.40+svn3296-1
Distribution: unstable
Urgency: low
Maintainer: Giuseppe Iuculano <[email protected]>
Changed-By: Giuseppe Iuculano <[email protected]>
Description:
smartmontools - control and monitor storage systems using S.M.A.R.T.
Closes: 435579 552044 570892 581996 593502 601258 607689
Changes:
smartmontools (5.40+svn3296-1) unstable; urgency=low
.
* [cfbba5b] Imported Upstream version 5.40+svn3296
- Intel X18-M/X25-M/X25-V G2 SSDs: Add firmware bug warning
(Closes: #581996)
- handles missing attributes and prints attributes of SandForce based SSDs
correctly (Closes: #601258)
- Added a note about smartctl is unable to print a warning if autosave is
disabled (Closes: 570892)
- Print help message if no option is specified (Closes: 435579)
- Only some of the controller specific parts of the code may still use the
old ioctl (LP: #658469)
- New drive database entry for F4EG (LP: #684809)
* [b5b85ba] Refreshed patches
* [2b7f0f1] Update to Standards-Version 3.9.1, no changes needed
* [3ed7206] debian/rules: remove make -C examplescripts
* [f8250f3] Pass exampledir in configure
* [0711e68] Install examples files and update-smart-drivedb (Closes: #607689)
(Closes: #593502)
* [f36e375] Do not install CHANGELOG COPYING INSTALL and initd files
* [a76819a] Re-enabled capability-dropping on armel (Closes: #552044)
Checksums-Sha1:
319f7425f1243cecc854ac00a08b95dad05193a8 1562 smartmontools_5.40+svn3296-1.dsc
be225a09f044eb426c3099c8d6200c94310a48e6 635414
smartmontools_5.40+svn3296.orig.tar.gz
e746f3446562b74852a2e23c450996df931bef3f 38877
smartmontools_5.40+svn3296-1.debian.tar.gz
75af22951ef7b03c29604326d20457660fee6e2f 487718
smartmontools_5.40+svn3296-1_i386.deb
Checksums-Sha256:
15224443bfb4a8c5281aa22ce8b460b73a5c4d90c4206ee8b09969519c88d51c 1562
smartmontools_5.40+svn3296-1.dsc
23110996d0a19c8d4744637b1ecfc178ee589f37b3b1b8338ab0453afe0e2ad3 635414
smartmontools_5.40+svn3296.orig.tar.gz
f824805a22f38638814679cc32aab6d50c81d4e4faf16a59ea4b21423ea45359 38877
smartmontools_5.40+svn3296-1.debian.tar.gz
b2ad0d887de9dc0d873fd9f8cca26c2d6b52efadc2f75d8622667af390f58dc4 487718
smartmontools_5.40+svn3296-1_i386.deb
Files:
020107ea231006640b3c0a1b4bbfa460 1562 utils optional
smartmontools_5.40+svn3296-1.dsc
90cd32f9478b715fd72cff7df3f79e1a 635414 utils optional
smartmontools_5.40+svn3296.orig.tar.gz
5c2470bc11501619f94eac947d61d64d 38877 utils optional
smartmontools_5.40+svn3296-1.debian.tar.gz
430924fa0d86c670e3d55b44816cbb6c 487718 utils optional
smartmontools_5.40+svn3296-1_i386.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEARECAAYFAk2GRlIACgkQNxpp46476apKJQCfaFuEyCoFB5b/ouvK3DDERmTq
bXcAn10Vq9+FZGlwisdrxAJzrsJnIzM/
=/+cR
-----END PGP SIGNATURE-----
--- End Message ---
