--- Begin Message ---
Package: libvirt-bin
Version: 0.9.8-2~bpo60+2
Severity: important
Virsh segfaults on connect to (at least) Xen hypervisor.
Gdb output attached below. Same connect to qemu:///session or
lxc:/// works fine. Older 0.9.2 from sq. backports worked fine
too, no configuration change was done.
-- System Information:
Debian Release: 6.0.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/24 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages libvirt-bin depends on:
ii adduser 3.112+nmu2 add and remove users and groups
ii gettext-base 0.18.1.1-3 GNU Internationalization utilities
ii libavahi-client3 0.6.27-2+squeeze1 Avahi client library
ii libavahi-common3 0.6.27-2+squeeze1 Avahi common library
ii libblkid1 2.17.2-9 block device id library
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii libcap-ng0 0.6.4-1 An alternate posix capabilities li
ii libdevmapper1.02.1 2:1.02.48-5 The Linux Kernel Device Mapper use
ii libgcrypt11 1.4.5-2 LGPL Crypto library - runtime libr
ii libgnutls26 2.8.6-1 the GNU TLS library - runtime libr
ii libnl1 1.1-6 library for dealing with netlink s
ii libnuma1 2.0.5-1 Libraries for controlling NUMA pol
ii libparted0debian1 2.3-5 The GNU Parted disk partitioning s
ii libpcap0.8 1.1.1-2+squeeze1 system interface for user-level pa
ii libpciaccess0 0.12.0-1 Generic PCI access library for X
ii libreadline6 6.1-3 GNU readline and history libraries
ii libsasl2-2 2.1.23.dfsg1-7 Cyrus SASL - authentication abstra
ii libudev0 164-3 libudev shared library
ii libuuid1 2.17.2-9 Universally Unique ID library
ii libvirt0 0.9.8-2~bpo60+2 library for interfacing with diffe
ii libxenstore3.0 4.0.1-4 Xenstore communications library fo
ii libxml2 2.7.8.dfsg-2+squeeze1 GNOME XML library
ii libyajl1 1.0.8-1 Yet Another JSON Library
ii logrotate 3.7.8-6 Log rotation utility
Versions of packages libvirt-bin recommends:
ii bridge-utils 1.4-5 Utilities for configuring the Linu
ii dmidecode 2.9-1.2 Dump Desktop Management Interface
ii dnsmasq-base 2.55-2 A small caching DNS proxy and DHCP
ii ebtables 2.0.9.2-2 Ethernet bridge frame table admini
ii gawk 1:3.1.7.dfsg-5 GNU awk, a pattern scanning and pr
ii iproute 20100519-3 networking and traffic control too
ii iptables 1.4.8-3 administration tools for packet fi
ii libxml2-utils 2.7.8.dfsg-2+squeeze1 XML utilities
ii netcat-openbsd 1.89-4 TCP/IP swiss army knife
ii parted 2.3-5 The GNU Parted disk partition resi
ii qemu 0.12.5+dfsg-3squeeze1 fast processor emulator
ii qemu-kvm 0.12.5+dfsg-5+squeeze6 Full virtualization on x86 hardwar
Versions of packages libvirt-bin suggests:
pn policykit-1 <none> (no description available)
pn radvd <none> (no description available)
-- Configuration Files:
/etc/default/libvirt-bin changed:
start_libvirtd="yes"
libvirtd_opts="-d -l"
/etc/default/libvirt-guests changed:
SHUTDOWN_TIMEOUT=0
/etc/libvirt/libvirtd.conf changed:
listen_tls = 0
listen_tcp = 1
listen_addr = "192.168.0.2"
unix_sock_group = "libvirt"
unix_sock_rw_perms = "0770"
auth_unix_ro = "none"
auth_unix_rw = "none"
auth_tcp = "none"
auth_tls = "none"
-- no debconf information
-- GDB output:
# gdb -- /usr/bin/virsh
GNU gdb (GDB) 7.0.1-debian
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/bin/virsh...Reading symbols from
/usr/lib/debug/usr/bin/virsh...done.
(no debugging symbols found)...done.
(gdb) run
Starting program: /usr/bin/virsh
[Thread debugging using libthread_db enabled]
[New Thread 0x7ffff38b7700 (LWP 18477)]
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
virsh # connect xen:///
[New Thread 0x7ffff287f700 (LWP 18483)]
Program received signal SIGSEGV, Segmentation fault.
virNodeSuspendGetTargetMask (bitmask=0x20) at
/tmp/buildd/libvirt-0.9.8/./src/util/virnodesuspend.c:324
324 /tmp/buildd/libvirt-0.9.8/./src/util/virnodesuspend.c: No such file or
directory.
in /tmp/buildd/libvirt-0.9.8/./src/util/virnodesuspend.c
(gdb) bt
#0 virNodeSuspendGetTargetMask (bitmask=0x20) at
/tmp/buildd/libvirt-0.9.8/./src/util/virnodesuspend.c:324
#1 0x00007ffff7aa4734 in xenHypervisorMakeCapabilities (conn=0x694140)
at /tmp/buildd/libvirt-0.9.8/./src/xen/xen_hypervisor.c:2747
#2 0x00007ffff7aa9c9c in xenUnifiedOpen (conn=0x694140, auth=0x7ffff7dd7e40,
flags=0)
at /tmp/buildd/libvirt-0.9.8/./src/xen/xen_driver.c:386
#3 0x00007ffff7a465ab in do_open (name=<value optimized out>,
auth=0x7ffff7dd7e40, flags=0)
at /tmp/buildd/libvirt-0.9.8/./src/libvirt.c:1196
#4 0x00007ffff7a47746 in virConnectOpenAuth (name=0x68ab30 "xen:///",
auth=0x7ffff7dd7e40, flags=0)
at /tmp/buildd/libvirt-0.9.8/./src/libvirt.c:1422
#5 0x0000000000428c4a in cmdConnect (ctl=0x7fffffffea10, cmd=0x68ab10) at
/tmp/buildd/libvirt-0.9.8/./tools/virsh.c:766
#6 0x0000000000415513 in vshCommandRun (ctl=0x7fffffffea10, cmd=0x68ab10)
at /tmp/buildd/libvirt-0.9.8/./tools/virsh.c:16364
#7 0x0000000000428083 in main (argc=<value optimized out>, argv=<value
optimized out>)
at /tmp/buildd/libvirt-0.9.8/./tools/virsh.c:17897
(gdb)
-- Installed Xen packages:
ii libxenstore3.0 4.0.1-4 Xenstore
communications library for Xen
ii linux-image-2.6.32-5-xen-amd64 2.6.32-39 Linux
2.6.32 for 64-bit PCs, Xen dom0 support
ii xen-hypervisor-4.0-amd64 4.0.1-4 The Xen
Hypervisor on AMD64
ii xen-linux-system-2.6-xen-amd64 2.6.32+29 Xen system
with Linux 2.6 for 64-bit PCs (meta-package)
ii xen-linux-system-2.6.32-5-xen-amd64 2.6.32-39 Xen system
with Linux 2.6.32 on 64-bit PCs (meta-package)
ii xen-qemu-dm-4.0 4.0.1-2 Xen Qemu
Device Model virtual machine hardware emulator
ii xen-tools 4.2-1 Tools to
manage Xen virtual servers
ii xen-utils-4.0 4.0.1-4 XEN
administrative tools
ii xen-utils-common 4.0.0-1 XEN
administrative tools - common files
ii xenstore-utils 4.0.1-4 Xenstore
utilities for Xen
-- End of strace output:
[pid 18769] write(12, "/xend/node/", 11 <unfinished ...>
[pid 18770] rt_sigaction(SIGPIPE, {SIG_IGN, [], SA_RESTORER, 0x7fc53c35ff60},
{0x40b7e0, [], SA_RESTORER|SA_SIGINFO, 0x7fc53c35ff60}, 8) = 0
[pid 18769] <... write resumed> ) = 11
[pid 18770] write(7, "\2\0\0\0\0\0\0\0\0\0\0\0\27\0\0\0", 16 <unfinished ...>
[pid 18769] write(12, " HTTP/1.1\r\n", 11 <unfinished ...>
[pid 18770] <... write resumed> ) = 16
[pid 18769] <... write resumed> ) = 11
[pid 18770] write(7, "/local/domain/717/name\0", 23 <unfinished ...>
[pid 18769] write(12, "Host: localhost:8000\r\nAccept-Enc"..., 100 <unfinished
...>
[pid 18772] <... read resumed> "\2\0\0\0\0\0\0\0\0\0\0\0\5\0\0\0", 16) = 16
[pid 18770] <... write resumed> ) = 23
[pid 18769] <... write resumed> ) = 100
[pid 18772] read(7, <unfinished ...>
[pid 18770] futex(0x93da64, FUTEX_WAIT_PRIVATE, 17, NULL <unfinished ...>
[pid 18772] <... read resumed> "c1-i1", 5) = 5
[pid 18769] read(12, <unfinished ...>
[pid 18772] futex(0x93da64, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x93da60,
{FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1
[pid 18770] <... futex resumed> ) = 0
[pid 18772] read(7, <unfinished ...>
[pid 18770] futex(0x93da38, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 18770] rt_sigaction(SIGPIPE, {0x40b7e0, [], SA_RESTORER|SA_SIGINFO,
0x7fc53c35ff60}, NULL, 8) = 0
[pid 18770] rt_sigaction(SIGPIPE, {SIG_IGN, [], SA_RESTORER, 0x7fc53c35ff60},
{0x40b7e0, [], SA_RESTORER|SA_SIGINFO, 0x7fc53c35ff60}, 8) = 0
[pid 18770] write(7, "\2\0\0\0\0\0\0\0\0\0\0\0\25\0\0\0", 16) = 16
[pid 18770] write(7, "/local/domain/717/vm\0", 21) = 21
[pid 18772] <... read resumed> "\2\0\0\0\0\0\0\0\0\0\0\0*\0\0\0", 16) = 16
[pid 18772] read(7, <unfinished ...>
[pid 18770] futex(0x93da64, FUTEX_WAIT_PRIVATE, 19, NULL <unfinished ...>
[pid 18772] <... read resumed> "/vm/814df7eb-b741-8bed-e772-ccc9"..., 42) = 42
[pid 18772] futex(0x93da64, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x93da60,
{FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1
[pid 18770] <... futex resumed> ) = 0
[pid 18772] read(7, <unfinished ...>
[pid 18770] futex(0x93da38, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 18770] rt_sigaction(SIGPIPE, {0x40b7e0, [], SA_RESTORER|SA_SIGINFO,
0x7fc53c35ff60}, NULL, 8) = 0
[pid 18770] gettid() = 18770
[pid 18770] clock_gettime(CLOCK_REALTIME, {1326707277, 49445767}) = 0
[pid 18770] nanosleep({0, 100000000}, <unfinished ...>
[pid 18769] <... read resumed> "H", 1) = 1
[pid 18769] read(12, "T", 1) = 1
[pid 18769] read(12, "T", 1) = 1
[pid 18769] read(12, "P", 1) = 1
[pid 18769] read(12, "/", 1) = 1
[pid 18769] read(12, "1", 1) = 1
[pid 18769] read(12, ".", 1) = 1
[pid 18769] read(12, "1", 1) = 1
[pid 18769] read(12, " ", 1) = 1
[pid 18769] read(12, "2", 1) = 1
[pid 18769] read(12, "0", 1) = 1
[pid 18769] read(12, "0", 1) = 1
[pid 18769] read(12, " ", 1) = 1
[pid 18769] read(12, "O", 1) = 1
[pid 18769] read(12, "K", 1) = 1
[pid 18769] read(12, "\r", 1) = 1
[pid 18769] read(12, "\n", 1) = 1
[pid 18769] read(12, "C", 1) = 1
[pid 18769] read(12, "o", 1) = 1
[pid 18769] read(12, "n", 1) = 1
[pid 18769] read(12, "t", 1) = 1
[pid 18769] read(12, "e", 1) = 1
[pid 18769] read(12, "n", 1) = 1
[pid 18769] read(12, "t", 1) = 1
[pid 18769] read(12, "-", 1) = 1
[pid 18769] read(12, "l", 1) = 1
[pid 18769] read(12, "e", 1) = 1
[pid 18769] read(12, "n", 1) = 1
[pid 18769] read(12, "g", 1) = 1
[pid 18769] read(12, "t", 1) = 1
[pid 18769] read(12, "h", 1) = 1
[pid 18769] read(12, ":", 1) = 1
[pid 18769] read(12, " ", 1) = 1
[pid 18769] read(12, "1", 1) = 1
[pid 18769] read(12, "0", 1) = 1
[pid 18769] read(12, "7", 1) = 1
[pid 18769] read(12, "2", 1) = 1
[pid 18769] read(12, "\r", 1) = 1
[pid 18769] read(12, "\n", 1) = 1
[pid 18769] read(12, "E", 1) = 1
[pid 18769] read(12, "x", 1) = 1
[pid 18769] read(12, "p", 1) = 1
[pid 18769] read(12, "i", 1) = 1
[pid 18769] read(12, "r", 1) = 1
[pid 18769] read(12, "e", 1) = 1
[pid 18769] read(12, "s", 1) = 1
[pid 18769] read(12, ":", 1) = 1
[pid 18769] read(12, " ", 1) = 1
[pid 18769] read(12, "-", 1) = 1
[pid 18769] read(12, "1", 1) = 1
[pid 18769] read(12, "\r", 1) = 1
[pid 18769] read(12, "\n", 1) = 1
[pid 18769] read(12, "C", 1) = 1
[pid 18769] read(12, "o", 1) = 1
[pid 18769] read(12, "n", 1) = 1
[pid 18769] read(12, "t", 1) = 1
[pid 18769] read(12, "e", 1) = 1
[pid 18769] read(12, "n", 1) = 1
[pid 18769] read(12, "t", 1) = 1
[pid 18769] read(12, "-", 1) = 1
[pid 18769] read(12, "t", 1) = 1
[pid 18769] read(12, "y", 1) = 1
[pid 18769] read(12, "p", 1) = 1
[pid 18769] read(12, "e", 1) = 1
[pid 18769] read(12, ":", 1) = 1
[pid 18769] read(12, " ", 1) = 1
[pid 18769] read(12, "a", 1) = 1
[pid 18769] read(12, "p", 1) = 1
[pid 18769] read(12, "p", 1) = 1
[pid 18769] read(12, "l", 1) = 1
[pid 18769] read(12, "i", 1) = 1
[pid 18769] read(12, "c", 1) = 1
[pid 18769] read(12, "a", 1) = 1
[pid 18769] read(12, "t", 1) = 1
[pid 18769] read(12, "i", 1) = 1
[pid 18769] read(12, "o", 1) = 1
[pid 18769] read(12, "n", 1) = 1
[pid 18769] read(12, "/", 1) = 1
[pid 18769] read(12, "s", 1) = 1
[pid 18769] read(12, "x", 1) = 1
[pid 18769] read(12, "p", 1) = 1
[pid 18769] read(12, "\r", 1) = 1
[pid 18769] read(12, "\n", 1) = 1
[pid 18769] read(12, "P", 1) = 1
[pid 18769] read(12, "r", 1) = 1
[pid 18769] read(12, "a", 1) = 1
[pid 18769] read(12, "g", 1) = 1
[pid 18769] read(12, "m", 1) = 1
[pid 18769] read(12, "a", 1) = 1
[pid 18769] read(12, ":", 1) = 1
[pid 18769] read(12, " ", 1) = 1
[pid 18769] read(12, "n", 1) = 1
[pid 18769] read(12, "o", 1) = 1
[pid 18769] read(12, "-", 1) = 1
[pid 18769] read(12, "c", 1) = 1
[pid 18769] read(12, "a", 1) = 1
[pid 18769] read(12, "c", 1) = 1
[pid 18769] read(12, "h", 1) = 1
[pid 18769] read(12, "e", 1) = 1
[pid 18769] read(12, "\r", 1) = 1
[pid 18769] read(12, "\n", 1) = 1
[pid 18769] read(12, "C", 1) = 1
[pid 18769] read(12, "a", 1) = 1
[pid 18769] read(12, "c", 1) = 1
[pid 18769] read(12, "h", 1) = 1
[pid 18769] read(12, "e", 1) = 1
[pid 18769] read(12, "-", 1) = 1
[pid 18769] read(12, "c", 1) = 1
[pid 18769] read(12, "o", 1) = 1
[pid 18769] read(12, "n", 1) = 1
[pid 18769] read(12, "t", 1) = 1
[pid 18769] read(12, "r", 1) = 1
[pid 18769] read(12, "o", 1) = 1
[pid 18769] read(12, "l", 1) = 1
[pid 18769] read(12, ":", 1) = 1
[pid 18769] read(12, " ", 1) = 1
[pid 18769] read(12, "n", 1) = 1
[pid 18769] read(12, "o", 1) = 1
[pid 18769] read(12, "-", 1) = 1
[pid 18769] read(12, "c", 1) = 1
[pid 18769] read(12, "a", 1) = 1
[pid 18769] read(12, "c", 1) = 1
[pid 18769] read(12, "h", 1) = 1
[pid 18769] read(12, "e", 1) = 1
[pid 18769] read(12, "\r", 1) = 1
[pid 18769] read(12, "\n", 1) = 1
[pid 18769] read(12, "\r", 1) = 1
[pid 18769] read(12, "\n", 1) = 1
[pid 18769] read(12, "(node (system Linux) (host cerih"..., 1072) = 1072
[pid 18769] close(12) = 0
[pid 18769] open("/usr/share/locale/locale.alias", O_RDONLY) = 12
[pid 18769] fstat(12, {st_mode=S_IFREG|0644, st_size=2570, ...}) = 0
[pid 18769] mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0x7fc53eaab000
[pid 18769] read(12, "# Locale name alias data base.\n#"..., 4096) = 2570
[pid 18769] read(12, "", 4096) = 0
[pid 18769] close(12) = 0
[pid 18769] munmap(0x7fc53eaab000, 4096) = 0
[pid 18769] open("/usr/share/locale/en_US/LC_MESSAGES/libvirt.mo", O_RDONLY) =
-1 ENOENT (No such file or directory)
[pid 18769] open("/usr/share/locale/en/LC_MESSAGES/libvirt.mo", O_RDONLY) = -1
ENOENT (No such file or directory)
[pid 18769] gettid() = 18769
[pid 18769] clock_gettime(CLOCK_REALTIME, {1326707277, 58946809}) = 0
[pid 18769] gettid() = 18769
[pid 18769] clock_gettime(CLOCK_REALTIME, {1326707277, 59051321}) = 0
[pid 18769] --- SIGSEGV (Segmentation fault) @ 0 (0) ---
[pid 18772] <... ???? resumed> ) = ? <unavailable>
[pid 18770] +++ killed by SIGSEGV +++
[pid 18772] +++ killed by SIGSEGV +++
--- End Message ---
