Your message dated Sun, 02 Dec 2012 11:17:36 +0000 with message-id <[email protected]> and subject line Bug#638339: fixed in blcr 0.8.4-3 has caused the Debian Bug report #638339, regarding blcr: Does not build/work with Linux 2.6.39 or later to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 638339: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638339 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: linux-2.6 Version: 3.1.4-1 Severity: normal Dear Maintainer, I just did a dist-upgrade and this new version of linux image was installed. During the installation it complained when setting up the modules that linux-headers-3.1.0-1-486 be installed (I do not have the exact message as it scrolled past and I could not scroll back to it). When I tried to install linux-headers-3.1.0-1-486 it complained of a build error, and suggested I look in a log file in which I found:- checking compiler to build kernel modules... gcc (default) checking for BSD- or MS-compatible name lister (nm)... (cached) /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... (cached) BSD nm configure: error: --with-linux argument '3.1.0-1-486' is neither a kernel version string nor a full path make[3]: *** [/var/lib/dkms/blcr/0.8.4/build/config-stamp] Error 1 make[2]: *** [_module_/var/lib/dkms/blcr/0.8.4/build] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 make: Leaving directory `/usr/src/linux-headers-3.1.0-1-486' I have not yet tried to see if this kernel is bootable, but I do have an earlier 3.0 kernel installed so I can always fall back to that. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information not available ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at <unassigned> (32-bit, prefetchable) Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA controller]) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 6 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at 1800 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) (prog-if 00 [UHCI]) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 6 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) (prog-if 00 [UHCI]) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 6 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03) (prog-if 00 [UHCI]) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 6 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI]) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 10 Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=0a, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: e0200000-e07fffff Prefetchable memory behind bridge: 40000000-47ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 6 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] Region 5: Memory at 48000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: i801_smbus 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at e0100c00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at e0100800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03) (prog-if 00 [Generic]) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH Modem 02:02.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 6 Region 0: Memory at e0204000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: b44 02:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Subsystem: Intel Corporation Device [8086:2702] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at e0206000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 02:06.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller [1217:7223] Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 6 Region 0: Memory at e0207000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 40000000-43fff000 (prefetchable) Memory window 1: 4c000000-4ffff000 I/O window 0: 00003000-000030ff I/O window 1: 00003400-000034ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 02:06.1 CardBus bridge [0607]: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller [1217:7223] Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 6 Region 0: Memory at e0208000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 44000000-47fff000 (prefetchable) Memory window 1: 50000000-53fff000 I/O window 0: 00003800-000038ff I/O window 1: 00003c00-00003cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 02:06.2 System peripheral [0880]: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator [1217:7110] Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 6 Region 0: Memory at e0209000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 02:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI]) Subsystem: QUANTA Computer Inc Device [152d:0727] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at e020a000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub" Bus 003 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.0.0-2-486 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-3.1.0-1-486 depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.4 ii module-init-tools 3.16-1 ii yaird [linux-initramfs-tool] 0.0.13-5 Versions of packages linux-image-3.1.0-1-486 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.1.0-1-486 suggests: pn grub-pc 1.99-14 pn linux-doc-3.1 <none> Versions of packages linux-image-3.1.0-1-486 is related to: pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-ipw2x00 0.34 pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.1.0-1-486/postinst/depmod-error-initrd-3.1.0-1-486: false linux-image-3.1.0-1-486/postinst/missing-firmware-3.1.0-1-486: linux-image-3.1.0-1-486/postinst/ignoring-ramdisk: linux-image-3.1.0-1-486/prerm/removing-running-kernel-3.1.0-1-486: true
--- End Message ---
--- Begin Message ---Source: blcr Source-Version: 0.8.4-3 We believe that the bug you reported is fixed in the latest version of blcr, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to [email protected], and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Alan Woodland <[email protected]> (supplier of updated blcr package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing [email protected]) -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 1.8 Date: Sun, 2 Dec 2012 12:17:58 +0000 Source: blcr Binary: blcr-util blcr-testsuite libcr0 libcr-dbg lib32cr0 libcr-dev Architecture: source amd64 Version: 0.8.4-3 Distribution: unstable Urgency: high Maintainer: Alan Woodland <[email protected]> Changed-By: Alan Woodland <[email protected]> Description: blcr-testsuite - Userspace tools to Checkpoint and Restart Linux processes blcr-util - Userspace tools to Checkpoint and Restart Linux processes lib32cr0 - (32bit) Libraries to Checkpoint and Restart Linux processes libcr-dbg - Libraries to Checkpoint and Restart Linux processes libcr-dev - Development files for BLCR libcr0 - Libraries to Checkpoint and Restart Linux processes Closes: 638339 690072 Changes: blcr (0.8.4-3) unstable; urgency=high . * Preparing for Wheezy release * Drop -dkms package entirely since no kernel support anyway, userspace library will behave sanely still (Closes: #638339) * High urgency because of RC bug fixes * Conflicts with older -dkms package to force removal on upgraded systems * Drop recommends to suggets (Closes: #690072) Checksums-Sha1: 72063b01dba9ce18b67e314e9d9882518057daaa 2038 blcr_0.8.4-3.dsc d4e6fddeca3083da21951899cf5fcd74ee8f627d 691828 blcr_0.8.4-3.debian.tar.gz e3610a0ac9778b19718a639540cc4ef722edd36b 43076 blcr-util_0.8.4-3_amd64.deb 722b672c523d90d51082d8599171cbc0ae74e4d4 350012 blcr-testsuite_0.8.4-3_amd64.deb 851b8ea211167b3e549f3cf01a170bdc97c5eba0 37140 libcr0_0.8.4-3_amd64.deb a3ed961f9645589738fa710dfc76e7495f912653 1133304 libcr-dbg_0.8.4-3_amd64.deb af7acb6cbc91fd2d2dc1206c6d9e1e7c5e619d7e 36678 lib32cr0_0.8.4-3_amd64.deb b68e211e20cfc2ff71d263dc062e6bd68806eaa6 43008 libcr-dev_0.8.4-3_amd64.deb Checksums-Sha256: 0d15518e6a407319fab4b42a66c22146efcf4f2c728fd4708679f3290f1d6cdf 2038 blcr_0.8.4-3.dsc e174df3b31159b5ef203530dd7d075b9bc6325a287e528edb0816fcc0f837689 691828 blcr_0.8.4-3.debian.tar.gz 4ec0142091e13ae297768bc44a426877261713a2ad705d5c60ecdc49d3bca2bc 43076 blcr-util_0.8.4-3_amd64.deb 808a903f2c8f3451a4a4893eb3aa8cb2b1b7873f6ecc4f19a58301ee913d7853 350012 blcr-testsuite_0.8.4-3_amd64.deb a4bc2932689efdbfadee5ad38ab7969309400614342509593c255c2432b541fc 37140 libcr0_0.8.4-3_amd64.deb 366ca9b99d198e5049ffe85470c5a33255953884c1dcb5bf20b89b85a42e196f 1133304 libcr-dbg_0.8.4-3_amd64.deb 228d7fb4a49fcf7480711a1e8f82e1276f4fed6195f1196b42f6d487943c43fe 36678 lib32cr0_0.8.4-3_amd64.deb 37718d976ca03964798fda3d10a2455b6e85b803052de60e64e796ed778b9135 43008 libcr-dev_0.8.4-3_amd64.deb Files: da5bca0eb026f4bacca1e54f6733b9da 2038 misc optional blcr_0.8.4-3.dsc c4028b435c635bc53b9242ff9649750b 691828 misc optional blcr_0.8.4-3.debian.tar.gz 7b134e5a482fbc1ddd6a475ab6c2ba13 43076 misc optional blcr-util_0.8.4-3_amd64.deb 67a371a879d6bba7736dd964032e4575 350012 misc optional blcr-testsuite_0.8.4-3_amd64.deb 86e174f14690309ba85edd2a7877efdf 37140 libs optional libcr0_0.8.4-3_amd64.deb c9290e87cb07cbd251437e7c0b42fdb5 1133304 debug extra libcr-dbg_0.8.4-3_amd64.deb f394686657355e46d4cb50e235862646 36678 libs optional lib32cr0_0.8.4-3_amd64.deb df31bcd95415d5930719a4de4ae1595e 43008 libdevel optional libcr-dev_0.8.4-3_amd64.deb -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAEBCAAGBQJQuzaDAAoJEFCYAhxwUYB4MkAQAK7cUMp5ldIZub8ZQV4pGrnK USQ6B/7ZJe6pKvmtpMNp2MqOgMjGYpElwzhpRyO51FQW1mrU/zCGTINCxQoanJ6e NEhL19PMSV5QfBpTV5AiFYeh2CD5d6R5xT4GJEbwG1xK7DBINKYKxUaewkPHczjn GYhGNJ5ATmZKMIUeAs5zKn4Vh8Dl2BDANGgbSBoFFtJcr8XK3oX4xVQCuKHZRvtf dkv5bEhlXK+4rFPXFs1rZUK1D97n5+VE78v0WLp6wQsxQf2agjVc7kItfDdMKh4N OEP7q7QmX4gGnVIuOuSU2udoMwYGHrH0b5BJkxf3hetGiUn6oSRLhxg4hDBXjvDb EgU28RfRad1QnjiCKYCaePF5jGqGmxQ/tUwCZa0FGp4NAKMgGpoNIU0NSehyJgLi jlHd4uD+oQn6ry4wbM26n/KU42I1YHc6qWiDw4MAXaSR57dy2oOeYGlHeI3Pbi53 xZovGVKszOhLcDOu3qgtdQ+TFH6jdm/OiWHTMEdems5ovEWmtJjASkilMIJWNYmo 9q/PTBPN1JVl17rQ6daJXWBR6jVGs7bLJE/xRse0IXPpakWy3uQ6/DBbOjcir6aF uRA8ExUtjwQ/3AzrqMr4IiNAQumFP5duKBtlmnPfGHUQ+mHBfeQm6YZSdx8lnMMT /Ga9zz3EYGrpFFpc+kmC =Pe+O -----END PGP SIGNATURE-----
--- End Message ---
