--- Begin Message ---
Package: linux-image
Version: 3.7-trunk-powerpc
Previous (archived) bug report:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=684630
I have similar issue with my two debian machines.
First machine has Debian 7 PPC (Mac MINI Power10,1). Second Debian 7 486
(Old Notebook Asus M3N)
Booth linux machines with Debian 7 works really slow with USB.
No solution found yet. rmmod && modprobe has no effect.
When I connect USB stick to Mac Book Pro it gives me 15-16 MB/S. When I
connect the same USB Stick to the Debian machines booth give me 5-6 MB/S.
With my external USB harddrive (western digital) everything even worth.
My WD gives me 600 KB/s. Completely unusable.
I've tried linux-image-3.7-trunk-powerpc for Mac Mini and
linux-image-3.7-trunk-486 for my notebook. No changes.
Keeping one device (WD) without hub, or even keyboard attached - no changes.
Adding ohci_hcd to the blacklist - no changes.
I think here is a some magic flag in the kernel config, which is enabled
or disabled after Debian 6.
root@mini:/mnt# lsusb
Bus 001 Device 007: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 03f0:2b17 Hewlett-Packard LaserJet 1020
Bus 001 Device 009: ID 03f0:3c05 Hewlett-Packard
Bus 001 Device 010: ID 1058:1100 Western Digital Technologies, Inc.
root@mini:/mnt#
A little bit more info on forum:
http://forums.debian.net/viewtopic.php?f=10&t=94277
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7-trunk-powerpc ([email protected])
(gcc version 4.7.2 (Debian 4.7.2-5) ) #1 Debian 3.7.8-1~experimental.1
[ 0.000000] Found initrd at 0xc1500000:0xc2004000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000
revision: 0xd2
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: Mac mini
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware
bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff ->
0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff ->
0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware
bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff ->
0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff ->
0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware
bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff ->
0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 55
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=260, gen1=261
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00000000-0x2fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x30000000-0x3fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x3fffffff]
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0582e04, node_mem_map
c071f000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 195072 pages, LIFO batch:31
[ 0.000000] HighMem zone: 512 pages used for memmap
[ 0.000000] HighMem zone: 65024 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 260096
[ 0.000000] Kernel command line:
root=UUID=a2eac765-1e60-4860-8cc6-2b50fdb2737a ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] High memory: 262144k
[ 0.000000] Memory: 1018580k/1048576k available (5428k kernel code, 29996k
reserved, 300k data, 1508k bss, 240k init)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfded8000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfded8000 : vmalloc & ioremap
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max
1 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[ 0.000000] time_init: decrementer frequency = 41.620997 MHz
[ 0.000000] time_init: processor frequency = 1416.666661 MHz
[ 0.000000] clocksource: timebase mult[1806bddd] shift[24] registered
[ 0.000000] clockevent: decrementer mult[aa7ac75] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000986] pid_max: default: 32768 minimum: 301
[ 0.001042] Security Framework initialized
[ 0.001065] AppArmor: AppArmor disabled by boot time parameter
[ 0.001084] Mount-cache hash table entries: 512
[ 0.001342] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to
"l2-cache#1"
[ 0.003000] Initializing cgroup subsys cpuacct
[ 0.003011] Initializing cgroup subsys memory
[ 0.003034] Initializing cgroup subsys devices
[ 0.003041] Initializing cgroup subsys freezer
[ 0.003048] Initializing cgroup subsys net_cls
[ 0.003055] Initializing cgroup subsys blkio
[ 0.003062] Initializing cgroup subsys perf_event
[ 0.003224] MPC7450 family performance monitor hardware support registered
[ 0.003930] devtmpfs: initialized
[ 0.004457] regulator-dummy: no parameters
[ 0.004571] NET: Registered protocol family 16
[ 0.005107] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.005120] channel 0 bus <multibus>
[ 0.005128] channel 1 bus <multibus>
[ 0.005158] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.005168] channel 0 bus <multibus>
[ 0.005181] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.005193] channel 1 bus <multibus>
[ 0.005208] channel 2 bus <multibus>
[ 0.005381] PCI: Probing PCI hardware
[ 0.005451] PCI host bridge to bus 0000:00
[ 0.005470] pci_bus 0000:00: root bus resource [io 0x802000-0x1001fff] (bus
address [0x0000-0x7fffff])
[ 0.005487] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.005500] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]
[ 0.005513] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.005527] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.005556] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000
[ 0.005644] pci 0000:00:10.0: [1002:5962] type 00 class 0x030000
[ 0.005663] pci 0000:00:10.0: reg 10: [mem 0x98000000-0x9fffffff pref]
[ 0.005673] pci 0000:00:10.0: reg 14: [io 0x802400-0x8024ff]
[ 0.005683] pci 0000:00:10.0: reg 18: [mem 0x90000000-0x9000ffff]
[ 0.005705] pci 0000:00:10.0: reg 30: [mem 0x90020000-0x9003ffff pref]
[ 0.005736] pci 0000:00:10.0: supports D1 D2
[ 0.005785] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.005927] PCI host bridge to bus 0001:10
[ 0.005940] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff]
[ 0.005952] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.005965] pci_bus 0001:10: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.005977] pci_bus 0001:10: root bus resource [bus 10-ff]
[ 0.005989] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff
[ 0.006012] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000
[ 0.006078] pci 0001:10:17.0: [106b:003e] type 00 class 0xff0000
[ 0.006092] pci 0001:10:17.0: reg 10: [mem 0x80000000-0x8007ffff]
[ 0.006149] pci 0001:10:18.0: [106b:003f] type 00 class 0x0c0310
[ 0.006163] pci 0001:10:18.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.006223] pci 0001:10:19.0: [106b:003f] type 00 class 0x0c0310
[ 0.006237] pci 0001:10:19.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.006294] pci 0001:10:1a.0: [106b:003f] type 00 class 0x0c0310
[ 0.006308] pci 0001:10:1a.0: reg 10: [mem 0x80083000-0x80083fff]
[ 0.006370] pci 0001:10:1b.0: [1033:0035] type 00 class 0x0c0310
[ 0.006387] pci 0001:10:1b.0: reg 10: [mem 0x80082000-0x80082fff]
[ 0.006445] pci 0001:10:1b.0: supports D1 D2
[ 0.006451] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.006476] pci 0001:10:1b.1: [1033:0035] type 00 class 0x0c0310
[ 0.006493] pci 0001:10:1b.1: reg 10: [mem 0x80081000-0x80081fff]
[ 0.006552] pci 0001:10:1b.1: supports D1 D2
[ 0.006557] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.006583] pci 0001:10:1b.2: [1033:00e0] type 00 class 0x0c0320
[ 0.006600] pci 0001:10:1b.2: reg 10: [mem 0x80080000-0x800800ff]
[ 0.006659] pci 0001:10:1b.2: supports D1 D2
[ 0.006664] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.006745] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 10
[ 0.007156] PCI host bridge to bus 0002:20
[ 0.007173] pci_bus 0002:20: root bus resource [io 0xff7fe000-0xffffdfff]
(bus address [0x0000-0x7fffff])
[ 0.007189] pci_bus 0002:20: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.007202] pci_bus 0002:20: root bus resource [bus 20-ff]
[ 0.007215] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to ff
[ 0.007236] pci 0002:20:0b.0: [106b:0036] type 00 class 0x060000
[ 0.007282] pci 0002:20:0d.0: [106b:003b] type 00 class 0xff0000
[ 0.007295] pci 0002:20:0d.0: reg 10: [mem 0xf5004000-0xf5007fff]
[ 0.007341] pci 0002:20:0e.0: [106b:0031] type 00 class 0x0c0010
[ 0.007355] pci 0002:20:0e.0: reg 10: [mem 0xf5000000-0xf5000fff]
[ 0.007399] pci 0002:20:0e.0: supports D1 D2
[ 0.007405] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.007425] pci 0002:20:0f.0: [106b:0032] type 00 class 0x020000
[ 0.007437] pci 0002:20:0f.0: reg 10: [mem 0xf5200000-0xf53fffff]
[ 0.007466] pci 0002:20:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref]
[ 0.007533] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to 20
[ 0.007769] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff]
[ 0.007792] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff]
[ 0.007798] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.007803] pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff]
[ 0.007809] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff]
[ 0.007815] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.007820] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.007826] pci_bus 0002:20: resource 4 [io 0xff7fe000-0xffffdfff]
[ 0.007832] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.009038] bio: create slab <bio-0> at 0
[ 0.009245] vgaarb: device added:
PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.009267] vgaarb: loaded
[ 0.009275] vgaarb: bridge control possible 0000:00:10.0
[ 0.009444] SCSI subsystem initialized
[ 0.009528] libata version 3.00 loaded.
[ 0.009792] Switching to clocksource timebase
[ 0.016155] NET: Registered protocol family 2
[ 0.016458] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.017887] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.018254] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.018395] TCP: reno registered
[ 0.018414] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.018437] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.018608] NET: Registered protocol family 1
[ 0.018673] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 0.018689] pci 0001:10:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.018704] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 0.018715] pci 0001:10:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.018739] pci 0001:10:1a.0: enabling device (0000 -> 0002)
[ 0.073869] pci 0001:10:1b.0: enabling device (0000 -> 0002)
[ 0.129831] pci 0001:10:1b.1: enabling device (0000 -> 0002)
[ 0.185827] pci 0001:10:1b.2: enabling device (0004 -> 0006)
[ 0.185861] PCI: CLS mismatch (32 != 1020), using 32 bytes
[ 0.185976] Unpacking initramfs...
[ 0.586768] Freeing initrd memory: 11280k freed
[ 0.587978] Thermal assist unit not available
[ 0.588405] audit: initializing netlink socket (disabled)
[ 0.588452] type=2000 audit(1361020935.584:1): initialized
[ 0.617556] bounce pool size: 64 pages
[ 0.617707] VFS: Disk quotas dquot_6.5.2
[ 0.617739] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.617857] msgmni has been set to 1501
[ 0.618262] alg: No test for stdrng (krng)
[ 0.618315] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 0.618372] io scheduler noop registered
[ 0.618382] io scheduler deadline registered
[ 0.618398] io scheduler cfq registered (default)
[ 0.618652] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
[ 0.815949] radeonfb 0000:00:10.0: Invalid ROM contents
[ 0.815965] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
[ 0.815972] radeonfb: Retrieved PLL infos from Open Firmware
[ 0.815983] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz,
System=250.00 MHz
[ 0.815997] radeonfb: PLL min 12000 max 35000
[ 0.910849] i2c i2c-2: unable to read EDID block.
[ 1.062843] i2c i2c-2: unable to read EDID block.
[ 1.214843] i2c i2c-2: unable to read EDID block.
[ 1.445816] radeonfb: Monitor 1 type CRT found
[ 1.445825] radeonfb: EDID probed
[ 1.445832] radeonfb: Monitor 2 type CRT found
[ 1.445840] radeonfb: EDID probed
[ 1.445855] Display is GTF capable
[ 1.473215] Console: switching to colour frame buffer device 128x48
[ 1.488696] radeonfb (0000:00:10.0): ATI Radeon 5962 "Yb"
[ 1.489170] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.489736] pmac_zilog: 0.6 (Benjamin Herrenschmidt
<[email protected]>)
[ 1.490004] Serial: MPC52xx PSC UART driver
[ 1.490212] Generic non-volatile memory driver v1.1
[ 1.490430] Linux agpgart interface v0.103
[ 1.490585] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 1.491804] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 1.492077] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 1.492366] MacIO PCI driver attached to Intrepid chipset
[ 1.493128] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22) is a
Z85c30 ESCC - Serial port
[ 1.493574] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23) is a
Z85c30 ESCC - Serial port
[ 1.494303] pata-pci-macio 0002:20:0d.0: enabling device (0000 -> 0002)
[ 1.494619] adb: starting probe task...
[ 1.494750] adb: finished probe task...
[ 1.509836] pata-pci-macio 0002:20:0d.0: Activating pata-macio chipset
UniNorth ATA-6, Apple bus ID 3
[ 1.510416] scsi0 : pata_macio
[ 1.510615] ata1: PATA max UDMA/100 irq 39
[ 1.682172] ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
[ 1.682375] ata1.00: 195371568 sectors, multi 16: LBA48
[ 1.682552] ata1.01: ATAPI: MATSHITADVD-R UJ-835F, GGND, max UDMA/66
[ 1.690097] ata1.00: configured for UDMA/100
[ 1.706079] ata1.01: configured for UDMA/66
[ 1.714944] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21
PQ: 0 ANSI: 5
[ 1.723124] scsi 0:0:1:0: CD-ROM MATSHITA DVD-R UJ-835F GGND
PQ: 0 ANSI: 5
[ 2.529831] pata-macio 0.00020000:ata-3: Activating pata-macio chipset
KeyLargo ATA-3, Apple bus ID 0
[ 2.536654] scsi1 : pata_macio
[ 2.543236] ata2: PATA max MWDMA2 irq 24
[ 2.549976] mousedev: PS/2 mouse device common for all mice
[ 2.558877] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 2.565433] drop_monitor: Initializing network drop monitor service
[ 2.572191] TCP: cubic registered
[ 2.578833] NET: Registered protocol family 10
[ 2.585738] mip6: Mobile IPv6
[ 2.592325] NET: Registered protocol family 17
[ 2.599167] PM: Hibernation image not present or could not be loaded.
[ 2.599187] registered taskstats version 1
[ 2.606119] input: PMU as /devices/virtual/input/input0
[ 2.615171] rtc-generic rtc-generic: setting system clock to 2013-02-16
13:22:18 UTC (1361020938)
[ 2.702200] Freeing unused kernel memory: 240k freed
[ 2.754232] udevd[51]: starting version 175
[ 2.911009] usbcore: registered new interface driver usbfs
[ 2.970958] sungem.c:v1.0 David S. Miller <[email protected]>
[ 2.979952] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100
GB/93.1 GiB)
[ 2.992657] usbcore: registered new interface driver hub
[ 3.013345] sd 0:0:0:0: [sda] Write Protect is off
[ 3.020765] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.032754] gem 0002:20:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet
00:11:24:74:b2:68
[ 3.041537] usbcore: registered new device driver usb
[ 3.060711] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.111310] sda: [mac] sda1 sda2 sda3 sda4 sda5
[ 3.120039] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.129712] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
[ 3.138919] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.155604] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 3.163409] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.175498] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.183528] ehci_hcd 0001:10:1b.2: EHCI Host Controller
[ 3.191519] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 3.199217] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus
number 1
[ 3.207894] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 3.238018] firewire_ohci 0002:20:0e.0: added OHCI v1.10 device as card 0, 8
IR + 8 IT contexts, quirks 0x0
[ 3.246183] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
[ 3.265858] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[ 3.274024] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.281997] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.289901] usb usb1: Product: EHCI Host Controller
[ 3.297752] usb usb1: Manufacturer: Linux 3.7-trunk-powerpc ehci_hcd
[ 3.305627] usb usb1: SerialNumber: 0001:10:1b.2
[ 3.314128] hub 1-0:1.0: USB hub found
[ 3.321985] hub 1-0:1.0: 5 ports detected
[ 3.331914] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.349764] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 3.357661] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 3.365388] ohci_hcd 0001:10:1a.0: OHCI Host Controller
[ 3.372957] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus
number 2
[ 3.380878] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
[ 3.461691] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.469304] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.476816] usb usb2: Product: OHCI Host Controller
[ 3.484227] usb usb2: Manufacturer: Linux 3.7-trunk-powerpc ohci_hcd
[ 3.491652] usb usb2: SerialNumber: 0001:10:1a.0
[ 3.499678] hub 2-0:1.0: USB hub found
[ 3.507103] hub 2-0:1.0: 2 ports detected
[ 3.514646] ohci_hcd 0001:10:1b.0: OHCI Host Controller
[ 3.522068] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus
number 3
[ 3.529736] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
[ 3.609623] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.617093] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.624407] usb usb3: Product: OHCI Host Controller
[ 3.631664] usb usb3: Manufacturer: Linux 3.7-trunk-powerpc ohci_hcd
[ 3.638942] usb usb3: SerialNumber: 0001:10:1b.0
[ 3.647458] hub 3-0:1.0: USB hub found
[ 3.654631] hub 3-0:1.0: 3 ports detected
[ 3.662054] ohci_hcd 0001:10:1b.1: OHCI Host Controller
[ 3.669235] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus
number 4
[ 3.678639] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
[ 3.758050] firewire_core 0002:20:0e.0: created device fw0: GUID
001124fffe74b268, S400
[ 3.766806] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.773690] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.780525] usb usb4: Product: OHCI Host Controller
[ 3.787271] usb usb4: Manufacturer: Linux 3.7-trunk-powerpc ohci_hcd
[ 3.794028] usb usb4: SerialNumber: 0001:10:1b.1
[ 3.801738] hub 4-0:1.0: USB hub found
[ 3.808460] hub 4-0:1.0: 2 ports detected
[ 3.976850] PM: Starting manual resume from disk
[ 3.983367] PM: Hibernation image partition 8:4 present
[ 3.983370] PM: Looking for hibernation image.
[ 3.983783] PM: Image not found (code -22)
[ 3.983788] PM: Hibernation image not present or could not be loaded.
[ 4.092502] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.233856] usb 2-1: new full-speed USB device number 2 using ohci_hcd
[ 4.377854] usb 2-1: device descriptor read/64, error -62
[ 4.625845] usb 2-1: device descriptor read/64, error -62
[ 4.869840] usb 2-1: new full-speed USB device number 3 using ohci_hcd
[ 5.013833] usb 2-1: device descriptor read/64, error -62
[ 5.261851] usb 2-1: device descriptor read/64, error -62
[ 5.505861] usb 2-1: new full-speed USB device number 4 using ohci_hcd
[ 5.921840] usb 2-1: device not accepting address 4, error -62
[ 6.061875] usb 2-1: new full-speed USB device number 5 using ohci_hcd
[ 6.442709] udevd[271]: starting version 175
[ 6.473863] usb 2-1: device not accepting address 5, error -62
[ 6.486274] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 6.677853] usb 4-1: new low-speed USB device number 2 using ohci_hcd
[ 6.917233] usb 4-1: New USB device found, idVendor=04d9, idProduct=1702
[ 6.924963] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.932613] usb 4-1: Product: USB Keyboard
[ 6.940225] usb 4-1: Manufacturer:
[ 8.479314] usbcore: registered new interface driver usbhid
[ 8.487003] usbhid: USB HID core driver
[ 8.524520] input: USB Keyboard as
/devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1:1.0/input/input1
[ 8.543174] hid-generic 0003:04D9:1702.0001: input,hidraw0: USB HID v1.10
Keyboard [ USB Keyboard] on usb-0001:10:1b.1-1/input0
[ 8.580840] input: USB Keyboard as
/devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1:1.1/input/input2
[ 8.597249] hid-generic 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10
Device [ USB Keyboard] on usb-0001:10:1b.1-1/input1
[ 10.169041] Adding 3020680k swap on /dev/sda4. Priority:-1 extents:1
across:3020680k
[ 10.225306] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 10.528004] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 10.781596] loop: module loaded
[ 11.211856] snd-powermac no longer handles any machines with a layout-id
property in the device-tree, use snd-aoa.
[ 27.085636] RPC: Registered named UNIX socket transport module.
[ 27.094154] RPC: Registered udp transport module.
[ 27.102679] RPC: Registered tcp transport module.
[ 27.110974] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 27.165633] FS-Cache: Loaded
[ 27.198676] Key type dns_resolver registered
[ 27.250873] FS-Cache: Netfs 'nfs' registered for caching
[ 27.322713] Installing knfsd (copyright (C) 1996 [email protected]).
[ 31.722176] sungem_phy: PHY ID: 4061e4, addr: 0
[ 31.722528] gem 0002:20:0f.0 eth0: Found BCM5221 PHY
[ 31.723616] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.452669] Bluetooth: Core ver 2.16
[ 33.453556] NET: Registered protocol family 31
[ 33.454406] Bluetooth: HCI device and connection manager initialized
[ 33.456221] Bluetooth: HCI socket layer initialized
[ 33.457081] Bluetooth: L2CAP socket layer initialized
[ 33.458146] Bluetooth: SCO socket layer initialized
[ 33.507942] Bluetooth: RFCOMM TTY layer initialized
[ 33.508799] Bluetooth: RFCOMM socket layer initialized
[ 33.509587] Bluetooth: RFCOMM ver 1.11
[ 33.536291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.537128] Bluetooth: BNEP filters: protocol multicast
[ 33.539140] Bluetooth: BNEP socket layer initialized
[ 33.999774] radeonfb 0000:00:10.0: Invalid ROM contents
[ 33.999919] radeonfb 0000:00:10.0: Invalid ROM contents
[ 34.099506] [drm] Initialized drm 1.1.0 20060810
[ 34.129985] gem 0002:20:0f.0 eth0: Link is up at 100 Mbps, full-duplex
[ 34.130116] gem 0002:20:0f.0 eth0: Pause is disabled
[ 34.130148] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.339030] [drm] radeon defaulting to userspace modesetting.
[ 34.340517] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 34.340527] [drm] No driver support for vblank timestamp query.
[ 34.340534] [drm] Initialized radeon 1.33.0 20080528 for 0000:00:10.0 on
minor 0
[ 34.826784] lp: driver loaded but no devices found
[ 34.903532] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
[ 34.903549] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
[ 35.268086] [drm] Setting GART location based on new memory map
[ 35.268219] [drm] Loading R200 Microcode
[ 35.454163] platform radeon_cp.0: firmware: agent aborted loading
radeon/R200_cp.bin (not found?)
[ 35.454573] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[ 39.694565] input: Mouseemu virtual keyboard as /devices/virtual/input/input3
[ 39.697054] input: Mouseemu virtual mouse as /devices/virtual/input/input4
[ 166.861931] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[ 166.995695] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 166.995705] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 166.995710] usb 1-1: Product: USB2.0 Hub
[ 166.997120] hub 1-1:1.0: USB hub found
[ 166.997445] hub 1-1:1.0: 4 ports detected
[ 167.270746] usb 1-1.1: new high-speed USB device number 5 using ehci_hcd
[ 167.362832] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=2b17
[ 167.362841] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 167.362847] usb 1-1.1: Product: HP LaserJet 1020
[ 167.362852] usb 1-1.1: Manufacturer: Hewlett-Packard
[ 167.362857] usb 1-1.1: SerialNumber: JL2NBET
[ 167.434244] usb 1-1.2: new high-speed USB device number 6 using ehci_hcd
[ 167.551757] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=3c05
[ 167.551765] usb 1-1.2: New USB device strings: Mfr=10, Product=11,
SerialNumber=12
[ 167.551771] usb 1-1.2: Product: HP ScanJet 1000
[ 167.551776] usb 1-1.2: Manufacturer: Hewlett-Packard
[ 167.551781] usb 1-1.2: SerialNumber: CN0617703305JP
[ 170.926449] usblp 1-1.1:1.0: usblp0: USB Bidirectional printer dev 5 if 0
alt 0 proto 2 vid 0x03F0 pid 0x2B17
[ 170.926950] usbcore: registered new interface driver usblp
[ 554.690380] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1865.966099] usb 1-1: USB disconnect, device number 4
[ 1865.966113] usb 1-1.1: USB disconnect, device number 5
[ 1865.966340] usblp0: removed
[ 1865.968122] usb 1-1.2: USB disconnect, device number 6
[ 1869.073569] usb 1-1: new high-speed USB device number 7 using ehci_hcd
[ 1869.207330] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 1869.207339] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1869.207345] usb 1-1: Product: USB2.0 Hub
[ 1869.208718] hub 1-1:1.0: USB hub found
[ 1869.209079] hub 1-1:1.0: 4 ports detected
[ 1869.482374] usb 1-1.1: new high-speed USB device number 8 using ehci_hcd
[ 1869.574346] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=2b17
[ 1869.574357] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1869.574363] usb 1-1.1: Product: HP LaserJet 1020
[ 1869.574368] usb 1-1.1: Manufacturer: Hewlett-Packard
[ 1869.574373] usb 1-1.1: SerialNumber: JL2NBET
[ 1869.576942] usblp 1-1.1:1.0: usblp0: USB Bidirectional printer dev 8 if 0
alt 0 proto 2 vid 0x03F0 pid 0x2B17
[ 1869.649865] usb 1-1.2: new high-speed USB device number 9 using ehci_hcd
[ 1869.767130] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=3c05
[ 1869.767138] usb 1-1.2: New USB device strings: Mfr=10, Product=11,
SerialNumber=12
[ 1869.767144] usb 1-1.2: Product: HP ScanJet 1000
[ 1869.767149] usb 1-1.2: Manufacturer: Hewlett-Packard
[ 1869.767154] usb 1-1.2: SerialNumber: CN0617703305JP
[ 1925.602408] usb 1-1.3: new high-speed USB device number 10 using ehci_hcd
[ 1925.694375] usb 1-1.3: New USB device found, idVendor=1058, idProduct=1100
[ 1925.694385] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1925.694391] usb 1-1.3: Product: My Book
[ 1925.694396] usb 1-1.3: Manufacturer: Western Digital
[ 1925.694401] usb 1-1.3: SerialNumber: 57442D574341534E30303431303733
[ 1925.762260] Initializing USB Mass Storage driver...
[ 1925.762511] scsi2 : usb-storage 1-1.3:1.0
[ 1925.762676] usbcore: registered new interface driver usb-storage
[ 1925.762680] USB Mass Storage support registered.
[ 1926.762460] scsi 2:0:0:0: Direct-Access WD 7500AAC External 1.65
PQ: 0 ANSI: 4
[ 1926.763617] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1926.767047] sd 2:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750
GB/698 GiB)
[ 1926.767916] sd 2:0:0:0: [sdb] Write Protect is off
[ 1926.767929] sd 2:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 1926.769141] sd 2:0:0:0: [sdb] No Caching mode page present
[ 1926.769152] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1926.772633] sd 2:0:0:0: [sdb] No Caching mode page present
[ 1926.772646] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1926.777140] sdb: sdb1
[ 1926.780101] sd 2:0:0:0: [sdb] No Caching mode page present
[ 1926.780112] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1926.780121] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1969.001504] EXT4-fs (sdb1): Unrecognized mount option "0" or missing value
[ 1985.549091] EXT4-fs (sdb1): recovery complete
[ 1985.549775] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
(null)
--- End Message ---
