Your message dated Sun, 23 Jun 2013 16:08:48 +0200 with message-id <[email protected]> and subject line Closing has caused the Debian Bug report #511393, regarding ethtool: Shows that there is a link when there is none. to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 511393: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=511393 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: ethtool Version: 6+20080913-1 Hi, On one of the interfaces where there is no cable plugged in, I see: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised auto-negotiation: Yes Speed: Unknown! (0) Duplex: Half Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: g Current message level: 0x000000ff (255) Link detected: yes Notice that is says that a link is detected and the speed is 0. On the other hand, mii-tool seems to get this right: eth1: no link product info: vendor 00:08:18, model 26 rev 2 basic mode: autonegotiation enabled basic status: no link capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control Kurt
--- End Message ---
--- Begin Message ---Hi, your bug has been filed against the "linux-2.6" source package and was filed for a kernel older than the recently released Debian 7.x / Wheezy with a severity less than important. We don't have the ressources to reproduce the complete backlog of all older kernel bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy or a more recent kernel from testing or unstable, please reopen the bug by sending a mail to [email protected] with the following three commands included in the mail: reopen BUGNUMBER reassign BUGNUMBER src:linux thanks Cheers, Moritz
--- End Message ---
