Your message dated Sun, 23 Jun 2013 16:08:17 +0200 with message-id <[email protected]> and subject line Closing has caused the Debian Bug report #620278, regarding linux-image-2.6.38-2-amd64: tpm_tis failure increases boot time a llllooootttt to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 620278: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=620278 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: linux-2.6 Version: 2.6.38-2 Severity: normal Hi, there are several problems with this linux-image, either the configuration or patches as a self-compile 2.6.38-rc7 does not suffer from those problems. The boot process (until login on vt1 is possible) take >6 minutes with the Debian kernel while the self-compiled (although almost everything that's needed is compiled-in) kernel takes far less than 1 minute (never measured this). If you more information than below, just tell me. Regards, Hendrik Sattler -- Package-specific info: ** Kernel log: boot messages should be attached [ 11.177753] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input11 [ 129.448119] tpm_tis 00:0b: tpm_transmit: tpm_send: error -62 [...] Mar 31 19:31:56 yavin4 kernel: [ 360.588423] modprobe D ffff8800b7f90000 0 696 1 0x00000000 Mar 31 19:31:56 yavin4 kernel: [ 360.588434] ffff8800b7f90000 0000000000000086 ffff880000000000 ffff880036deca40 Mar 31 19:31:56 yavin4 kernel: [ 360.588447] 0000000000013700 ffff8800b8f57fd8 ffff8800b8f57fd8 0000000000013700 Mar 31 19:31:56 yavin4 kernel: [ 360.588457] ffff8800b7f90000 ffff8800b8f56010 0000000000000000 00000001b8f57dc0 Mar 31 19:31:56 yavin4 kernel: [ 360.588468] Call Trace: Mar 31 19:31:56 yavin4 kernel: [ 360.588484] [<ffffffff8132608a>] ? __mutex_lock_common+0x127/0x193 Mar 31 19:31:56 yavin4 kernel: [ 360.588505] [<ffffffff813261c2>] ? mutex_lock+0x1a/0x33 Mar 31 19:31:56 yavin4 kernel: [ 360.588515] [<ffffffff8123e4e7>] ? __driver_attach+0x2e/0x6f Mar 31 19:31:56 yavin4 kernel: [ 360.588524] [<ffffffff8123e4b9>] ? __driver_attach+0x0/0x6f Mar 31 19:31:56 yavin4 kernel: [ 360.588532] [<ffffffff8123daac>] ? bus_for_each_dev+0x44/0x78 Mar 31 19:31:56 yavin4 kernel: [ 360.588543] [<ffffffff8123df04>] ? bus_add_driver+0xa8/0x1f0 Mar 31 19:31:56 yavin4 kernel: [ 360.588552] [<ffffffff8123e7b1>] ? driver_register+0x90/0xf8 Mar 31 19:31:56 yavin4 kernel: [ 360.588568] [<ffffffffa035c358>] ? parport_pc_init+0x2a2/0xf4a [parport_pc] Mar 31 19:31:56 yavin4 kernel: [ 360.588585] [<ffffffffa035c0b6>] ? parport_pc_init+0x0/0xf4a [parport_pc] Mar 31 19:31:56 yavin4 kernel: [ 360.588594] [<ffffffff81002079>] ? do_one_initcall+0x78/0x131 Mar 31 19:31:56 yavin4 kernel: [ 360.588606] [<ffffffff81075e1a>] ? sys_init_module+0xd3/0x221 Mar 31 19:31:56 yavin4 kernel: [ 360.588614] [<ffffffff81009952>] ? system_call_fastpath+0x16/0x1b ** Model information sys_vendor: Acer product_name: TravelMate 6592 product_version: PSMBOU-1234567 chassis_vendor: Acer chassis_version: N/A bios_vendor: Acer bios_version: V1.41 board_vendor: Acer board_name: TravelMate 6592 board_version: Not Applicable ** PNP information 00:0a PNP0401 ECP printer port state = disabled possible resources: Dependent: 00 - Priority acceptable port 0x378-0x378, align 0x0, size 0x8, 16-bit address decoding port 0x778-0x778, align 0x0, size 0x8, 16-bit address decoding irq 5,7 High-Edge dma 1,3 8-bit compatible Dependent: 01 - Priority acceptable port 0x278-0x278, align 0x0, size 0x8, 16-bit address decoding port 0x678-0x678, align 0x0, size 0x8, 16-bit address decoding irq 5,7 High-Edge dma 1,3 8-bit compatible Dependent: 02 - Priority acceptable port 0x3bc-0x3bc, align 0x0, size 0x4, 16-bit address decoding port 0x7bc-0x7bc, align 0x0, size 0x4, 16-bit address decoding irq 5,7 High-Edge dma 1,3 8-bit compatible 00:0b IFX0102 Infineon Trusted Platform Module state = active allocated resources: mem 0xfed40000-0xfed44fff io 0x4e-0x4f io 0x1670-0x167f irq 11 compatible devices: PNP0c31 (unknown) -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-rc7 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.38-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 3 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.38-2-amd64 recommends: pn firmware-linux-free <none> (no description available) Versions of packages linux-image-2.6.38-2-amd64 suggests: ii grub-pc 1.99~rc1-8 GRand Unified Bootloader, version ii linux-doc-2.6.38 2.6.38-2 Linux kernel specific documentatio Versions of packages linux-image-2.6.38-2-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) ii firmware-iwlwifi 0.29 Binary firmware for Intel Wireless pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.29 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64: linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64: linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
--- End Message ---
--- Begin Message ---Hi, your bug has been filed against the "linux-2.6" source package and was filed for a kernel older than the recently released Debian 7.x / Wheezy with a severity less than important. We don't have the ressources to reproduce the complete backlog of all older kernel bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy or a more recent kernel from testing or unstable, please reopen the bug by sending a mail to [email protected] with the following three commands included in the mail: reopen BUGNUMBER reassign BUGNUMBER src:linux thanks Cheers, Moritz
--- End Message ---
