Your message dated Fri, 17 Jan 2014 09:37:31 +0000
with message-id <[email protected]>
and subject line Bug#734283: fixed in openrc 0.12.4+20131230-4
has caused the Debian Bug report #734283,
regarding openrc: missing dependency on insserv (causes endless loops at
shutdown and read-only root fs at boot)
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
734283: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=734283
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: openrc
Severity: important
Version: 0.12.4+20131230-3
Hi,
[Writing this report from another machine, hence no meta data at the
end]
I've installed a Xen DomU with xen-tools 4.4 and "xen-create-image
--dist sid --dhcp --pygrub --noaccounts --role minimal [some
host-specific parameters like disk size, memory size, hostname and
mirror settings]".
"--role minimal" causes (beyond other things I wanted) busybox-syslogd
instead of rsyslog to be installed.
On the machine I then installed openrc, called the command being told
while openrc was set up (c.f. http://thomas.goirand.fr/blog/?p=153). It
only seemed to shutdown busybox-syslogd and then rebooted the box.
ssh didn't come up on boot, so I started it manually. Then I replaced
busybox-syslogd with rsyslog to get persistent syslogs.
apt-get suggested to remove insserv, as it was installed automatically,
so I purged it.
Then I tried to reboot the virtual machine with "reboot".
While the ssh session where I typed "reboot" is still there, hence, the
system hasn't rebooted yet, I endlessly get the following messages on
the console, despite they rather look like bootup sequence than a
shutdown sequence (don't know where the start of the loop is, so I took
a random line as start):
[…]
[ ok ] Cleaning up temporary files....
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /lib/rc/sh/gendepends.sh start|stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /etc/init.d/networking {start|stop|reload|restart|force-reload}
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /etc/init.d/procps {start|stop|restart|reload|force-reload|status}
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
* Caching service dependencies ...
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
/lib/rc/sh/gendepends.sh: 91: /lib/rc/sh/gendepends.sh: shell_var: not found
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
/lib/rc/sh/gendepends.sh: 91: /lib/rc/sh/gendepends.sh: shell_var: not found
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
done.
/lib/rc/sh/gendepends.sh: 91: /lib/rc/sh/gendepends.sh: shell_var: not found
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Cleaning up temporary files... /tmp /run /run/lock /run/shm.
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Activating swap...done.
mount: you must specify the filesystem type
[FAIL] Cannot check root file system because it is not mounted read-only. ...
failed!
[ 2552.694335] EXT4-fs (xvda2): re-mounted. Opts: errors=remount-ro
/lib/rc/sh/gendepends.sh: 91: /lib/rc/sh/gendepends.sh: shell_var: not found
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[info] Usage: /etc/init.d/cron {start|stop|status|restart|reload|force-reload}.
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /lib/rc/sh/gendepends.sh start|stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Usage: hwclock.sh {start|stop|reload|force-reload|show}.
[ ok ] start sets kernel (system) clock from hardware (RTC) clock.
[ ok ] stop and reload set hardware (RTC) clock from kernel (system) clock.
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /lib/rc/sh/gendepends.sh start|stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Usage: /lib/rc/sh/gendepends.sh start.
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
/lib/rc/sh/gendepends.sh: 91: /lib/rc/sh/gendepends.sh: shell_var: not found
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Cleaning up temporary files....
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
/lib/rc/sh/gendepends.sh: 91: /lib/rc/sh/gendepends.sh: shell_var: not found
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Warning: mountdevsubfs should be called with the 'start' argument.
/lib/rc/sh/gendepends.sh: 91: /lib/rc/sh/gendepends.sh: shell_var: not found
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Warning: mountkernfs should be called with the 'start' argument.
/lib/rc/sh/gendepends.sh: 91: /lib/rc/sh/gendepends.sh: shell_var: not found
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Cleaning up temporary files....
[…]
At least the following line suggests that there may be a hard dependency
on insserv missing:
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
On the still open SSH session I then installed insserv again, and it
switched to the following endless loop (again looking like a bootup):
[…]
[ ok ] Cleaning up temporary files... /tmp /run /run/lock /run/shm.
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Activating swap...done.
mount: you must specify the filesystem type
[FAIL] Cannot check root file system because it is not mounted read-only. ...
failed!
[ 2775.698468] EXT4-fs (xvda2): re-mounted. Opts: errors=remount-ro
/lib/rc/sh/gendepends.sh: 91: /lib/rc/sh/gendepends.sh: shell_var: not found
Service `mountall.sh' needs non existent service `checkfs'
Service `mountall.sh' needs non existent service `checkroot-bootclean'
[ ok ]
[ ok ] Cleaning up temporary files....
[ ok ] Cleaning up temporary files....
[ ok ] Starting enhanced syslogd: rsyslogd.
[ ok ] Starting periodic command scheduler: cron.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
Service `rsyslog' needs non existent service `hwclock'
Service `single' needs non existent service `killprocs'
Service `udev' needs non existent service `mountkernfs'
Service `urandom' needs non existent service `hwclock'
[ ok ]
[info] Saving the system clock.
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --debug option to see the details of our search for an access
method.
Service `rsyslog' needs non existent service `hwclock'
Service `single' needs non existent service `killprocs'
Service `udev' needs non existent service `mountkernfs'
Service `urandom' needs non existent service `hwclock'
[ ok ]
Service `rsyslog' needs non existent service `hwclock'
Service `single' needs non existent service `killprocs'
Service `udev' needs non existent service `mountkernfs'
Service `urandom' needs non existent service `hwclock'
[ ok ]
Service `rsyslog' needs non existent service `hwclock'
Service `single' needs non existent service `killprocs'
Service `udev' needs non existent service `mountkernfs'
Service `urandom' needs non existent service `hwclock'
[ ok ]
Service `rsyslog' needs non existent service `hwclock'
Service `single' needs non existent service `killprocs'
Service `udev' needs non existent service `mountkernfs'
Service `urandom' needs non existent service `hwclock'
[ ok ]
[…]
I then did a "reboot -f" and the virtual machine seemed to come up clean
again, all services running as expected.
I logged in via SSH, typed "reboot" again and the machine rebooted fine
again, except that my SSH session was not killed (at least not before
the network of the virtual machine was down).
Then I removed insserv again and typed "reboot". This time everything
looked different and there were quite some error messages on the
console, but no more loops:
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /lib/rc/sh/runscript.sh start|stop
* ERROR: rc.local failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /lib/rc/sh/runscript.sh start|stop
* ERROR: rmnologin failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[info] Usage: /etc/init.d/ssh
{start|stop|reload|force-reload|restart|try-restart|status}.
* ERROR: ssh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: motd [start|stop|status]
* ERROR: motd failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Usage: /lib/rc/sh/runscript.sh start.
* ERROR: kmod failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[info] Usage: /etc/init.d/cron {start|stop|status|restart|reload|force-reload}.
* ERROR: cron failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /etc/init.d/rsyslog {start|stop|rotate|restart|force-reload|status}
* ERROR: rsyslog failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: bootmisc.sh [start|stop]
* ERROR: bootmisc.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: mountnfs-bootclean.sh [start|stop]
* ERROR: mountnfs-bootclean.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /lib/rc/sh/runscript.sh start|stop
* ERROR: mountnfs.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /etc/init.d/networking {start|stop|reload|restart|force-reload}
* ERROR: networking failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /etc/init.d/procps {start|stop|restart|reload|force-reload|status}
* ERROR: procps failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: urandom start|stop
* ERROR: urandom failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: bootlogs [start|stop|status]
* ERROR: bootlogs failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: mountall-bootclean.sh [start|stop]
* ERROR: mountall-bootclean.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: mountall.sh [start|stop]
* ERROR: mountall.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: checkroot-bootclean.sh [start|stop]
* ERROR: checkroot-bootclean.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: checkfs.sh [start|stop]
* ERROR: checkfs.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: checkroot.sh [start|stop]
* ERROR: checkroot.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Usage: hwclock.sh {start|stop|reload|force-reload|show}.
[ ok ] start sets kernel (system) clock from hardware (RTC) clock.
[ ok ] stop and reload set hardware (RTC) clock from kernel (system) clock.
* hwclock.sh: error loading /etc/init.d/hwclock.sh
* ERROR: hwclock.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: mountdevsubfs [start|stop]
* ERROR: mountdevsubfs.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /etc/init.d/udev {start|stop|restart|reload|force-reload|status}
* ERROR: udev failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: mountkernfs [start|stop]
* ERROR: mountkernfs.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: hostname.sh [start|stop]
* ERROR: hostname.sh failed to stop
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
* Saving dependency cache ...
[ ok ]
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
* reboot runlevel... ...
[info] Will now restart.
[ 155.294508] reboot: Restarting system
Not sure what made that difference now.
On bootup I got these error messages:
INIT: version 2.88 booting
OpenRC 0.13 is starting up Linux 3.12-1-amd64 (x86_64) [XENU]
* /proc is already mounted
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: mountkernfs [start|stop]
* ERROR: mountkernfs.sh failed to start
* ERROR: cannot start udev as mountkernfs.sh would not start
* ERROR: cannot start mountdevsubfs.sh as mountkernfs.sh would not start
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: hostname.sh [start|stop]
* ERROR: hostname.sh failed to start
* ERROR: cannot start checkroot.sh as mountkernfs.sh would not start
* ERROR: cannot start checkfs.sh as mountkernfs.sh would not start
* ERROR: cannot start checkroot-bootclean.sh as mountkernfs.sh would not start
* ERROR: cannot start mountall.sh as mountkernfs.sh would not start
* ERROR: cannot start mountall-bootclean.sh as mountkernfs.sh would not start
* ERROR: cannot start hwclock.sh as mountkernfs.sh would not start
* ERROR: cannot start urandom as mountkernfs.sh would not start
* ERROR: cannot start procps as mountkernfs.sh would not start
* ERROR: cannot start networking as mountkernfs.sh would not start
* ERROR: cannot start mountnfs.sh as mountkernfs.sh would not start
* ERROR: cannot start mountnfs-bootclean.sh as mountkernfs.sh would not start
* ERROR: cannot start bootmisc.sh as mountkernfs.sh would not start
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
[ ok ] Usage: /lib/rc/sh/runscript.sh start.
* ERROR: kmod failed to start
* ERROR: cannot start nviboot as mountkernfs.sh would not start
INIT: Entering runlevel: 2
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: hostname.sh [start|stop]
* ERROR: hostname.sh failed to start
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: mountall-bootclean.sh [start|stop]
* ERROR: mountall-bootclean.sh failed to start
* ERROR: cannot start bootlogs as hostname.sh would not start
* ERROR: cannot start mountnfs-bootclean.sh as mountall-bootclean.sh would not
start
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: mountkernfs [start|stop]
* ERROR: mountkernfs.sh failed to start
* ERROR: cannot start mountdevsubfs.sh as mountkernfs.sh would not start
* ERROR: cannot start hwclock.sh as mountkernfs.sh would not start
* ERROR: cannot start rsyslog as mountall-bootclean.sh would not start
* ERROR: cannot start cron as mountall-bootclean.sh would not start
* ERROR: cannot start motd as hostname.sh would not start
* ERROR: cannot start ssh as mountall-bootclean.sh would not start
* ERROR: cannot start rmnologin as mountall-bootclean.sh would not start
error: unable to read /etc/insserv.conf at /lib/rc/bin/lsb.pl line 19.
Usage: /lib/rc/sh/runscript.sh start|stop
* ERROR: rc.local failed to start
The login screen was then missing the hostname:
Debian GNU/Linux jessie/sid (none) hvc0
(none) login:
The machine came up without network and a read-only root file system:
root@(none):~# dhclient eth0
/sbin/dhclient-script: line 26: /etc/resolv.conf.dhclient-new: Read-only file
system
/sbin/dhclient-script: line 42: /etc/resolv.conf.dhclient-new: Read-only file
system
/sbin/dhclient-script: line 49: /etc/resolv.conf.dhclient-new: Read-only file
system
/sbin/dhclient-script: line 49: /etc/resolv.conf.dhclient-new: Read-only file
system
/sbin/dhclient-script: line 49: /etc/resolv.conf.dhclient-new: Read-only file
system
chown: cannot access '/etc/resolv.conf.dhclient-new': No such file or directory
chmod: cannot access '/etc/resolv.conf.dhclient-new': No such file or directory
mv: cannot stat '/etc/resolv.conf.dhclient-new': No such file or directory
root@(none):~#
What helped again (after network was working again) was:
# mount -o remount,rw /
# apt-get install insserv
# reboot
The machine came up fine again.
--- End Message ---
--- Begin Message ---
Source: openrc
Source-Version: 0.12.4+20131230-4
We believe that the bug you reported is fixed in the latest version of
openrc, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Thomas Goirand <[email protected]> (supplier of updated openrc package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Fri, 17 Jan 2014 07:01:23 +0000
Source: openrc
Binary: openrc openrc-dbg librc1 librc-dev libeinfo1 libeinfo-dev
Architecture: source amd64
Version: 0.12.4+20131230-4
Distribution: experimental
Urgency: medium
Maintainer: Roger Leigh <[email protected]>
Changed-By: Thomas Goirand <[email protected]>
Description:
libeinfo-dev - dependency based init system (pretty control display
development)
libeinfo1 - dependency based init system (pretty console display library)
librc-dev - dependency based init system (runtime development)
librc1 - dependency based init system (runtime library)
openrc - dependency based init system (runlevel change mechanism)
openrc-dbg - dependency based init system (runlevel change mechanism) - debug
Closes: 734283 734406
Changes:
openrc (0.12.4+20131230-4) experimental; urgency=medium
.
[ Benda Xu ]
* Add myself to the uploaders field.
* rc-update: Add the feature of removing a service from all runlevels.
update-rc.d: make use of the new rc-update feature.
* Rename "single" runlevel to "recovery".
OpenRC treats single runlevel specially.
.
[ Thomas Goirand ]
* Added etc/rc.conf.GNU and mk/os-GNU.mk to have a chance to be able to build
under GNU Hurd.
* Patches librc.h so that it works for Hurd.
* Added missing dependency on insserv (Closes: 734283). Thanks to Axel
Beckert <[email protected]> for finding this out and his bug report.
* Now conflicts with file-rc (Closes: #734406), thanks to Michael Gilbert
<[email protected]> for reporting the problem.
Checksums-Sha1:
529e09081f3d4540430ca354529537c08b255e2e 2160 openrc_0.12.4+20131230-4.dsc
fa0ea1c97c454312fa8fec5f46c36beedc6a1cc5 18413
openrc_0.12.4+20131230-4.debian.tar.gz
036001c7fb3fd8289e33253144a953c20c8b1d98 83096
openrc_0.12.4+20131230-4_amd64.deb
d2de3d0dd8e689a94847164bde4fe4bf0051b994 196688
openrc-dbg_0.12.4+20131230-4_amd64.deb
71eb6d8d5c8d1391f448779c5bf105136420c285 22942
librc1_0.12.4+20131230-4_amd64.deb
3fbca936ef62b9a443b6a1029a1db1ac095c5e31 19714
librc-dev_0.12.4+20131230-4_amd64.deb
7131e83ad88d0a041b7cbd93d86c09da81a95f12 10656
libeinfo1_0.12.4+20131230-4_amd64.deb
48f524a5f1f13be09a6ab7190391ebfa0e67608e 7746
libeinfo-dev_0.12.4+20131230-4_amd64.deb
Checksums-Sha256:
224527c1eb7d867000a29a30b1a0872314822973aec454b58a12a3bed1621599 2160
openrc_0.12.4+20131230-4.dsc
94d08b8928822250ec24490ead52f89596513f7fd775f03a4906cf7fc200333d 18413
openrc_0.12.4+20131230-4.debian.tar.gz
f1ca355e330e444b737297efcdb85cacc09507d62975a504d57674d5d6f86ae7 83096
openrc_0.12.4+20131230-4_amd64.deb
a01b3d1c2dbb7b75305433eb61eead1bcf087cb0f1942924f3fee8d3d5929e24 196688
openrc-dbg_0.12.4+20131230-4_amd64.deb
6fa92b8bfc7787532b313be8730d52c31e106df320cc75d1aa49e5f2eba75d53 22942
librc1_0.12.4+20131230-4_amd64.deb
37060e6ab05186b96ca1073b66b484cc929ba45224b6f14387d1699a48fac894 19714
librc-dev_0.12.4+20131230-4_amd64.deb
7c8c39c0451ab7e3d471ade933544b54cc44c9ddf2ba2eab7bcd8f4be7fafc42 10656
libeinfo1_0.12.4+20131230-4_amd64.deb
f4afd05b92616a6d4de26e8e42b1848699a2618e6a3eca183b41614f214aa30e 7746
libeinfo-dev_0.12.4+20131230-4_amd64.deb
Files:
1fc9b4cb1cbb20627535deabb9938548 2160 admin extra openrc_0.12.4+20131230-4.dsc
66928010731d59db0d8408988936fcd9 18413 admin extra
openrc_0.12.4+20131230-4.debian.tar.gz
b2ec8f4ce850e33ad6d741c5655e54c3 83096 admin extra
openrc_0.12.4+20131230-4_amd64.deb
8f7d1c488fc25904ccbe5db4a955efe8 196688 debug extra
openrc-dbg_0.12.4+20131230-4_amd64.deb
26b5c211df7996edefe808af88c1e357 22942 admin extra
librc1_0.12.4+20131230-4_amd64.deb
3f88f75648b80fae472fbe3c77723da4 19714 libdevel extra
librc-dev_0.12.4+20131230-4_amd64.deb
df7010f8715ca34624ecd4bde033bf64 10656 admin extra
libeinfo1_0.12.4+20131230-4_amd64.deb
f0090b56968abed6471920c8886e8423 7746 libdevel extra
libeinfo-dev_0.12.4+20131230-4_amd64.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8BrO
-----END PGP SIGNATURE-----
--- End Message ---
