Your message dated Tue, 20 May 2014 06:49:04 +0000 with message-id <[email protected]> and subject line Bug#747713: Removed package(s) from unstable has caused the Debian Bug report #497358, regarding hal-info: wrong quirks for pm-suspend on thinkpad x40 to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 497358: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=497358 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: hal-info Version: 20080508+git20080601-1 Severity: normal My Thinkpad X40 will not suspend if I just run pm-suspend as root. It comes back to a screen without the backlight on--I can fix this by blindly typing "su root -c 'vbetool post'" and then switching to a virtual terminal and back to X. This problem is also fixed by calling "pm-suspend --quirk-s3-bios." The problem lies in /usr/share/hal/fdi/information/10freedesktop/20-video-quirk-pm-ibm.fdi This file has two entries for the Thinkpad X40: <!-- R50p, R52, X41t, X40, T30, T41p, T41p, T42, X40, Z60t, X41, Z60m, T32 (2647) --> <match key="system.hardware.product" prefix_outof="1832;1860;1869;2371;2373;2374;2376;2382;2386;2511;2513;2525;2526;2529;2530;2647"> <merge key="power_management.quirk.s3_bios" type="bool">true</merge> <merge key="power_management.quirk.s3_mode" type="bool">true</merge> </match> .... <!-- need no quirks: a X40, T40 --> <match key="system.hardware.version" string="ThinkPad X40"> <match key="system.firmware.version" prefix="1UETD2WW"> <merge key="power_management.quirk.none" type="bool">true</merge> </match> </match> The problem is that my machine is matching the second rule for an X40, not the first. If I change the second rule to use the key="power_management.quirk.s3_bios", then my machine suspends fine. I have attached lspci -nnvv if you need anything else just ask. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- no debconf information00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02) Subsystem: IBM Device [1014:055c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at <unassigned> (32-bit, prefetchable) Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02) Subsystem: IBM Device [1014:055d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02) Subsystem: IBM Device [1014:055e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) Subsystem: IBM Device [1014:0557] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at 1800 [size=8] Capabilities: <access denied> Kernel modules: intelfb 00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) Subsystem: IBM Device [1014:0557] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at e8000000 (32-bit, prefetchable) [disabled] [size=128M] Region 1: Memory at d0080000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: <access denied> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) Subsystem: IBM Device [1014:052d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) Subsystem: IBM Device [1014:052d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) Subsystem: IBM Device [1014:052d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20) Subsystem: IBM Device [1014:052e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=05, sec-latency=64 I/O behind bridge: 00003000-00007fff Memory behind bridge: d0200000-dfffffff Prefetchable memory behind bridge: f0000000-f7ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: IBM Device [1014:052d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01) Subsystem: IBM Device [1014:052d] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01) Subsystem: IBM Device [1014:0558] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) Subsystem: IBM Device [1014:0559] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH Modem Kernel modules: snd-intel8x0m 02:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 8d) Subsystem: IBM Device [1014:0555] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=04, sec-latency=176 Memory window 0: f0000000-f3fff000 (prefetchable) Memory window 1: d4000000-d7fff000 I/O window 0: 00003000-000030ff I/O window 1: 00003400-000034ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 02:00.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 13) Subsystem: IBM Device [1014:0556] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin B routed to IRQ 17 Region 0: Memory at d0221000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci Kernel modules: sdhci 02:01.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit Ethernet Controller [8086:1077] Subsystem: IBM Device [1014:055b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 7000 [size=64] Capabilities: <access denied> Kernel driver in use: e1000 Kernel modules: e1000 02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05) Subsystem: Intel Corporation Device [8086:2711] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at d0220000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 Kernel modules: ipw2200
--- End Message ---
--- Begin Message ---Version: 20091130-1+rm Dear submitter, as the package hal-info has just been removed from the Debian archive unstable we hereby close the associated bug reports. We are sorry that we couldn't deal with your issue properly. For details on the removal, please see https://bugs.debian.org/747713 The version of this package that was in Debian prior to this removal can still be found using http://snapshot.debian.org/. This message was generated automatically; if you believe that there is a problem with it please contact the archive administrators by mailing [email protected]. Debian distribution maintenance software pp. Ansgar Burchardt (the ftpmaster behind the curtain)
--- End Message ---
