Your message dated Sun, 07 Feb 2016 22:43:07 +0000 with message-id <E1aSY2t-0006Cy-C3@deadeye> and subject line Closing bugs assigned to linux-2.6 package has caused the Debian Bug report #556433, regarding linux-image-2.6.30-2-486: 3c59x: NETDEV WATCHDOG: transmit timed out to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 556433: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=556433 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: linux-image-2.6.30-bpo.2-486 Version: 2.6.30-8~bpo50+1 Severity: critical Under heavy network usage (i.e. viewing photos served via sshfs to another PC), Dell Latitude CP M233ST laptop running as home fileserver, network stops functioning. I have to reboot to get the network working again. I read that the IRQ handling was changed, and it was suggested to try one of the newest kernels. I used the linux-image-2.6.26-2-486 initially. Then I tried an experimental build-image kernel (linux-image-2.6.30-1-486) and backports kernel (linux-image-2.6.30-2-486) and although less frequent, the NETDEV WATCHDOG still occurs under heavy usage. The /var/log/messages file shows the following: Nov 15 19:45:20 samuel kernel: [31020.000091] ------------[ cut here ]------------ Nov 15 19:45:20 samuel kernel: [31020.000194] WARNING: at /build/buildd/linux-2.6-2.6.30/debian/build/source_i386_none/net/sched/sch_generic.c:226 dev_watchdog+0xc8/0x14a() Nov 15 19:45:20 samuel kernel: [31020.000239] Hardware name: Latitude CP M233ST Nov 15 19:45:20 samuel kernel: [31020.000266] NETDEV WATCHDOG: eth0 (3c59x): transmit timed out Nov 15 19:45:20 samuel kernel: [31020.000290] Modules linked in: rfcomm l2cap bluetooth nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs cpufreq_conservative cpufreq_stats cpufreq_userspace cpufreq_powersave nls_utf8 cifs nls_base loop joydev 3c59x mii dcdbas pcmcia snd_wavefront parport_pc video parport output snd_cs4236 snd_wss_lib snd_opl3_lib snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device button battery ac processor snd_pcm snd_timer snd soundcore snd_page_alloc psmouse i2c_piix4 yenta_socket evdev serio_raw i2c_core pcspkr rsrc_nonstatic pcmcia_core sd_mod crc_t10dif ext3 jbd mbcache usb_storage ide_cd_mod cdrom ide_gd_mod ata_generic libata floppy scsi_mod uhci_hcd piix ide_pci_generic usbcore ide_core thermal fan thermal_sys Nov 15 19:45:20 samuel kernel: [31020.000774] Pid: 0, comm: swapper Not tainted 2.6.30-bpo.2-486 #1 Nov 15 19:45:20 samuel kernel: [31020.000801] Call Trace: Nov 15 19:45:20 samuel kernel: [31020.000871] [<c011e7e0>] ? warn_slowpath_common+0x5e/0x8a Nov 15 19:45:20 samuel kernel: [31020.000915] [<c0293109>] ? dev_watchdog+0x0/0x14a Nov 15 19:45:20 samuel kernel: [31020.000957] [<c011e83e>] ? warn_slowpath_fmt+0x26/0x2a Nov 15 19:45:20 samuel kernel: [31020.000997] [<c02931d1>] ? dev_watchdog+0xc8/0x14a Nov 15 19:45:20 samuel kernel: [31020.001067] [<c0134f58>] ? clockevents_program_event+0xbd/0xcb Nov 15 19:45:20 samuel kernel: [31020.001113] [<c0135b5f>] ? tick_dev_program_event+0x1e/0x80 Nov 15 19:45:20 samuel kernel: [31020.001172] [<c012503c>] ? run_timer_softirq+0x12e/0x180 Nov 15 19:45:20 samuel kernel: [31020.001212] [<c0293109>] ? dev_watchdog+0x0/0x14a Nov 15 19:45:20 samuel kernel: [31020.001252] [<c0122167>] ? __do_softirq+0x82/0x125 Nov 15 19:45:20 samuel kernel: [31020.001288] [<c0122237>] ? do_softirq+0x2d/0x37 Nov 15 19:45:20 samuel kernel: [31020.001324] [<c01222fa>] ? irq_exit+0x25/0x4e Nov 15 19:45:20 samuel kernel: [31020.001383] [<c0104614>] ? do_IRQ+0x53/0x63 Nov 15 19:45:20 samuel kernel: [31020.001422] [<c0103609>] ? common_interrupt+0x29/0x30 Nov 15 19:45:20 samuel kernel: [31020.001573] [<c8be5dd4>] ? acpi_idle_enter_simple+0xf7/0x12d [processor] Nov 15 19:45:20 samuel kernel: [31020.001630] [<c02685be>] ? cpuidle_idle_call+0x54/0x86 Nov 15 19:45:20 samuel kernel: [31020.001672] [<c0102337>] ? cpu_idle+0x28/0x41 Nov 15 19:45:20 samuel kernel: [31020.001722] [<c0400925>] ? start_kernel+0x291/0x294 Nov 15 19:45:20 samuel kernel: [31020.001751] ---[ end trace 755026cb02bd5b9d ]--- -- Package-specific info: ** Version: Linux version 2.6.30-bpo.2-486 (Debian 2.6.30-8~bpo50+1) ([email protected]) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Wed Oct 28 14:04:17 UTC 2009 ** Command line: root=/dev/hda1 ro quiet ** Not tainted ** Kernel log: [ 20.428432] hda1 hda2 < hda5 > [ 20.639151] ide-cd: hdc: ATAPI 24X DVD-ROM drive, 512kB Cache [ 20.639203] Uniform CD-ROM driver Revision: 3.20 [ 20.754018] Initializing USB Mass Storage driver... [ 20.822612] scsi0 : SCSI emulation for USB Mass Storage devices [ 20.828512] usbcore: registered new interface driver usb-storage [ 20.828561] USB Mass Storage support registered. [ 20.839367] usb-storage: device found at 3 [ 20.839394] usb-storage: waiting for device to settle before scanning [ 21.588732] PM: Starting manual resume from disk [ 21.942530] kjournald starting. Commit interval 5 seconds [ 21.942646] EXT3-fs: mounted filesystem with ordered data mode. [ 25.848745] usb-storage: device scan complete [ 25.854859] scsi 0:0:0:0: Direct-Access Seagate FreeAgent Go 102D PQ: 0 ANSI: 4 [ 28.061287] udevd version 125 started [ 45.231793] Driver 'sd' needs updating - please use bus_type methods [ 45.411708] yenta_cardbus 0000:00:03.0: CardBus bridge found [1028:0075] [ 48.266127] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 48.272564] sd 0:0:0:0: [sda] Write Protect is off [ 48.272705] sd 0:0:0:0: [sda] Mode Sense: 1c 00 00 00 [ 48.272824] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 48.288490] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 48.289256] sda: sda1 sda2 sda3 [ 48.331234] sd 0:0:0:0: [sda] Attached SCSI disk [ 48.472829] yenta_cardbus 0000:00:03.0: ISA IRQ mask 0x0418, PCI irq 11 [ 48.472868] yenta_cardbus 0000:00:03.0: Socket status: 30000006 [ 48.473920] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x840, revision 0 [ 48.474758] yenta_cardbus 0000:00:03.1: CardBus bridge found [1028:0075] [ 48.600832] yenta_cardbus 0000:00:03.1: ISA IRQ mask 0x0418, PCI irq 11 [ 48.600870] yenta_cardbus 0000:00:03.1: Socket status: 30000020 [ 49.034074] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 49.276155] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1 [ 49.276314] pci 0000:05:00.0: reg 10 io port: [0x00-0xff] [ 49.276357] pci 0000:05:00.0: reg 14 32bit mmio: [0x000000-0x00007f] [ 49.276402] pci 0000:05:00.0: reg 18 32bit mmio: [0x000000-0x00007f] [ 49.276465] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 49.276554] pci 0000:05:00.0: supports D1 D2 [ 49.276586] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 49.276621] pci 0000:05:00.0: PME# disabled [ 53.048806] Marking TSC unstable due to TSC halts in idle [ 53.049442] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 53.049789] processor ACPI_CPU:00: registered as cooling_device0 [ 53.245875] Synaptics Touchpad, model: 1, fw: 4.2, id: 0x844a1, caps: 0x0/0x0 [ 53.307996] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 [ 54.762514] ACPI: AC Adapter [AC] (on-line) [ 58.383675] ACPI: Battery Slot [BAT0] (battery present) [ 58.420616] ACPI: Battery Slot [BAT1] (battery absent) [ 59.103541] Error: Driver 'pcspkr' is already registered, aborting... [ 71.571110] parport_pc 00:0e: reported by Plug and Play ACPI [ 71.571243] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 73.131848] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0c/input/input3 [ 73.132426] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 73.438284] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 73.569586] ACPI: Lid Switch [LID] [ 73.570549] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 73.571000] ACPI: Power Button [PBTN] [ 73.571854] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6 [ 73.572390] ACPI: Sleep Button [SBTN] [ 83.560179] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 83.608398] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 83.610070] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 83.611377] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 83.612747] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 83.616620] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 83.634631] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 83.636433] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean. [ 83.637679] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 83.638813] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 83.642684] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 90.354882] 3c59x 0000:05:00.0: enabling device (0000 -> 0003) [ 90.354966] 3c59x 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 90.355132] 3c59x: Donald Becker and others. [ 90.355209] 0000:05:00.0: 3Com PCI 3CCFE575CT Tornado CardBus at c8d52000. [ 90.355261] 3c59x 0000:05:00.0: setting latency timer to 64 [ 99.330141] Adding 232900k swap on /dev/hda5. Priority:-1 extents:1 across:232900k [ 100.392816] EXT3 FS on hda1, internal journal [ 103.122793] loop: module loaded [ 105.376740] kjournald starting. Commit interval 5 seconds [ 105.394145] EXT3 FS on sda3, internal journal [ 105.394390] EXT3-fs: mounted filesystem with ordered data mode. [ 110.334706] eth0: setting full-duplex. [ 114.059651] CIFS VFS: Error connecting to socket. Aborting operation [ 114.059805] CIFS VFS: cifs_mount failed w/return code = -111 [ 120.992188] eth0: no IPv6 routers present [ 130.082065] RPC: Registered udp transport module. [ 130.082097] RPC: Registered tcp transport module. [ 130.520333] Installing knfsd (copyright (C) 1996 [email protected]). [ 130.973535] svc: failed to register lockdv1 RPC service (errno 97). [ 130.985644] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 130.996999] NFSD: starting 90-second grace period [ 139.997203] Bluetooth: Core ver 2.15 [ 140.069940] NET: Registered protocol family 31 [ 140.069966] Bluetooth: HCI device and connection manager initialized [ 140.070002] Bluetooth: HCI socket layer initialized [ 140.291305] Bluetooth: L2CAP ver 2.13 [ 140.291331] Bluetooth: L2CAP socket layer initialized [ 140.508260] Bluetooth: RFCOMM socket layer initialized [ 140.508363] Bluetooth: RFCOMM TTY layer initialized [ 140.508389] Bluetooth: RFCOMM ver 1.11 [ 141.640978] warning: `ntpd' uses 32-bit capabilities (legacy support in use) ** Loaded modules: Module Size Used by rfcomm 29244 0 l2cap 17356 5 rfcomm bluetooth 44576 4 rfcomm,l2cap nfsd 202484 9 lockd 57300 1 nfsd nfs_acl 2600 1 nfsd auth_rpcgss 30536 1 nfsd sunrpc 158916 8 nfsd,lockd,nfs_acl,auth_rpcgss exportfs 3556 1 nfsd cpufreq_conservative 5996 0 cpufreq_stats 2820 0 cpufreq_userspace 2484 0 cpufreq_powersave 1292 0 nls_utf8 1488 0 cifs 233408 0 nls_base 6208 2 nls_utf8,cifs loop 13000 0 joydev 8444 0 3c59x 35988 0 mii 4620 1 3c59x dcdbas 6512 0 pcmcia 23160 0 button 5028 0 video 18000 0 output 2604 1 video parport_pc 22288 0 parport 30420 1 parport_pc snd_wavefront 31832 0 snd_cs4236 27180 0 snd_wss_lib 23516 2 snd_wavefront,snd_cs4236 snd_opl3_lib 9136 2 snd_wavefront,snd_cs4236 snd_hwdep 6032 2 snd_wavefront,snd_opl3_lib snd_mpu401_uart 6124 2 snd_wavefront,snd_cs4236 snd_rawmidi 18572 2 snd_wavefront,snd_mpu401_uart snd_seq_device 6124 2 snd_opl3_lib,snd_rawmidi battery 9972 0 snd_pcm 60892 2 snd_cs4236,snd_wss_lib snd_timer 17196 3 snd_wss_lib,snd_opl3_lib,snd_pcm ac 3896 0 snd 48344 10 snd_wavefront,snd_cs4236,snd_wss_lib,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer soundcore 5852 1 snd snd_page_alloc 8096 2 snd_wss_lib,snd_pcm processor 29612 1 psmouse 42444 0 pcspkr 2068 0 i2c_piix4 9168 0 evdev 7852 0 serio_raw 4480 0 i2c_core 20720 1 i2c_piix4 yenta_socket 21096 3 sd_mod 28588 2 rsrc_nonstatic 9668 1 yenta_socket crc_t10dif 1632 1 sd_mod pcmcia_core 31036 3 pcmcia,yenta_socket,rsrc_nonstatic ext3 104796 2 jbd 36580 1 ext3 mbcache 6568 1 ext3 usb_storage 48320 1 ide_cd_mod 24448 0 cdrom 30348 1 ide_cd_mod ide_gd_mod 19808 3 ata_generic 4336 0 libata 152012 1 ata_generic floppy 46140 0 scsi_mod 131968 3 sd_mod,usb_storage,libata uhci_hcd 18808 0 piix 5656 2 ide_pci_generic 3628 0 usbcore 125312 3 usb_storage,uhci_hcd ide_core 87504 4 ide_cd_mod,ide_gd_mod,piix,ide_pci_generic thermal 12572 0 fan 4048 0 thermal_sys 13084 4 video,processor,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 430TX - 82439TX MTXC [8086:7100] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 00:01.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at 0860 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:01.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at ece0 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 01) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin ? routed to IRQ 9 Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:02.0 VGA compatible controller [0300]: Neomagic Corporation NM2160 [MagicGraph 128XD] [10c8:0004] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Dell MagicGraph 128XD [1028:0075] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (4000ns min, 63750ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M] Region 1: Memory at fbe00000 (32-bit, non-prefetchable) [size=2M] Region 2: Memory at fbd00000 (32-bit, non-prefetchable) [size=1M] Kernel modules: neofb 00:03.0 CardBus bridge [0607]: Texas Instruments PCI1131 [104c:ac15] (rev 01) Subsystem: Dell Device [1028:0075] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=04, sec-latency=176 Memory window 0: 10000000-13fff000 (prefetchable) Memory window 1: 14000000-17fff000 I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 00:03.1 CardBus bridge [0607]: Texas Instruments PCI1131 [104c:ac15] (rev 01) Subsystem: Dell Device [1028:0075] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 16 bytes Interrupt: pin B routed to IRQ 11 Region 0: Memory at 20001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=05, subordinate=08, sec-latency=176 Memory window 0: 18000000-1bfff000 (prefetchable) Memory window 1: 1c000000-1ffff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 05:00.0 Ethernet controller [0200]: 3Com Corporation 3cCFE575CT CardBus [Cyclone] [10b7:5257] (rev 10) Subsystem: 3Com Corporation FE575C-3Com 10/100 LAN CardBus-Fast Ethernet [10b7:5c57] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2500ns min, 1250ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 1800 [size=256] Region 1: Memory at 1c000000 (32-bit, non-prefetchable) [size=128] Region 2: Memory at 1c000080 (32-bit, non-prefetchable) [size=128] [virtual] Expansion ROM at 18000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: 3c59x Kernel modules: 3c59x -- System Information: Debian Release: 5.0.3 APT prefers stable APT policy: (500, 'stable'), (450, 'experimental') Architecture: i386 (i586) Kernel: Linux 2.6.30-bpo.2-486 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.30-bpo.2-486 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.30-bpo.2-486 recommends no packages. Versions of packages linux-image-2.6.30-bpo.2-486 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.30 <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.30-bpo.2-486/prerm/removing-running-kernel-2.6.30-bpo.2-486: true linux-image-2.6.30-bpo.2-486/postinst/bootloader-test-error-2.6.30-bpo.2-486: linux-image-2.6.30-bpo.2-486/preinst/abort-overwrite-2.6.30-bpo.2-486: linux-image-2.6.30-bpo.2-486/postinst/depmod-error-2.6.30-bpo.2-486: false linux-image-2.6.30-bpo.2-486/prerm/would-invalidate-boot-loader-2.6.30-bpo.2-486: true linux-image-2.6.30-bpo.2-486/postinst/old-dir-initrd-link-2.6.30-bpo.2-486: true linux-image-2.6.30-bpo.2-486/postinst/old-initrd-link-2.6.30-bpo.2-486: true linux-image-2.6.30-bpo.2-486/preinst/overwriting-modules-2.6.30-bpo.2-486: true linux-image-2.6.30-bpo.2-486/preinst/failed-to-move-modules-2.6.30-bpo.2-486: linux-image-2.6.30-bpo.2-486/postinst/bootloader-error-2.6.30-bpo.2-486: linux-image-2.6.30-bpo.2-486/postinst/old-system-map-link-2.6.30-bpo.2-486: true linux-image-2.6.30-bpo.2-486/postinst/create-kimage-link-2.6.30-bpo.2-486: true linux-image-2.6.30-bpo.2-486/postinst/kimage-is-a-directory: linux-image-2.6.30-bpo.2-486/preinst/bootloader-initrd-2.6.30-bpo.2-486: true linux-image-2.6.30-bpo.2-486/preinst/lilo-initrd-2.6.30-bpo.2-486: true linux-image-2.6.30-bpo.2-486/preinst/abort-install-2.6.30-bpo.2-486: linux-image-2.6.30-bpo.2-486/preinst/elilo-initrd-2.6.30-bpo.2-486: true linux-image-2.6.30-bpo.2-486/preinst/lilo-has-ramdisk: linux-image-2.6.30-bpo.2-486/preinst/initrd-2.6.30-bpo.2-486: linux-image-2.6.30-bpo.2-486/postinst/depmod-error-initrd-2.6.30-bpo.2-486: false -- http://steve.kargs.net/
--- End Message ---
--- Begin Message ---Version: 3.4.1-1~experimental.1+rm Debian 6.0 Long Term Support has now ended, and the 'linux-2.6' source package will no longer be updated. This bug is being closed on the assumption that it does not affect the kernel versions in newer Debian releases. If you can still reproduce this bug in a newer release, please reopen the bug report and reassign it to 'src:linux' and the affected version of the package. You can find the package version for the running kernel by running: uname -v or the versions of all installed kernel packages by running: dpkg -l 'linux-image-[34]*' | grep ^.i and looking at the third column. I apologise that we weren't able to provide a specific resolution for this bug. Ben. -- Ben Hutchings - Debian developer, member of Linux kernel and LTS teams
--- End Message ---
