Your message dated Sun, 08 May 2016 11:09:06 +0100 with message-id <1462702146.3708327.601364409.6e7bf...@webmail.messagingengine.com> and subject line Re: asedriveiiie: FTBFS: install: cannot stat 'libASEDriveIIIe-USB.so': No such file or directory has caused the Debian Bug report #823426, regarding asedriveiiie: FTBFS: install: cannot stat 'libASEDriveIIIe-USB.so': No such file or directory to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 823426: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=823426 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Source: asedriveiiie Version: 3.7-5 Severity: serious Justification: fails to build from source User: [email protected] Usertags: ftbfs X-Debbugs-Cc: [email protected] Dear Maintainer, asedriveiiie fails to build from source in unstable/amd64: [..] dh_testdir dh_testroot dh_prep dh_testdir dh_testroot dh_install dh_installdocs dh_installchangelogs dh_compress dh_fixperms dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'asedriveiiie-build-deps' in '../asedriveiiie-build-deps_3.7-5_all.deb'. The package has been created. Attention, the package has been created in the current directory, not in ".." as indicated by the message above! Selecting previously unselected package asedriveiiie-build-deps. (Reading database ... 23072 files and directories currently installed.) Preparing to unpack asedriveiiie-build-deps_3.7-5_all.deb ... Unpacking asedriveiiie-build-deps (3.7-5) ... Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following additional packages will be installed: libpcsclite-dev libpcsclite1 libusb-dev pkg-config Suggested packages: pcscd The following NEW packages will be installed: libpcsclite-dev libpcsclite1 libusb-dev pkg-config 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 229 kB of archives. After this operation, 717 kB of additional disk space will be used. Get:1 http://httpredir.debian.org/debian sid/main amd64 libusb-dev amd64 2:0.1.12-29 [36.9 kB] Get:2 http://httpredir.debian.org/debian sid/main amd64 libpcsclite1 amd64 1.8.16-1 [56.2 kB] Get:3 http://httpredir.debian.org/debian sid/main amd64 libpcsclite-dev amd64 1.8.16-1 [73.1 kB] Get:4 http://httpredir.debian.org/debian sid/main amd64 pkg-config amd64 0.29-4 [62.5 kB] Fetched 229 kB in 0s (19.4 MB/s) Selecting previously unselected package libusb-dev. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 23076 files and directories currently installed.) Preparing to unpack .../libusb-dev_2%3a0.1.12-29_amd64.deb ... Unpacking libusb-dev (2:0.1.12-29) ... Selecting previously unselected package libpcsclite1:amd64. Preparing to unpack .../libpcsclite1_1.8.16-1_amd64.deb ... Unpacking libpcsclite1:amd64 (1.8.16-1) ... Selecting previously unselected package libpcsclite-dev. Preparing to unpack .../libpcsclite-dev_1.8.16-1_amd64.deb ... Unpacking libpcsclite-dev (1.8.16-1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../pkg-config_0.29-4_amd64.deb ... Unpacking pkg-config (0.29-4) ... Processing triggers for man-db (2.7.5-1) ... Processing triggers for libc-bin (2.22-7) ... Setting up libusb-dev (2:0.1.12-29) ... Setting up libpcsclite1:amd64 (1.8.16-1) ... Setting up libpcsclite-dev (1.8.16-1) ... Setting up pkg-config (0.29-4) ... Setting up asedriveiiie-build-deps (3.7-5) ... Processing triggers for libc-bin (2.22-7) ... dpkg-buildpackage -rfakeroot -D -us -uc -b dpkg-buildpackage: info: source package asedriveiiie dpkg-buildpackage: info: source version 3.7-5 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Ludovic Rousseau <[email protected]> dpkg-source --before-build asedriveiiie-3.7 dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp touch asedriveiiie-usb/Makefile.inc /usr/bin/make -C asedriveiiie-usb clean make[1]: Entering directory '/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/asedriveiiie-usb' rm -f *~ *.o *.so || true make[1]: Leaving directory '/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/asedriveiiie-usb' touch asedriveiiie-serial/Makefile.inc /usr/bin/make -C asedriveiiie-serial clean make[1]: Entering directory '/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/asedriveiiie-serial' rm -f *~ *.o *.so || true rm etc/reader.conf || true rm: cannot remove 'etc/reader.conf': No such file or directory make[1]: Leaving directory '/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/asedriveiiie-serial' dh_clean debian/rules build dh_testdir cd asedriveiiie-usb ; ./configure cd asedriveiiie-serial ; ./configure touch configure-stamp dh_testdir CFLAGS="-g -O2 -fstack-protector-strong -Wformat -Werror=format-security -g -O2" /usr/bin/make -C asedriveiiie-usb make[1]: Entering directory '/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/asedriveiiie-usb' gcc -o libASEDriveIIIe-USB.so usb.c atr.c DriverIO.c CommandTypes.c ReaderCommands.c T1Protocol.c MemoryCards.c InitCardParams.c ifdhandler.c -fPIC -D_REENTRANT -DIFDHANDLERv2 -Wall -I. -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -pthread -I/usr/include/PCSC -Wl,-z,relro -lusb -shared InitCardParams.c: In function 'MatchReaderParams': InitCardParams.c:52:9: warning: variable 'F' set but not used [-Wunused-but-set-variable] int F, D, WWT; ^ ifdhandler.c: In function 'closeDriver': ifdhandler.c:30:9: warning: variable 'retVal' set but not used [-Wunused-but-set-variable] int retVal, i, readerNum = (Lun & 0xFFFF0000) >> 16; ^ /usr/bin/ld: cannot find /lib/ /usr/bin/ld: cannot find s/libusb-0.1.so.4.4.4 collect2: error: ld returned 1 exit status %Makefile:13: recipe for target 'libASEDriveIIIe-USB.so' failed make[1]: [libASEDriveIIIe-USB.so] Error 1 (ignored) make[1]: Leaving directory '/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/asedriveiiie-usb' CFLAGS="-g -O2 -fstack-protector-strong -Wformat -Werror=format-security -g -O2" /usr/bin/make -C asedriveiiie-serial make[1]: Entering directory '/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/asedriveiiie-serial' gcc -o libASESerial.so serial.c atr.c DriverIO.c CommandTypes.c ReaderCommands.c T1Protocol.c MemoryCards.c InitCardParams.c ifdhandler.c -fPIC -D_REENTRANT -DIFDHANDLERv2 -Wall -I. -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -pthread -I/usr/include/PCSC -Wl,-z,relro -shared InitCardParams.c: In function 'MatchReaderParams': InitCardParams.c:52:9: warning: variable 'F' set but not used [-Wunused-but-set-variable] int F, D, WWT; ^ ifdhandler.c: In function 'closeDriver': ifdhandler.c:31:9: warning: variable 'retVal' set but not used [-Wunused-but-set-variable] int retVal, i, readerNum = (Lun & 0xFFFF0000) >> 16; ^ sed "s#\%PCSC_DRIVERS_DIR\%#/usr/lib/pcsc/drivers#g" < etc/reader.conf.in > etc/reader.conf make[1]: Leaving directory '/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/asedriveiiie-serial' touch build-stamp fakeroot debian/rules binary dh_testdir dh_testroot dh_prep dh_installdirs /usr/bin/make -C asedriveiiie-usb install DESTDIR=`pwd`/debian/libasedrive-usb make[1]: Entering directory '/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/asedriveiiie-usb' gcc -o libASEDriveIIIe-USB.so usb.c atr.c DriverIO.c CommandTypes.c ReaderCommands.c T1Protocol.c MemoryCards.c InitCardParams.c ifdhandler.c -fPIC -D_REENTRANT -DIFDHANDLERv2 -Wall -I. -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -pthread -I/usr/include/PCSC -Wl,-z,relro -lusb -shared InitCardParams.c: In function 'MatchReaderParams': InitCardParams.c:52:9: warning: variable 'F' set but not used [-Wunused-but-set-variable] int F, D, WWT; ^ ifdhandler.c: In function 'closeDriver': ifdhandler.c:30:9: warning: variable 'retVal' set but not used [-Wunused-but-set-variable] int retVal, i, readerNum = (Lun & 0xFFFF0000) >> 16; ^ /usr/bin/ld: cannot find /lib/ /usr/bin/ld: cannot find s/libusb-0.1.so.4.4.4 collect2: error: ld returned 1 exit status %Makefile:13: recipe for target 'libASEDriveIIIe-USB.so' failed make[1]: [libASEDriveIIIe-USB.so] Error 1 (ignored) install -c -d "/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/debian/libasedrive-usb//usr/lib/pcsc/drivers/ifd-ASEDriveIIIe-USB.bundle/Contents" install -c -m 0644 ifd-ASEDriveIIIe-USB.bundle/Contents/Info.plist ifd-ASEDriveIIIe-USB.bundle/Contents/PkgInfo "/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/debian/libasedrive-usb//usr/lib/pcsc/drivers/ifd-ASEDriveIIIe-USB.bundle/Contents" install -c -d "/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/debian/libasedrive-usb//usr/lib/pcsc/drivers/ifd-ASEDriveIIIe-USB.bundle/Contents/Resources/English.lproj" install -c -m 0644 ifd-ASEDriveIIIe-USB.bundle/Contents/Resources/English.lproj/InfoPlist.strings "/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/debian/libasedrive-usb//usr/lib/pcsc/drivers/ifd-ASEDriveIIIe-USB.bundle/Contents/Resources/English.lproj" install -c -d "/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/debian/libasedrive-usb//usr/lib/pcsc/drivers/ifd-ASEDriveIIIe-USB.bundle/Contents/Linux" install -c -m 0755 libASEDriveIIIe-USB.so "/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/debian/libasedrive-usb//usr/lib/pcsc/drivers/ifd-ASEDriveIIIe-USB.bundle/Contents/Linux" install: cannot stat 'libASEDriveIIIe-USB.so': No such file or directory Makefile:22: recipe for target 'install' failed make[1]: *** [install] Error 1 make[1]: Leaving directory '/home/lamby/temp/cdt.20160504171441.1bydKUjNYo.asedriveiiie/asedriveiiie-3.7/asedriveiiie-usb' debian/rules:59: recipe for target 'install' failed make: *** [install] Error 2 [..] The full build log is attached. Regards, -- ,''`. : :' : Chris Lamb `. `'` [email protected] / chris-lamb.co.uk `-
asedriveiiie.3.7-5.unstable.amd64.log.txt.gz
Description: Binary data
--- End Message ---
--- Begin Message ---> I could reproduce this, but it goes away if I refresh my pbuilder sid > chroot. So something else has been buggy here and fixed inbetween. It was #823525 in libusb. Closing this bug in Bcc. Regards, -- ,''`. : :' : Chris Lamb `. `'` [email protected] / chris-lamb.co.uk `-
--- End Message ---
