Your message dated Sun, 10 Jul 2016 15:40:55 +0200
with message-id <[email protected]>
and subject line arrayprobe has been removed from Debian in 2012
has caused the Debian Bug report #441788,
regarding arrayprobe does not show failed drives
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
441788: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=441788
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: arrayprobe
Version: 2.0-1
Severity: important
This is a raid5 configuration with hot spare. After rebuilding the array it
shows:
# arrayprobe -f /dev/cciss/c1d0
OK Arrayprobe All controllers ok
but
# hpacucli controller slot=1 array A physicaldrive all show
Smart Array 6400 in Slot 1
array A (Failed)
physicaldrive 1:0 (port 1:id 0 , Parallel SCSI, 0 Byte, Failed)
physicaldrive 1:1 (port 1:id 1 , Parallel SCSI, 300 GB, OK)
physicaldrive 1:2 (port 1:id 2 , Parallel SCSI, 300 GB, OK)
physicaldrive 1:3 (port 1:id 3 , Parallel SCSI, 300 GB, OK)
physicaldrive 1:4 (port 1:id 4 , Parallel SCSI, 300 GB, OK)
physicaldrive 1:5 (port 1:id 5 , Parallel SCSI, 300 GB, OK)
physicaldrive 1:8 (port 1:id 8 , Parallel SCSI, 300 GB, OK, active spare)
If running arrayprobe via cron once a day the failed drive might not be
reported at all. That's not what I expect from a status checker.
Regards,
Torsten
Sitz der Gesellschaft / Corporate Headquarters:
Deutsche Lufthansa Aktiengesellschaft, Koeln
Registereintragung / Registration:
Amtsgericht Koeln HR B 2168
Vorsitzender des Aufsichtsrats /
Chairman of the Supervisory Board:
Dipl.-Ing. Dr.-Ing. E.h. Juergen Weber
Vorstand / Executive Board:
Wolfgang Mayrhuber (Vorsitzender / Chairman)
Stephan Gemkow
Stefan Lauer
--- End Message ---
--- Begin Message ---
Version: 2.0-3.2+rm
arrayprobe was last released with Debian 6.0 (squeeze) in
February 2011 and removed from Debian sid/unstable in 2012 (see
http://bugs.debian.org/656590 for details on the removal). Since
support for squeeze and squeeze-LTS has now ended, I'm closing all the
remaining bugs reported against this package.
Andreas
--- End Message ---
