Your message dated Sun, 12 Mar 2006 16:32:11 -0800
with message-id <[EMAIL PROTECTED]>
and subject line Bug#355604: fixed in sbuild 0.42
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: sbuild
Version: 0.35
Severity: normal
Hi,
sbuild uses the non-chrooted install of apt, rather than the copy
installed inside the chroot. I've not investigated why yet.
If apt-listbugs is installed, and requires human interaction before
unpacking, sbuild freezes. Removing apt-listbugs from the non-chroot
environment allows sbuild to work again. Therefore, I suggest making
sbuild conflict with apt-listbugs.
Regards,
Roger
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.11-1-386
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Versions of packages sbuild depends on:
ii adduser 3.63 Add and remove users and groups
ii apt 0.5.28.6 Advanced front-end for dpkg
ii dpkg-dev 1.10.27 Package building tools for Debian
ii exim4 4.50-4 metapackage to ease exim MTA (v4)
ii exim4-daemon-light [mail-tra 4.50-4 lightweight exim MTA (v4) daemon
ii grep-dctrl 2.1.10 Grep Debian package information
ii perl 5.8.4-8 Larry Wall's Practical Extraction
ii sudo 1.6.8p7-1.1 Provide limited super user privile
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: sbuild
Source-Version: 0.42
We believe that the bug you reported is fixed in the latest version of
sbuild, which is due to be installed in the Debian FTP archive:
sbuild_0.42.dsc
to pool/main/s/sbuild/sbuild_0.42.dsc
sbuild_0.42.tar.gz
to pool/main/s/sbuild/sbuild_0.42.tar.gz
sbuild_0.42_all.deb
to pool/main/s/sbuild/sbuild_0.42_all.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [EMAIL PROTECTED],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Roger Leigh <[EMAIL PROTECTED]> (supplier of updated sbuild package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [EMAIL PROTECTED])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.7
Date: Mon, 13 Mar 2006 00:14:00 +0000
Source: sbuild
Binary: sbuild
Architecture: source all
Version: 0.42
Distribution: unstable
Urgency: low
Maintainer: Debian buildd-tools Developers <[EMAIL PROTECTED]>
Changed-By: Roger Leigh <[EMAIL PROTECTED]>
Description:
sbuild - Tool for building Debian binary packages from Debian sources
Closes: 170742 183022 355040 355043 355072 355604 355802 355861
Changes:
sbuild (0.42) unstable; urgency=low
.
* sbuild:
- get_apt_command_internal(): Always add $main::chroot_apt_options.
- log_command(): Add an additional priority argument. If nonzero,
the message is always logged, otherwise is only logged if debug is
enabled.
- get_command_internal(): When running schroot, preserve the user
environment, needed for APT_CONFIG, DEBIAN_FRONTEND, etc..
- get_command(), run_command(), exec_command(), get_apt_command(),
run_apt_command():
+ chdir to $main::cwd to make sure the directory location also exists
inside the chroot.
+ Add an additional priority argument to control the urgency of the
log message, and pass this to log_command().
- get_virtuals(): Remove usage of $main::chroot_apt_options, which is
added automatically by get_apt_command().
- get_command(), run_command() and exec_command() only log the full
command when debugging is enabled, otherwise only the short form is
logged (Closes: #355043).
- setup_options():
+ Ensure APT_CONFIG is set to the correct path depending upon the
chroot_mode. $chroot_aptconf is the absolute path to the file from
the host system, while $aptconf is the absolute path when apt is
run.
+ Only set $main::chroot_apt_options when chroot_mode is "split".
+ Always regenerate apt.conf, because when chroot_mode is changed, it
will break APT unless rewritten.
+ Don't set "Dir" in $chroot_aptconf when in chroot_mode is "schroot"
(because apt is run inside the chroot).
- Remove setpgrp() calls, so that all child processes run in the same
process group as the parent.
- Add a $conf::sbuild_mode, used to switch behaviour between user and
buildd defaults. The default is "buildd". This allows package build
errors to be reported (Closes: #170742).
- Add a --quiet option, the opposite action to --verbose.
- open_pkg_log():
+ Use correct Sbuild:: namespace for binNMU_version (Closes: #355861).
+ Create current-distribution symlink in addition to current.
- Set the in the environment SHELL=/bin/sh, in case the user
invoking sbuild uses a shell not available inside the chroot.
- Remove unused variables @dist_parts and $main::nomail.
- Use correct use syntax for File::Temp and Cwd, and initialise a
number of variables which would otherwise be undefined, in order
to remove run-time warnings.
- Add a number of checks for undefined variables to remove run-time
warnings.
- Add -w to the shebang line, so sbuild always runs with warnings
enabled.
- All exec commands other than writing logfiles now use exec_command,
so they get logged.
- Require /usr/share/sbuild/sbuild.conf and optionally require
/etc/sbuild/sbuild.conf.
- Use named signals, rather than numbers, for portability.
- close_log(), close_pkg_log: If verbose is enabled, flush the log and
wait a second before killing tee, to prevent data loss in the pipeline.
- $main::verbose is set by default if running on a tty (Closes: #355802).
- LOG and PLOG are set to autoflush using IO::Handle.
- $conf::build_dir defaults to $main::cwd if undefined. It is used as
the directory containing the build chroots, build logs, and current
symlinks (Closes: #183022).
- Always print toolchain packages. This is done by always calling
merge_pkg_build_deps(), and running all the way through
install_deps(), even when the package does not supply any build
dependencies or conflicts (Closes: #355040).
- install_deps():
+ If there are no package dependencies, create an
empty anonymous array reference to hold the (nonexistent)
dependencies, required by filter_dependencies.
+ Make sure %entries is initialised.
- fetch_source_files(): Check that the dsc specified is valid.
* sbuild.conf: Don't require local config file.
* sbuild.conf.local: Add $sbuild_mode, defaulting to "buildd".
* example.sbuildrc: Add $build_dir example.
* sbuild.1: Document --quiet.
* sbuild-setup.5:
- Split chroot setup and user setup into two sections.
- Document sudoers env_keep setup (Closes: #355072, #355604).
* Sbuild.pm: Remove unused module 'IO'.
* chroot/add_sbuild_user: Add sudoers env_keep example.
* debian/README.Debian: Document existence of sbuild-setup(7).
* debian/control:
- Depend on perl-modules (for File::Temp).
- Recommend schroot 0.2.7 or later (for preserving the environment).
* debian/dirs: Add etc/sbuild.
* debian/rules:
- Remove "make clean" in clean target; there is no Makefile, so this is
redundant.
- Install sbuild.conf as /usr/share/sbuild/sbuild.conf and
sbuild.conf.local as /etc/sbuild/sbuild.conf.
* debian/preinst:
- New conffile.
- Remove /etc/sbuild.conf.local if not locally modified.
* debian/postinst:
- Move /etc/sbuild.conf.local to /etc/sbuild/sbuild.conf if needed.
- Reindent.
* debian/postrm:
- Unlink /etc/sbuild.conf if present.
- Unlink files under /var/lib/sbuild.
- Reindent.
Files:
953480dc56644586da02e3596658f7e1 661 devel extra sbuild_0.42.dsc
70a16cbbade055b330acbdf21c5ef876 64669 devel extra sbuild_0.42.tar.gz
13ed3a09af4808e9becb2a38b563f8ba 71942 devel extra sbuild_0.42_all.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
iD8DBQFEFLmmVcFcaSW/uEgRAjthAJ9d8YFeQExNljQYGqLsP7Iy+StHZQCeKVBH
qWw4evYt2Ue8ltyJPfnIZac=
=Mujd
-----END PGP SIGNATURE-----
--- End Message ---
