--- Begin Message ---
Package: cura
Version: 3.1.0-1
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
starting cura
* What exactly did you do (or not do) that was effective (or ineffective)?
i tried removing local/share/cura folder and starting in X11 and wayland
* What was the outcome of this action?
crashes during startup
* What outcome did you expect instead?
cura starting
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.15.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8),
LANGUAGE=de_AT:de (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages cura depends on:
ii cura-engine 1:3.1.0-2
ii fonts-open-sans 1.11-1
ii python3 3.6.4-1
ii python3-pyqt5 5.10.1+dfsg-1
ii python3-pyqt5.qtopengl 5.10.1+dfsg-1
ii python3-savitar 3.1.0-1
ii python3-serial 3.4-2
ii python3-uranium 3.1.0-1
ii qml-module-qt-labs-folderlistmodel 5.10.1-4
ii qml-module-qt-labs-settings 5.10.1-4
ii qml-module-qtqml-models2 5.10.1-4
ii qml-module-qtquick-controls 5.10.1-2
ii qml-module-qtquick-dialogs 5.10.1-2
ii uranium-plugins 3.1.0-1
Versions of packages cura recommends:
ii fdm-materials 3.1.0-1
ii python3-zeroconf 0.19.1-1
cura suggests no packages.
-- no debconf information
2018-04-26 22:09:32,429 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin ConsoleLogger
2018-04-26 22:09:32,442 - INFO - CuraEngineBackend.CuraEngineBackend.__init__
[64]: Found CuraEngine at: /usr/bin/CuraEngine
2018-04-26 22:09:32,444 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin CuraEngineBackend
2018-04-26 22:09:32,451 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin LocalFileOutputDevice
2018-04-26 22:09:32,454 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin OBJWriter
2018-04-26 22:09:32,462 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin OBJReader
2018-04-26 22:09:32,470 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin STLReader
2018-04-26 22:09:32,473 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin STLWriter
2018-04-26 22:09:32,473 - WARNING - UM.PluginRegistry.loadPlugin [200]: Plugin
ConsoleLogger was already loaded
2018-04-26 22:09:32,475 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin FileLogger
2018-04-26 22:09:32,478 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin SimpleView
2018-04-26 22:09:32,483 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin TranslateTool
2018-04-26 22:09:32,487 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin CameraTool
2018-04-26 22:09:32,493 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin ScaleTool
2018-04-26 22:09:32,497 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin MirrorTool
2018-04-26 22:09:32,500 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin SelectionTool
2018-04-26 22:09:32,505 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin RotateTool
2018-04-26 22:09:32,505 - WARNING - UM.PluginRegistry.loadPlugin [200]: Plugin
CuraEngineBackend was already loaded
2018-04-26 22:09:32,511 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin XmlMaterialProfile
2018-04-26 22:09:32,513 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin AutoSave
2018-04-26 22:09:32,528 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin LegacyProfileReader
2018-04-26 22:09:32,530 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin PerObjectSettingsTool
2018-04-26 22:09:32,531 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin VersionUpgrade27to30
2018-04-26 22:09:32,533 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin VersionUpgrade30to31
2018-04-26 22:09:32,536 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin VersionUpgrade26to27
2018-04-26 22:09:32,538 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin VersionUpgrade25to26
2018-04-26 22:09:32,540 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin VersionUpgrade22to24
2018-04-26 22:09:32,542 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin VersionUpgrade21to22
2018-04-26 22:09:32,549 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin PluginBrowser
2018-04-26 22:09:32,552 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin ChangeLogPlugin
2018-04-26 22:09:32,554 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin GCodeWriter
2018-04-26 22:09:32,623 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin OctoPrintPlugin
2018-04-26 22:09:32,632 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin 3MFReader
2018-04-26 22:09:32,636 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin UserAgreementPlugin
2018-04-26 22:09:32,638 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin GCodeProfileReader
2018-04-26 22:09:32,641 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin XRayView
2018-04-26 22:09:32,645 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin SimulationView
2018-04-26 22:09:32,648 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin X3DReader
2018-04-26 22:09:32,651 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin SolidView
2018-04-26 22:09:32,654 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin 3MFWriter
2018-04-26 22:09:32,657 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin MachineSettingsAction
2018-04-26 22:09:32,666 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin USBPrinting
2018-04-26 22:09:32,677 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin ImageReader
2018-04-26 22:09:32,681 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin CuraProfileReader
2018-04-26 22:09:32,686 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin UltimakerMachineActions
2018-04-26 22:09:32,690 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin GCodeReader
2018-04-26 22:09:32,699 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin UM3NetworkPrinting
2018-04-26 22:09:32,703 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin RemovableDriveOutputDevice
2018-04-26 22:09:32,706 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin CuraProfileWriter
2018-04-26 22:09:32,729 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin FirmwareUpdateChecker
2018-04-26 22:09:32,732 - INFO - UM.PluginRegistry.loadPlugin [238]: Loaded
plugin SliceInfoPlugin
2018-04-26 22:09:32,742 - DEBUG - UM.Backend.Backend._logSocketState [174]:
Socket state changed to Listening
2018-04-26 22:09:32,751 - INFO - UM.Backend.Backend.startEngine [75]: Started
engine process: /usr/bin/CuraEngine
2018-04-26 22:09:32,753 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect',
'127.0.0.1:49674', '-j',
'/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
2018-04-26 22:09:32,771 - DEBUG - UM.Backend.Backend._logSocketState [178]:
Socket state changed to Connected
2018-04-26 22:09:32,771 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend]
2018-04-26 22:09:32,773 - DEBUG - UM.Backend.Backend._onSocketStateChanged
[168]: Backend connected on port 49674
2018-04-26 22:09:32,773 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] Cura_SteamEngine version 3.1.0
2018-04-26 22:09:32,774 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] Copyright (C) 2017 Ultimaker
2018-04-26 22:09:32,775 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend]
2018-04-26 22:09:32,775 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] This program is free software: you can redistribute it and/or modify
2018-04-26 22:09:32,776 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] it under the terms of the GNU Affero General Public License as
published by
2018-04-26 22:09:32,777 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] the Free Software Foundation, either version 3 of the License, or
2018-04-26 22:09:32,777 - INFO - UM.VersionUpgradeManager.upgrade [112]:
Looking for old configuration files to upgrade.
2018-04-26 22:09:32,778 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] (at your option) any later version.
2018-04-26 22:09:32,780 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend]
2018-04-26 22:09:32,782 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] This program is distributed in the hope that it will be useful,
2018-04-26 22:09:32,784 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2018-04-26 22:09:32,787 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2018-04-26 22:09:32,788 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] GNU Affero General Public License for more details.
2018-04-26 22:09:32,789 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend]
2018-04-26 22:09:32,790 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] You should have received a copy of the GNU Affero General Public
License
2018-04-26 22:09:32,792 - DEBUG - UM.Backend.Backend._backendLog [93]:
[Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
2018-04-26 22:09:32,799 - DEBUG - USBPrinting.USBPrinterOutputDevice._connect
[312]: Attempting to connect to /dev/ttyUSB0
2018-04-26 22:09:32,799 - DEBUG -
OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [161]: Bonjour
service added: octopi._octoprint._tcp.local
2018-04-26 22:09:32,800 - DEBUG - USBPrinting.USBPrinterOutputDevice._connect
[312]: Attempting to connect to /dev/ttyUSB2
2018-04-26 22:09:32,801 - DEBUG - USBPrinting.USBPrinterOutputDevice._connect
[312]: Attempting to connect to /dev/ttyUSB1
2018-04-26 22:09:32,896 - WARNING -
UM.OutputDevice.OutputDeviceManager.removeOutputDevice [126]: Could not find
output device with id /dev/ttyUSB0 to remove
2018-04-26 22:09:32,899 - WARNING -
UM.OutputDevice.OutputDeviceManager.removeOutputDevice [126]: Could not find
output device with id /dev/ttyUSB2 to remove
2018-04-26 22:09:32,900 - WARNING -
UM.OutputDevice.OutputDeviceManager.removeOutputDevice [126]: Could not find
output device with id /dev/ttyUSB1 to remove
2018-04-26 22:09:32,996 - WARNING - UM.Settings.ContainerRegistry.load [187]:
Could not determine container type for file
/home/karl/.local/share/cura/3.1/machine_instances/AnetA8WithInit.json, ignoring
2018-04-26 22:09:34,438 - INFO - USBPrinting.USBPrinterOutputDevice._connect
[320]: Could not establish connection on /dev/ttyUSB0: 'Timeout'. Device is not
arduino based.
2018-04-26 22:09:34,438 - INFO - USBPrinting.USBPrinterOutputDevice._connect
[320]: Could not establish connection on /dev/ttyUSB1: 'Timeout'. Device is not
arduino based.
2018-04-26 22:09:34,439 - DEBUG - USBPrinting.USBPrinterOutputDevice._connect
[328]: Attempting to connect to printer with serial /dev/ttyUSB0 on baud rate
115200
2018-04-26 22:09:34,440 - INFO - USBPrinting.USBPrinterOutputDevice._connect
[320]: Could not establish connection on /dev/ttyUSB2: 'Timeout'. Device is not
arduino based.
2018-04-26 22:09:34,440 - DEBUG - USBPrinting.USBPrinterOutputDevice._connect
[328]: Attempting to connect to printer with serial /dev/ttyUSB1 on baud rate
115200
2018-04-26 22:09:34,440 - DEBUG - USBPrinting.USBPrinterOutputDevice._connect
[328]: Attempting to connect to printer with serial /dev/ttyUSB2 on baud rate
115200
2018-04-26 22:09:38,946 - INFO -
FirmwareUpdateChecker.FirmwareUpdateChecker._onContainerAdded [52]: You have a
'Prusa i3' in printer list. Let's check the firmware!
2018-04-26 22:09:38,950 - INFO -
FirmwareUpdateChecker.FirmwareUpdateChecker._onContainerAdded [52]: You have a
'Custom FDM printer' in printer list. Let's check the firmware!
2018-04-26 22:09:38,953 - INFO - cura.Settings.GlobalStack.addExtruder [74]:
Extruder[custom_extruder_3 #2] added to [Custom FDM printer] at position [2]
2018-04-26 22:09:38,954 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:38,956 - INFO - cura.Settings.GlobalStack.addExtruder [74]:
Extruder[custom_extruder_7 #2] added to [Custom FDM printer] at position [6]
2018-04-26 22:09:38,956 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:38,958 - INFO - cura.Settings.GlobalStack.addExtruder [74]:
Extruder[custom_extruder_1 #2] added to [Custom FDM printer] at position [0]
2018-04-26 22:09:38,958 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:38,960 - INFO - cura.Settings.GlobalStack.addExtruder [74]:
Extruder[custom_extruder_6 #2] added to [Custom FDM printer] at position [5]
2018-04-26 22:09:38,960 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:38,962 - INFO - cura.Settings.GlobalStack.addExtruder [74]:
Extruder[custom_extruder_8 #2] added to [Custom FDM printer] at position [7]
2018-04-26 22:09:38,962 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:38,964 - INFO - cura.Settings.GlobalStack.addExtruder [74]:
Extruder[Prusa i3 fdmextruder] added to [Prusa i3] at position [0]
2018-04-26 22:09:38,964 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:38,966 - INFO - cura.Settings.GlobalStack.addExtruder [74]:
Extruder[custom_extruder_5 #2] added to [Custom FDM printer] at position [4]
2018-04-26 22:09:38,966 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:38,968 - INFO - cura.Settings.GlobalStack.addExtruder [74]:
Extruder[custom_extruder_4 #2] added to [Custom FDM printer] at position [3]
2018-04-26 22:09:38,968 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:38,970 - INFO - cura.Settings.GlobalStack.addExtruder [74]:
Extruder[custom_extruder_2 #2] added to [Custom FDM printer] at position [1]
2018-04-26 22:09:38,970 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:38,970 - DEBUG - UM.Settings.ContainerRegistry.load [231]:
Loading data into container registry took 5.97313380241394 seconds
2018-04-26 22:09:39,279 - DEBUG - UM.Controller.setActiveView [86]: Setting
active view to SolidView
2018-04-26 22:09:39,397 - DEBUG - OctoPrintPlugin.OctoPrintOutputDevice.connect
[333]: Connection with instance Octopi with url http://octopi.lan:80/ started
2018-04-26 22:09:39,398 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_3 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:39,398 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:39,399 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_3 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:39,399 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_7 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:39,399 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:39,399 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_7 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:39,399 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_1 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:39,399 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:39,399 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_1 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:39,400 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_6 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:39,400 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:39,400 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_6 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:39,400 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_8 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:39,400 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:39,400 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_8 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:39,401 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_5 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:39,401 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:39,401 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_5 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:39,401 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_4 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:39,401 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:39,401 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_4 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:39,401 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_2 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:39,401 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:39,402 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_2 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:41,555 - DEBUG -
OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [752]: Set OctoPrint
camera url to http://octopi.lan:8080/?action=stream
2018-04-26 22:09:42,661 - DEBUG - UM.Qt.Bindings.Theme.load [164]: Loading
theme file: /usr/share/cura/resources/themes/cura-light/theme.json
2018-04-26 22:09:42,668 - DEBUG - UM.Qt.Bindings.Theme.load [232]: Loaded theme
/usr/share/cura/resources/themes/cura-light
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
2018-04-26 22:09:42,789 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_3 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:42,789 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:42,789 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_3 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:42,790 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_7 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:42,790 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:42,790 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_7 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:42,790 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_1 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:42,790 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:42,790 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_1 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:42,790 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_6 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:42,790 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:42,791 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_6 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:42,791 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_8 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:42,791 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:42,791 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_8 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:42,791 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_5 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:42,791 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:42,791 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_5 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:42,792 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_4 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:42,792 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:42,792 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_4 #2] has already been registered on machine [Custom FDM
printer], not doing anything
2018-04-26 22:09:42,792 - WARNING - cura.Settings.GlobalStack.addExtruder [70]:
Extruder [custom_extruder_2 #2] has already been added to this stack [Custom
FDM printer]
2018-04-26 22:09:42,792 - WARNING - UM.Settings.ContainerStack.addMetaDataEntry
[162]: Meta data with key machine was already added.
2018-04-26 22:09:42,792 - WARNING -
cura.Settings.ExtruderManager.registerExtruder [220]: Extruder
[custom_extruder_2 #2] has already been registered on machine [Custom FDM
printer], not doing anything
QObject::connect: Parentheses expected, signal MainWindow::
2018-04-26 22:09:42,885 - DEBUG - UM.Controller.setActiveView [86]: Setting
active view to SolidView
Fatal Python error: Segmentation fault
Thread 0x00007f01dffff700 (most recent call first):
File "/usr/lib/python3.6/threading.py", line 295 in wait
File "/usr/lib/python3.6/threading.py", line 426 in acquire
File "/usr/lib/python3/dist-packages/UM/JobQueue.py", line 86 in _nextJob
File "/usr/lib/python3/dist-packages/UM/JobQueue.py", line 116 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f01fcff9700 (most recent call first):
File "/usr/lib/python3.6/threading.py", line 295 in wait
File "/usr/lib/python3.6/threading.py", line 426 in acquire
File "/usr/lib/python3/dist-packages/UM/JobQueue.py", line 86 in _nextJob
File "/usr/lib/python3/dist-packages/UM/JobQueue.py", line 116 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f01fd7fa700 (most recent call first):
File "/usr/lib/python3.6/threading.py", line 295 in wait
File "/usr/lib/python3.6/threading.py", line 426 in acquire
File "/usr/lib/python3/dist-packages/UM/JobQueue.py", line 86 in _nextJob
File "/usr/lib/python3/dist-packages/UM/JobQueue.py", line 116 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f01fdffb700 (most recent call first):
File "/usr/lib/python3.6/threading.py", line 295 in wait
File "/usr/lib/python3.6/threading.py", line 426 in acquire
File "/usr/lib/python3/dist-packages/UM/JobQueue.py", line 86 in _nextJob
File "/usr/lib/python3/dist-packages/UM/JobQueue.py", line 116 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f01fe7fc700 (most recent call first):
File "/usr/lib/python3/dist-packages/UM/Backend/Backend.py", line 156 in
_storeStderrToLogThread
File "/usr/lib/python3.6/threading.py", line 864 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f01feffd700 (most recent call first):
File "/usr/lib/python3/dist-packages/UM/Backend/Backend.py", line 148 in
_storeOutputToLogThread
File "/usr/lib/python3.6/threading.py", line 864 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f01ff7fe700 (most recent call first):
File "/usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py", line 332
in _connect
File "/usr/lib/python3.6/threading.py", line 864 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f01fffff700 (most recent call first):
File "/usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py", line 332
in _connect
File "/usr/lib/python3.6/threading.py", line 864 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f021cddc700 (most recent call first):
File "/usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py", line 332
in _connect
File "/usr/lib/python3.6/threading.py", line 864 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f021dffb700 (most recent call first):
File
"/usr/lib/cura/plugins/RemovableDriveOutputDevice/RemovableDrivePlugin.py",
line 61 in _updateThread
File "/usr/lib/python3.6/threading.py", line 864 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f021e7fc700 (most recent call first):
File "/usr/lib/python3.6/threading.py", line 299 in wait
File "/usr/lib/python3/dist-packages/zeroconf.py", line 1716 in wait
File "/usr/lib/python3/dist-packages/zeroconf.py", line 1317 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f021effd700 (most recent call first):
File "/usr/lib/python3.6/threading.py", line 299 in wait
File "/usr/lib/python3/dist-packages/zeroconf.py", line 1716 in wait
File "/usr/lib/python3/dist-packages/zeroconf.py", line 1181 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f021f7fe700 (most recent call first):
File "/usr/lib/python3/dist-packages/zeroconf.py", line 1102 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f021ffff700 (most recent call first):
File "/usr/lib/python3.6/threading.py", line 299 in wait
File "/usr/lib/python3.6/threading.py", line 551 in wait
File
"/usr/lib/cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevicePlugin.py",
line 326 in _handleOnServiceChangedRequests
File "/usr/lib/python3.6/threading.py", line 864 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f02349d9700 (most recent call first):
File "/usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py",
line 88 in _updateThread
File "/usr/lib/python3.6/threading.py", line 864 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f0235a36700 (most recent call first):
File "/usr/lib/python3.6/threading.py", line 299 in wait
File "/usr/lib/python3/dist-packages/zeroconf.py", line 1716 in wait
File "/usr/lib/python3/dist-packages/zeroconf.py", line 1317 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f0236237700 (most recent call first):
File "/usr/lib/python3.6/threading.py", line 299 in wait
File "/usr/lib/python3/dist-packages/zeroconf.py", line 1716 in wait
File "/usr/lib/python3/dist-packages/zeroconf.py", line 1181 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Thread 0x00007f0236a38700 (most recent call first):
File "/usr/lib/python3/dist-packages/zeroconf.py", line 1102 in run
File "/usr/lib/python3.6/threading.py", line 916 in _bootstrap_inner
File "/usr/lib/python3.6/threading.py", line 884 in _bootstrap
Current thread 0x00007f026f8b3740 (most recent call first):
File "/usr/lib/python3/dist-packages/UM/Qt/QtApplication.py", line 237 in
initializeEngine
File "/usr/lib/python3/dist-packages/cura/CuraApplication.py", line 717 in run
File "/usr/bin/cura", line 83 in <module>
--- End Message ---
