Your message dated Wed, 22 May 2019 14:44:13 +0000 with message-id <[email protected]> and subject line Bug#908770: fixed in lprng 3.8.B-2.2 has caused the Debian Bug report #908770, regarding lprng: Will not cofigure on systemd init to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 908770: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908770 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: lprng Version: 3.8.B-2.1 Severity: important Dear Maintainer, I used aptitude to upgrade packages and it somehow converted sysv init to systemd init. Most updated packages installed OK except lprng failed to configure. I tried installing it on another drive (that has some unknown corruption on it that wiil not allow some packages to configure) and that uses sysv init. It installed OK and thus I suspect that systemd has something to do with this failure. In the /etc/init.d/lprng scripts I put -x at the end of the 1st line (for debugging) and ran them with the "start" variable. The results were good on the sysvinit drive but bad on the systemd drive. Both results are shown below: For the good script using sysvinit: + PATH=/sbin:/usr/sbin:/bin:/usr/bin + DESC=LPRng printer spooler + NAME=lprng + DAEMON=/usr/sbin/lpd + CONFIGDIR=/etc/lprng + PRINTCAP=/etc/printcap + LPDPRINTCAP=/etc/lprng/printcap + SCRIPTNAME=/etc/init.d/lprng + test -f /etc/printcap + test -f /usr/sbin/lpd + sed /^[[:space:]]*lpd_port/!d; s/.*[=#]\(.*\)/\1/; q /etc/lprng/lpd.conf + LPD_PORT= + [ -z ] + LPD_PORT=515 + sed /^[[:space:]]*lockfile/!d; s/.*[=#]\(.*\)/\1/; q /etc/lprng/lpd.conf + LOCKFILE= + [ -z ] + LOCKFILE=/var/run/lprng/lpd + PIDFILE=/var/run/lprng/lpd.515 + . /lib/init/vars.sh + TMPTIME=0 + SULOGIN=no + DELAYLOGIN=no + UTC=yes + VERBOSE=no + FSCKFIX=no + [ -f /etc/default/rcS ] + . /etc/default/rcS + unset EDITMOTD + unset RAMRUN + unset RAMLOCK + [ -r /proc/cmdline ] + cat /proc/cmdline + [ ] + . /lib/lsb/init-functions + run-parts --lsbsysinit --list /lib/lsb/init-functions.d + [ -r /lib/lsb/init-functions.d/20-left-info-blocks /lib/lsb/init-functions.d/40-systemd ] + true + FANCYTTY= + [ -e /etc/lsb-base-logging.sh ] + true + [ -r /etc/default/lprng ] + . /etc/default/lprng + START_LPD=yes + [ yes != yes ] + [ no != no ] + initialise + dirname /var/run/lprng/lpd.515 + RUNDIR=/var/run/lprng + [ ! -d /var/run/lprng ] + checkpc -f + start-stop-daemon --start --quiet --pidfile /var/run/lprng/lpd.515 --exec /usr/sbin/lpd + [ no != no ] + exit 1 For the bad case usuing ststemd: + PATH=/sbin:/usr/sbin:/bin:/usr/bin + DESC='LPRng printer spooler' + NAME=lprng + DAEMON=/usr/sbin/lpd + CONFIGDIR=/etc/lprng + PRINTCAP=/etc/printcap + LPDPRINTCAP=/etc/lprng/printcap + SCRIPTNAME=/etc/init.d/lprng + test -f /etc/printcap + test -f /usr/sbin/lpd ++ sed '/^[[:space:]]*lpd_port/!d; s/.*[=#]\(.*\)/\1/; q' /etc/lprng/lpd.conf + LPD_PORT= + '[' -z ']' + LPD_PORT=515 ++ sed '/^[[:space:]]*lockfile/!d; s/.*[=#]\(.*\)/\1/; q' /etc/lprng/lpd.conf + LOCKFILE= + '[' -z ']' + LOCKFILE=/var/run/lprng/lpd + PIDFILE=/var/run/lprng/lpd.515 + . /lib/init/vars.sh ++ TMPTIME=0 ++ SULOGIN=no ++ DELAYLOGIN=no ++ UTC=yes ++ VERBOSE=no ++ FSCKFIX=no ++ '[' -f /etc/default/rcS ']' ++ . /etc/default/rcS ++ unset EDITMOTD ++ unset RAMRUN ++ unset RAMLOCK ++ '[' -r /proc/cmdline ']' +++ cat /proc/cmdline ++ for ARG in $(cat /proc/cmdline) ++ case $ARG in ++ for ARG in $(cat /proc/cmdline) ++ case $ARG in ++ for ARG in $(cat /proc/cmdline) ++ case $ARG in ++ for ARG in $(cat /proc/cmdline) ++ case $ARG in ++ for ARG in $(cat /proc/cmdline) ++ case $ARG in ++ for ARG in $(cat /proc/cmdline) ++ case $ARG in ++ '[' '' ']' + . /lib/lsb/init-functions +++ run-parts --lsbsysinit --list /lib/lsb/init-functions.d ++ for hook in $(run-parts --lsbsysinit --list /lib/lsb/init-functions.d 2>/dev/null) ++ '[' -r /lib/lsb/init-functions.d/20-left-info-blocks ']' ++ . /lib/lsb/init-functions.d/20-left-info-blocks ++ for hook in $(run-parts --lsbsysinit --list /lib/lsb/init-functions.d 2>/dev/null) ++ '[' -r /lib/lsb/init-functions.d/40-systemd ']' ++ . /lib/lsb/init-functions.d/40-systemd +++ _use_systemctl=0 +++ '[' -d /run/systemd/system ']' +++ prog=lprng +++ service=lprng.service ++++ systemctl -p LoadState --value show lprng.service +++ state=loaded +++ '[' loaded = masked ']' +++ '[' 1135 -ne 1 ']' +++ '[' -z '' ']' +++ case $(readlink -f "$0") in ++++ readlink -f ./lprng +++ '[' loaded '!=' not-found ']' +++ _use_systemctl=1 ++++ systemctl -p CanReload --value show lprng.service +++ '[' no = no ']' +++ '[' start = reload ']' +++ '[' 1 = 1 ']' +++ set +e +++ set +u +++ '[' xstart = xstart -o xstart = xstop -o xstart = xrestart -o xstart = xreload -o xstart = xforce-reload -o xstart = xtry-restart -o xstart = xstatus ']' +++ systemctl_redirect ./lprng start +++ local s +++ local rc +++ local prog=lprng +++ local command=start +++ case "$command" in +++ s='Starting lprng (via systemctl)' +++ service=lprng.service ++++ systemctl is-system-running +++ OUT=degraded +++ '[' degraded '!=' degraded ']' +++ '[' start = status ']' +++ log_daemon_msg 'Starting lprng (via systemctl)' lprng.service +++ '[' -z 'Starting lprng (via systemctl)' ']' +++ log_daemon_msg_pre 'Starting lprng (via systemctl)' lprng.service +++ log_use_fancy_output +++ TPUT=/usr/bin/tput +++ EXPR=/usr/bin/expr +++ '[' -t 1 ']' +++ FANCYTTY=0 +++ case "$FANCYTTY" in +++ false +++ '[' -z lprng.service ']' +++ echo -n 'Starting lprng (via systemctl): lprng.service' Starting lprng (via systemctl): lprng.service+++ log_daemon_msg_post 'Starting lprng (via systemctl)' lprng.service +++ : +++ /bin/systemctl --no-pager start lprng.service Warning: The unit file, source configuration file or drop-ins of lprng.service changed on disk. Run 'systemctl daemon-reload' to reload units. Job for lprng.service failed because the control process exited with error code. See "systemctl status lprng.service" and "journalctl -xe" for details. +++ rc=1 +++ '[' start = status ']' +++ log_end_msg 1 +++ '[' -z 1 ']' +++ local retval +++ retval=1 +++ log_end_msg_pre 1 +++ log_use_fancy_output +++ TPUT=/usr/bin/tput +++ EXPR=/usr/bin/expr +++ '[' -t 1 ']' +++ FANCYTTY=0 +++ case "$FANCYTTY" in +++ false +++ log_use_fancy_output +++ TPUT=/usr/bin/tput +++ EXPR=/usr/bin/expr +++ '[' -t 1 ']' +++ FANCYTTY=0 +++ case "$FANCYTTY" in +++ false +++ RED= +++ YELLOW= +++ NORMAL= +++ '[' 1 -eq 0 ']' +++ '[' 1 -eq 255 ']' +++ /bin/echo -e ' failed!' failed! +++ log_end_msg_post 1 +++ : +++ return 1 +++ return 1 +++ exit 1 -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 4.14.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8) Shell: /bin/sh linked to /bin/bash Init: systemd (via /run/systemd/system) Versions of packages lprng depends on: ii debconf [debconf-2.0] 1.5.69 ii libc6 2.27-5 ii libcomerr2 1.44.4-2 ii libk5crypto3 1.16-2 ii libkrb5-3 1.16-2 ii libssl1.1 1.1.0h-4 ii lsb-base 9.20170808 lprng recommends no packages. Versions of packages lprng suggests: ii lprng-doc 3.8.A~rc2-3.1 pn magicfilter <none> -- Configuration Files: /etc/init.d/lprng changed: PATH=/sbin:/usr/sbin:/bin:/usr/bin DESC="LPRng printer spooler" NAME=lprng DAEMON=/usr/sbin/lpd CONFIGDIR=/etc/lprng PRINTCAP=/etc/printcap LPDPRINTCAP=/etc/lprng/printcap SCRIPTNAME=/etc/init.d/$NAME test -f $PRINTCAP || test -f $LPDPRINTCAP || exit 0 test -f $DAEMON || test -d /usr/lib/i386-linux-gnu/lprng || exit 5 LPD_PORT=$(sed '/^[[:space:]]*lpd_port/!d; s/.*[=#]\(.*\)/\1/; q' $CONFIGDIR/lpd.conf) if [ -z $LPD_PORT ] then LPD_PORT=515 fi LOCKFILE=$(sed '/^[[:space:]]*lockfile/!d; s/.*[=#]\(.*\)/\1/; q' $CONFIGDIR/lpd.conf) if [ -z $LOCKFILE ] then LOCKFILE=/var/run/lprng/lpd fi PIDFILE=$LOCKFILE.$LPD_PORT . /lib/init/vars.sh . /lib/lsb/init-functions if [ -r /etc/default/lprng ]; then . /etc/default/lprng fi initialise() { RUNDIR=$(dirname ${PIDFILE}) [ ! -d ${RUNDIR} ] && mkdir -p ${RUNDIR} checkpc -f > /dev/null || true } cleanup() { rm -f "${PIDFILE}" for dir in $(find /var/spool/lpd/* -type d -print) do rm -f ${dir}/lock.pr rm -f ${dir}/control.pr rm -f ${dir}/unspooler.pr done } case "$1" in start) if [ "$START_LPD" != "yes" ]; then [ "$VERBOSE" != no ] && log_warning_msg "Not starting LPRng - edit /etc/default/lprng and change START_LPD to be yes." exit 0 fi [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" lpd initialise if start-stop-daemon --start --quiet --pidfile "${PIDFILE}" \ --exec $DAEMON ; then [ "$VERBOSE" != no ] && log_end_msg 0 else [ "$VERBOSE" != no ] && log_end_msg 1 exit 1 fi ;; stop) [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" lpd if start-stop-daemon --stop --oknodo --quiet --pidfile "${PIDFILE}" ; then cleanup [ "$VERBOSE" != no ] && log_end_msg 0 else [ "$VERBOSE" != no ] && log_end_msg 1 exit 1 fi ;; status) status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? ;; reload) [ "$VERBOSE" != no ] && log_daemon_msg "Reloading $DESC configuration files..." if start-stop-daemon --stop --signal 1 --quiet --pidfile \ "${PIDFILE}" --oknodo ; then [ "$VERBOSE" != no ] && log_end_msg 0 else [ "$VERBOSE" != no ] && log_end_msg 1 exit 1 fi ;; restart|force-reload) [ "$VERBOSE" != no ] && log_daemon_msg "Restarting $DESC" lpd start-stop-daemon --stop --quiet --pidfile "${PIDFILE}" sleep 1 initialise start-stop-daemon --start --quiet --pidfile "${PIDFILE}" \ --exec $DAEMON [ "$VERBOSE" != no ] && log_end_msg 0 ;; *) echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 exit 1 ;; esac : -- debconf information: lprng/twolpd_conf: * lprng/setuid_tools: false * lprng/start_lpd: true lprng/twolpd_perms:
--- End Message ---
--- Begin Message ---Source: lprng Source-Version: 3.8.B-2.2 We believe that the bug you reported is fixed in the latest version of lprng, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to [email protected], and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Sam Hartman <[email protected]> (supplier of updated lprng package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing [email protected]) -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 1.8 Date: Wed, 22 May 2019 09:18:03 -0400 Source: lprng Architecture: source Version: 3.8.B-2.2 Distribution: unstable Urgency: medium Maintainer: Craig Small <[email protected]> Changed-By: Sam Hartman <[email protected]> Closes: 908770 928040 Changes: lprng (3.8.B-2.2) unstable; urgency=medium . * Non-maintainer upload. * Specify executable and user to stop-start-daemon; closes security issue and fixes starting with buster dpkg, Closes: #928040 * Use --oknodo on start so that systemd doesn't fail if lprng is already running, Closes: #908770 Checksums-Sha1: ecfa3d51134d7e2d7dac3eddf78720ed96e1ee2c 1553 lprng_3.8.B-2.2.dsc a83f97d41471918b34a17cc9955d1501bde176c8 31884 lprng_3.8.B-2.2.debian.tar.xz Checksums-Sha256: 5fd70a48bb10a84e9326b815da057e55b5ab657a5e57f89526cd6031e74fb180 1553 lprng_3.8.B-2.2.dsc 63f6482b25aa5f5c449da5e028ee712786849ebec9abce2b7020ffdff11b8bbf 31884 lprng_3.8.B-2.2.debian.tar.xz Files: d364b36a9e2f85a4212bf4c280e89297 1553 net extra lprng_3.8.B-2.2.dsc ac5c73ec35a6ea0f6dddd77bd3be82f4 31884 net extra lprng_3.8.B-2.2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQEzBAEBCAAdFiEE9Li3nMNy++OFgPTCQe7SUh/WssoFAlzlUl0ACgkQQe7SUh/W ssqnvgf/SGIMifhI5xYmopRZp25qmJ/09i7JNmnDNZhI2WvK1Auy82zfIkVSIJOh BX8H6jQntsvHQFmcI8SXdKLAi6WgJ90IYxdfZSt6I4Dy3nnqIMxa8vPxRqEjGR2/ OUcq341BIwExBUakwfijZ8RjK7O9Y5W2+nHDXaDGJCWT/8nN28+yeVlILuxUNLWS qHNR0daRMCPmcqX5y5yW6HjNF5N5VT8fjEKKE4WYhv7qT+3KjkDIANFvrNHTtk/P jFYQb99gvZTVCbN9JGMwAh96XsKaLjtMS+aNQxf0OTNAxL1M++ufPJH9M7LYcHA3 FmEBr/kg64zEPm1bd4lp6mcIoTT4yw== =PFFS -----END PGP SIGNATURE-----
--- End Message ---
