Your message dated Sun, 07 Jul 2019 19:03:25 +0000 with message-id <[email protected]> and subject line Bug#929687: Removed package(s) from unstable has caused the Debian Bug report #531495, regarding [aes2501-wy] aes2501 reports "No device found" to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 531495: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=531495 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: aes2501-wy Version: 0.1-5 Severity: normal I use a Fujitsu Stylistic 5020D tablet which, according to lsusb, uses an AES2501 fingerprint scanner: Bus 004 Device 003: ID 08ff:2500 AuthenTec, Inc. AES2501 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 8 idVendor 0x08ff AuthenTec, Inc. idProduct 0x2500 AES2501 bcdDevice 6.13 iManufacturer 0 iProduct 1 Fingerprint Sensor iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) ... However, when I try to run aes2501, the output I get is: argc=1 Initializing, please standby... No device found If something needs to be configured, then this is a bug in the documentation (since there isn't any). If no configuration is needed, then this is a bug with the program. --- System information. --- Architecture: i386 Kernel: Linux 2.6.26-2-686 Debian Release: squeeze/sid 500 testing security.debian.org 500 testing mirror.csclub.uwaterloo.ca 500 testing debian.yorku.ca 1 experimental debian.yorku.ca --- Package information. --- Depends (Version) | Installed ======================-+-=========== libc6 (>= 2.7-1) | 2.9-12 Recommends (Version) | Installed ==========================-+-=========== imagemagick | 7:6.3.7.9.dfsg2-1 Package's Suggests field is empty.
--- End Message ---
--- Begin Message ---Version: 0.1-5+rm Dear submitter, as the package aes2501-wy has just been removed from the Debian archive unstable we hereby close the associated bug reports. We are sorry that we couldn't deal with your issue properly. For details on the removal, please see https://bugs.debian.org/929687 The version of this package that was in Debian prior to this removal can still be found using http://snapshot.debian.org/. This message was generated automatically; if you believe that there is a problem with it please contact the archive administrators by mailing [email protected]. Debian distribution maintenance software pp. Scott Kitterman (the ftpmaster behind the curtain)
--- End Message ---
