--- Begin Message ---
Package: drobo-utils
Version: 0.6.1+repack-1
Severity: normal
I was wondering why I have two 2 TiB LUNs showing up over Firewire, as
seen here:
# fdisk -s
/dev/sda: 488386584
/dev/sdb: 2147483580
/dev/sdc: 2147483580
total: 4783353744 blocks
When I installed drobo-utils, I found that the Drobo contains four 930
GiB disks, obviously in RAID 5 as per the total physical space reported
in the "query capacity result" section below. However, something is
obviously wrong because the second LUN should only be 751 GiB in size.
(In the "query luninfo result" section, a second LUN with ID 0 and size
0 is showing up in addition to the real one.)
See Peter Silva's comment at
https://groups.google.com/d/msg/drobo-talk/NF5YfvRP4d4/uyOoPErcuZAJ
Also, should I be worried that the real LUN's type shows as ['FAT32']
when it contains an ext3 filesystem?
See attached dmesg output.
# drobom info
---------------------------------------------------------
Info about Drobo Name: Drobo disk pack Devices:
/dev/sdb:/dev/sdc
---------------------------------------------------------
query config result:
(4, 16, 2199023185408L)
max lun size is: 2199023185408
query capacity result:
(807266607104L, 2182374301696L, 2989640908800L, 0)
Physical space... used: 2182374301696 free: 807266607104 Total:
2989640908800
query protocol version result:
(0, 11)
query settings result:
(1340161646, 8, 'Drobo disk pack')
Drobo time is Wed Jun 20 11:07:26 2012
query slotinfo result: number of slots: 4
[(0, 1000204886016L, 0, 'green', 'WDC WD10EACS-00ZJB0', 'WDC
WD10EACS-00Z'), (1, 1000204886016L, 0, 'green', 'WDC WD10EACS-00ZJB0',
'WDC WD10EACS-00Z'), (2, 1000204886016L, 0, 'green', 'WDC
WD10EADS-00L5B1', 'WDC WD10EADS-00L'), (3, 1000204886016L, 0, 'green',
'WDC WD10EACS-32D6B1', 'WDC WD10EACS-32D')]
query firmware result:
(1, 248, 15408, 13, 6, 'Dec 2 2008,10:24:08', 'ArmMarvell', '1.3.0',
['NO_AUTO_REBOOT', 'NO_FAT32_FORMAT', 'USED_CAPACITY_FROM_HOST',
'DISKPACKSTATUS', 'ENCRYPT_NOHEADER', 'CMD_STATUS_QUERIABLE',
'VARIABLE_LUN_SIZE_1_16', 'PARTITION_LUN_GPT_MBR',
'FAT32_FORMAT_VOLNAME', 'SUPPORTS_DROBOSHARE', 'SUPPORTS_NEW_LUNINFO2',
'feature x0800', 'feature x2000 '])
drobo says firmware revision: 1 . 248 ( 15408 ) was built: Dec 2
2008,10:24:08
query status result:
([], 0)
query options result:
{'RedThreshold': 95, 'YellowThreshold': 85}
query luninfo result:
(0, 2199023185920L, 2182374301696L, 'No Partitions', ['FAT32'])
(0, 0, 0, 'No Partitions', ['NTFS'])
---------------------------------------------------------
-- System Information:
Debian Release: 6.0.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to en_AU.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages drobo-utils depends on:
ii python 2.6.6-3+squeeze7 interactive high-level object-orie
ii python-support 1.0.10 automated rebuilding support for P
Versions of packages drobo-utils recommends:
ii parted 2.3-5 The GNU Parted disk partition resi
ii sudo 1.7.4p4-2.squeeze.3 Provide limited super user privile
Versions of packages drobo-utils suggests:
pn gparted <none> (no description available)
ii python-qt4 4.7.3-1+b1 Python bindings for Qt4
-- no debconf information
[ 0.975832] firewire_ohci: Added fw-ohci device 0000:03:09.0, OHCI version
1.10
[ 1.476566] firewire_core: created device fw0: GUID 0001080000017a2b, S800
[ 1.478211] firewire_core: created device fw1: GUID 001a620282721064, S800
[ 1.478215] firewire_core: phy config: card 0, new root=ffc0, gap_count=5
[ 2.601328] udev[347]: starting version 164
[ 2.959116] scsi4 : SBP-2 IEEE-1394
[ 3.157227] firewire_sbp2: fw1.0: logged in to LUN 0000 (0 retries)
[ 3.159361] scsi 4:0:0:0: Direct-Access TRUSTED Mass Storage 2.00
PQ: 0 ANSI: 5
[ 3.159473] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.160302] firewire_sbp2: fw1.0: logged in to LUN 0001 (0 retries)
[ 3.165694] sd 4:0:0:0: [sdb] 4294967160 512-byte logical blocks: (2.19
TB/1.99 TiB)
[ 3.167696] scsi 4:0:0:1: Direct-Access TRUSTED Mass Storage 2.00
PQ: 0 ANSI: 5
[ 3.167790] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 3.169613] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.169616] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 3.170368] sd 4:0:0:1: [sdc] 4294967160 512-byte logical blocks: (2.19
TB/1.99 TiB)
[ 3.172329] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
supports DPO and FUA
[ 3.174195] sd 4:0:0:1: [sdc] Write Protect is off
[ 3.174198] sd 4:0:0:1: [sdc] Mode Sense: 03 00 00 00
[ 3.176876] sd 4:0:0:1: [sdc] Write cache: disabled, read cache: enabled,
supports DPO and FUA
[ 3.181307] sdb:ACPI: SSDT bddb00f0 00382 (v01 DpgPmm P001Ist 00000011
INTL 20051117)
[ 3.305058] ACPI: SSDT bddb0480 00513 (v01 PmRef P001Cst 00003001 INTL
20051117)
[ 9.766999] unknown partition table
[ 9.767596] sdc: unknown partition table
[ 9.776968] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 9.807270] sd 4:0:0:1: [sdc] Attached SCSI disk
--- End Message ---