Your message dated Sun, 10 May 2020 16:28:00 +0300 with message-id <[email protected]> and subject line Re: qemu-kvm: cannot boot a wheezy guest with SMP and less than 927 MB of RAM has caused the Debian Bug report #684775, regarding cannot boot a wheezy guest with SMP and less than 927 MB of RAM on 32bit host to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 684775: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=684775 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: qemu-kvm Version: 1.1.0+dfsg-3 Severity: normal Dear Maintainer, after upgrading the host system from squeeze to wheezy a guest system with wheezy does not boot anymore. Before the upgrade the same guest system was running without problems with the following options (with squeeze as host system): $ kvm -smp 2 -m 512 -drive file=/local/kvm/wheezy.img,index=0,media=disk When I disable the smp option the guest system also boots with wheezy as host system. It even boots successfully with very low RAM settings: $ kvm -m 48 -curses -drive file=/local/kvm/wheezy.img,index=0,media=disk # free total used free shared buffers cached Mem: 43388 38856 4532 0 2588 20328 -/+ buffers/cache: 15940 27448 Swap: 489944 132 489812 When I enable the smp option with wheezy as host system I have to give the same wheezy guest system at least 927 MB of RAM to be able to boot: $ kvm -smp 2 -m 927 -curses -drive file=/local/kvm/wheezy.img,index=0,media=disk # free total used free shared buffers cached Mem: 935632 47060 888572 0 2932 24264 -/+ buffers/cache: 19864 915768 Swap: 489944 0 489944 If I supply less than 927 MB of RAM the guest boot fails with the following error messages: $ kvm -smp 2 -m 926 -curses -drive file=/local/kvm/wheezy.img,index=0,media=disk Loading, please wait...20120603_194846-gandalf) modprobe: module unix not found in modules.dep [ 28.008023] BUG: soft lockup - CPU#0 stuck for 23s! [busybox:155] [ 28.008402] Process busybox (pid: 155, ti=f72ca000 task=f710d6a0 task.ti=f72c a000)(http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+39DC9CA0+39D89CA0 C900 [ 28.008733] Stack: [ 28.008899] Call Trace: [ 28.009172] Code: 0f 30 31 c0 57 89 c6 53 6a 00 55 68 43 d1 35 c1 e8 ad 6f 29 00 89 f0 83 c4 14 5b 5e 5f 5d c3 90 56 89 c6 53 89 d3 8b 00 8b 56 04 <f0> 0f c7 0e 75 fa 5b 5e c3 9c 58 c3 50 9d c3 fa c3 fb c3 fb f4 If I reduce the memory further the error messages slightly change: $ kvm -smp 2 -m 925 -curses -drive file=/local/kvm/wheezy.img,index=0,media=disk Loading, please wait...20120603_194846-gandalf) [ 28.008015] BUG: soft lockup - CPU#0 stuck for 23s! [modprobe:119] [ 28.008373] Process modprobe (pid: 119, ti=f728c000 task=f7262900 task.ti=f72 8c000) [ 28.008709] Stack:) 00:03.0 C900 PCI2.10 PnP PMM+39CC9CA0+39C89CA0 C900 [ 28.008875] Call Trace: [ 28.009119] Code: 0f 30 31 c0 57 89 c6 53 6a 00 55 68 43 d1 35 c1 e8 ad 6f 29 00 89 f0 83 c4 14 5b 5e 5f 5d c3 90 56 89 c6 53 89 d3 8b 00 8b 56 04 <f0> 0f c7 0e 75 fa 5b 5e c3 9c 58 c3 50 9d c3 fa c3 fb c3 fb f4 [ 28.024012] BUG: soft lockup - CPU#1 stuck for 23s! [modprobe:62] [ 28.024324] Process modprobe (pid: 62, ti=f70e2000 task=f70bf240 task.ti=f70e 2000) [ 28.024653] Stack: [ 28.024819] Call Trace: [ 28.025016] Code: f0 ff 08 79 05 e8 44 6d 10 00 c3 f0 81 28 00 00 10 00 74 05 e8 19 6d 10 00 c3 ba 00 01 00 00 f0 66 0f c1 10 0f b6 ce 38 ca 74 06 <f3> 90 8a 10 eb f6 c3 53 66 8b 10 89 c1 31 c0 38 d6 75 16 8d 9a $ kvm -smp 2 -m 924 -curses -drive file=/local/kvm/wheezy.img,index=0,media=disk Loading, please wait...20120603_194846-gandalf) [ 28.008012] BUG: soft lockup - CPU#0 stuck for 23s! [modprobe:120] [ 28.008373] Process modprobe (pid: 120, ti=f7264000 task=f63e4560 task.ti=f72 64000) [ 28.008733] Stack:) 00:03.0 C900 PCI2.10 PnP PMM+39BC9CA0+39B89CA0 C900 [ 28.008900] Call Trace: [ 28.009141] Code: 0f 30 31 c0 57 89 c6 53 6a 00 55 68 43 d1 35 c1 e8 ad 6f 29 00 89 f0 83 c4 14 5b 5e 5f 5d c3 90 56 89 c6 53 89 d3 8b 00 8b 56 04 <f0> 0f c7 0e 75 fa 5b 5e c3 9c 58 c3 50 9d c3 fa c3 fb c3 fb f4 [ 28.028012] BUG: soft lockup - CPU#1 stuck for 23s! [modprobe:67] [ 28.028343] Process modprobe (pid: 67, ti=f70ec000 task=f70be620 task.ti=f70e c000) [ 28.028672] Stack: [ 28.028839] Call Trace: [ 28.029040] Code: 05 e8 44 6d 10 00 c3 f0 81 28 00 00 10 00 74 05 e8 19 6d 10 00 c3 ba 00 01 00 00 f0 66 0f c1 10 0f b6 ce 38 ca 74 06 f3 90 8a 10 <eb> f6 c3 53 66 8b 10 89 c1 31 c0 38 d6 75 16 8d 9a 00 01 00 00 $ kvm -smp 2 -m 923 -curses -drive file=/local/kvm/wheezy.img,index=0,media=disk Loading, please wait...20120603_194846-gandalf) [ 28.008014] BUG: soft lockup - CPU#0 stuck for 23s! [modprobe:113] [ 28.008368] Process modprobe (pid: 113, ti=f725a000 task=f72110c0 task.ti=f72 5a000) [ 28.008706] Stack:) 00:03.0 C900 PCI2.10 PnP PMM+39AC9CA0+39A89CA0 C900 [ 28.008871] Call Trace: [ 28.009112] Code: 0f 30 31 c0 57 89 c6 53 6a 00 55 68 43 d1 35 c1 e8 ad 6f 29 00 89 f0 83 c4 14 5b 5e 5f 5d c3 90 56 89 c6 53 89 d3 8b 00 8b 56 04 <f0> 0f c7 0e 75 fa 5b 5e c3 9c 58 c3 50 9d c3 fa c3 fb c3 fb f4 [ 28.028012] BUG: soft lockup - CPU#1 stuck for 23s! [udevd:118] [ 28.028316] Process udevd (pid: 118, ti=f7284000 task=f72148c0 task.ti=f72840 00) [ 28.028637] Stack: [ 28.028802] Call Trace: [ 28.028991] Code: 08 79 05 e8 44 6d 10 00 c3 f0 81 28 00 00 10 00 74 05 e8 19 6d 10 00 c3 ba 00 01 00 00 f0 66 0f c1 10 0f b6 ce 38 ca 74 06 f3 90 <8a> 10 eb f6 c3 53 66 8b 10 89 c1 31 c0 38 d6 75 16 8d 9a 00 01 $ kvm -smp 2 -m 922 -curses -drive file=/local/kvm/wheezy.img,index=0,media=disk Loading, please wait...20120603_194846-gandalf) [ 28.008013] BUG: soft lockup - CPU#0 stuck for 23s! [udevd:117] [ 28.008368] Process udevd (pid: 117, ti=f723c000 task=f70e6200 task.ti=f723c0 00) [ 28.008691] Stack:) 00:03.0 C900 PCI2.10 PnP PMM+399C9CA0+39989CA0 C900 [ 28.008855] Call Trace: [ 28.009066] Code: 08 79 05 e8 44 6d 10 00 c3 f0 81 28 00 00 10 00 74 05 e8 19 6d 10 00 c3 ba 00 01 00 00 f0 66 0f c1 10 0f b6 ce 38 ca 74 06 f3 90 <8a> 10 eb f6 c3 53 66 8b 10 89 c1 31 c0 38 d6 75 16 8d 9a 00 01 [ 28.024138] BUG: soft lockup - CPU#1 stuck for 23s! [modprobe:110] [ 28.024451] Process modprobe (pid: 110, ti=f7238000 task=f71ea040 task.ti=f72 38000) [ 28.024781] Stack: [ 28.024945] Call Trace: [ 28.025157] Code: 0f 30 31 c0 57 89 c6 53 6a 00 55 68 43 d1 35 c1 e8 ad 6f 29 00 89 f0 83 c4 14 5b 5e 5f 5d c3 90 56 89 c6 53 89 d3 8b 00 8b 56 04 <f0> 0f c7 0e 75 fa 5b 5e c3 9c 58 c3 50 9d c3 fa c3 fb c3 fb f4 The host system has 2 cores (Core2 Duo) with 8 GB of RAM. The VM image is in qcow2 format if that matters: $ qemu-img info /local/kvm/wheezy.img image: /local/kvm/wheezy.img file format: qcow2 virtual size: 10G (10737418240 bytes) disk size: 2.4G cluster_size: 65536 Regards, Uwe -- Package-specific info: /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping : 10 microcode : 0xa07 cpu MHz : 1998.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 6317.29 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping : 10 microcode : 0xa07 cpu MHz : 1998.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 6317.46 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (1750, 'testing'), (650, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages qemu-kvm depends on: ii adduser 3.113+nmu3 ii ipxe-qemu 1.0.0+git-20120202.f6840ba-3 ii libaio1 0.3.109-3 ii libasound2 1.0.25-3 ii libbluetooth3 4.99-2 ii libbrlapi0.5 4.4-4 ii libc6 2.13-33 ii libcurl3-gnutls 7.26.0-1 ii libglib2.0-0 2.32.3-1 ii libgnutls26 2.12.20-1 ii libiscsi1 1.4.0-3 ii libjpeg8 8d-1 ii libncurses5 5.9-10 ii libpng12-0 1.2.49-1 ii libpulse0 2.0-3 ii libsasl2-2 2.1.25.dfsg1-4+b1 ii libsdl1.2debian 1.2.15-5 ii libspice-server1 0.11.0-1 ii libtinfo5 5.9-10 ii libusbredirparser0 0.4.3-2 ii libuuid1 2.20.1-5.1 ii libvdeplug2 2.3.2-4 ii libx11-6 2:1.5.0-1 ii python 2.7.3~rc2-1 ii qemu-keymaps 1.1.0+dfsg-1 ii qemu-utils 1.1.0+dfsg-1 ii seabios 1.7.0-1 ii vgabios 0.7a-3 ii zlib1g 1:1.2.7.dfsg-13 Versions of packages qemu-kvm recommends: ii bridge-utils 1.5-4 ii iproute 20120521-3 Versions of packages qemu-kvm suggests: ii debootstrap 1.0.42 pn samba <none> ii vde2 2.3.2-4 -- no debconf information
--- End Message ---
--- Begin Message ---Version: 1:5.0-1 (actually sending to the right address)
--- End Message ---
