Your message dated Fri, 19 May 2006 12:39:32 -0500
with message-id <[EMAIL PROTECTED]>
and subject line closing on submitter request
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: smartmontools
Version: 5.32-3
Severity: normal
Subject: smartmontools reads NOT raw values
-- Package-specific info:
Ouput of /usr/share/bug/smartmontools:
# CONFIG_IDE_TASK_IOCTL is not set
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.4.27ltspke9-nf2-v07c-utf8-sata-ehci-experimental
Locale: LANG=sk_SK.UTF-8, LC_CTYPE=sk_SK.UTF-8 (charmap=UTF-8) (ignored:
LC_ALL set to sk_SK.UTF-8)
Versions of packages smartmontools depends on:
ii libc6 2.3.2.ds1-22sarge3 GNU C Library: Shared
libraries an
-- no debconf information
In my syslog is always:
May 18 06:14:45 ltsp smartd[7749]: Device: /dev/hda, SMART Usage
Attribute: 194 Temperature_Celsius changed from 117 to 114
So I changed my smartd.conf to:
from:
DEVICESCAN
/dev/hda -a -o on -S on -s (S/../.././02|L/../../6/03)
to:
DEVICESCAN
/dev/hda -R 194 -a -o on -S on -s (S/../.././02|L/../../7/03
(all other lines are default=commented)
but nothing change in syslog - I've got the same message!
Yes, I did:
/etc/init.d/smartmontools stop; sleep 15
/etc/init.d/smartmontools start
As you can see below, HDD is about 47-50 Celsium degrees {smartlctl -a}
The obly problem is smartd is NOT reading correctly this value even in
case you order him to read the RAW value.
=====================
$ smartctl -i /dev/hda
I think you will find this info usefull:
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: IC35L120AVV207-1
Serial Number: VNVD01G4C3KS7G
Firmware Version: V24OA63A
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
Local Time is: Fri May 19 13:38:35 2006 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=====================
$ smartctl -a /dev/hda
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: IC35L120AVV207-1
Serial Number: VNVD01G4C3KS7G
Firmware Version: V24OA63A
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
Local Time is: Fri May 19 13:38:48 2006 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an
interrupting command from host.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: (2855) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail
Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail
Offline - 0
3 Spin_Up_Time 0x0007 113 113 024 Pre-fail
Always - 239 (Average 245)
4 Start_Stop_Count 0x0012 100 100 000 Old_age
Always - 184
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail
Offline - 38
9 Power_On_Hours 0x0012 098 098 000 Old_age
Always - 19052
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 183
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always
- 414
193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always
- 414
194 Temperature_Celsius 0x0002 114 114 000 Old_age Always
- 48 (Lifetime Min/Max 15/59)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 18411
-
# 2 Short offline Completed without error 00% 18382
-
Device does not support Selective Self Tests/Logging
Thanks for smartmontools.
Thanks for Debian (best ever) distro.
Thanks to all Debian package managers.
--
Jan Kunder
jan.kunderHATESPAMgmail.com
--- End Message ---
--- Begin Message ---
Cheers,
-- Guido
--- End Message ---
