Your message dated Sat, 24 Apr 2021 06:21:41 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #680767,
regarding linux-image-3.2.0-3-686-pae: Fancontrol randomly working [EeePc
1000he]
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
680767: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680767
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src
Version: 3.2.21-3
Severity: normal
Dear Mantainers,
after the last kernel update (Debian Sid, v. 3.2.21-3) fancontrol works
randomly.
The problem depends on the fact that the hwmon sensor alternates, at every
boot, his path between /sys/devices/platform/eeepc/hwmon/hwmon1
and /sys/devices/platform/eeepc/hwmon/hwmon2.
The only solution would be to reconfigure the fancontrol every time, but it
is clear that this solution is extremely annoying.
Here is my current /etc/fancontrol:
# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=hwmon0= hwmon2=devices/platform/eeepc
DEVNAME=hwmon0=acpitz hwmon2=eeepc
FCTEMPS=hwmon2/pwm1=hwmon0/temp1_input
FCFANS= hwmon2/pwm1=hwmon2/fan1_input
MINTEMP=hwmon2/pwm1=54
MAXTEMP=hwmon2/pwm1=70
MINSTART=hwmon2/pwm1=150
MINSTOP=hwmon2/pwm1=20
When the sensor is recognized as hwmon1, obviously fancontrol does not work.
I hope I was clear and I apologize for my bad English
Hi and thank you very much,
Domenico
-- Package-specific info:
** Version:
Linux version 3.2.0-3-686-pae (Debian 3.2.21-3)
([email protected]) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP
Thu Jun 28 08:56:46 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae
root=UUID=d7ca4739-5c84-4af1-8ed6-423a8891fa17 ro quiet
** Not tainted
** Kernel log:
[ 21.056118] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 21.103080] input: Asus EeePC extra buttons as
/devices/platform/eeepc/input/input6
[ 21.114132] composite sync not supported
[ 21.209569] WARNING! power/level is deprecated; use power/control instead
[ 21.328705] Linux media interface: v0.10
[ 21.358963] Linux video capture interface: v2.00
[ 21.392804] [drm] initialized overlay support
[ 21.392852] composite sync not supported
[ 21.405364] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 21.414148] fbcon: inteldrmfb (fb0) is primary device
[ 21.422651] input: CNF7129 as
/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7
[ 21.422931] usbcore: registered new interface driver uvcvideo
[ 21.422937] USB Video Class driver (1.1.1)
[ 21.505031] eeepc_laptop: BIOS says wireless lan is blocked, but the pci
device is present
[ 21.505039] eeepc_laptop: skipped wireless hotplug as probably inappropriate
for this model
[ 21.505407] eeepc_laptop: Unable to find port
[ 21.592248] psmouse serio1: elantech: assuming hardware version 2 (with
firmware version 0x020030)
[ 21.664091] psmouse serio1: elantech: Synaptics capabilities query result
0x00, 0x02, 0x64.
[ 21.865473] Console: switching to colour frame buffer device 128x37
[ 21.875169] fb0: inteldrmfb frame buffer device
[ 21.875174] drm: registered panic notifier
[ 21.876434] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.876539] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 21.876687] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 21.876753] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 21.889603] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input8
[ 21.988973] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input9
[ 21.992615] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 21.992951] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 25.215176] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1
across:2096444k
[ 25.707289] EXT3-fs (sda5): using internal journal
[ 25.972490] fuse init (API version 7.17)
[ 28.421468] kjournald starting. Commit interval 5 seconds
[ 28.422292] EXT3-fs (sda7): using internal journal
[ 28.422307] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 29.685574] RPC: Registered named UNIX socket transport module.
[ 29.685584] RPC: Registered udp transport module.
[ 29.685591] RPC: Registered tcp transport module.
[ 29.685596] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 29.781976] FS-Cache: Loaded
[ 29.858447] FS-Cache: Netfs 'nfs' registered for caching
[ 29.899864] Installing knfsd (copyright (C) 1996 [email protected]).
[ 32.505640] apm: BIOS not found.
[ 32.946525] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 33.202411] Bluetooth: Core ver 2.16
[ 33.202479] NET: Registered protocol family 31
[ 33.202486] Bluetooth: HCI device and connection manager initialized
[ 33.202496] Bluetooth: HCI socket layer initialized
[ 33.202502] Bluetooth: L2CAP socket layer initialized
[ 33.203246] Bluetooth: SCO socket layer initialized
[ 33.216687] Bluetooth: RFCOMM TTY layer initialized
[ 33.216704] Bluetooth: RFCOMM socket layer initialized
[ 33.216711] Bluetooth: RFCOMM ver 1.11
[ 33.270330] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.270340] Bluetooth: BNEP filters: protocol multicast
[ 33.586171] composite sync not supported
[ 33.616322] composite sync not supported
[ 33.620975] lp: driver loaded but no devices found
[ 33.630795] ppdev: user-space parallel port driver
[ 34.138844] ATL1E 0000:03:00.0: irq 44 for MSI/MSI-X
[ 34.139704] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.380068] usbcore: deregistering interface driver uvcvideo
[ 34.578054] usb 1-8: USB disconnect, device number 2
[ 45.829946] composite sync not supported
[ 45.864746] composite sync not supported
[ 65.984844] pci 0000:01:00.0: [168c:002a] type 0 class 0x000280
[ 65.984900] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
[ 65.985101] pci 0000:01:00.0: supports D1
[ 65.985110] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 65.985125] pci 0000:01:00.0: PME# disabled
[ 65.985185] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf800ffff
64bit]
[ 65.985210] pci 0000:01:00.0: BAR 0: set to [mem 0xf8000000-0xf800ffff
64bit] (PCI address [0xf8000000-0xf800ffff])
[ 66.151667] cfg80211: Calling CRDA to update world regulatory domain
[ 66.374972] ath9k 0000:01:00.0: enabling device (0000 -> 0002)
[ 66.374994] ath9k 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 66.375022] ath9k 0000:01:00.0: setting latency timer to 64
[ 66.805556] ath: EEPROM regdomain: 0x60
[ 66.805562] ath: EEPROM indicates we should expect a direct regpair map
[ 66.805571] ath: Country alpha2 being used: 00
[ 66.805575] ath: Regpair used: 0x60
[ 66.862216] ieee80211 phy0: Selected rate control algorithm
'ath9k_rate_control'
[ 66.863905] Registered led device: ath9k-phy0
[ 66.863932] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8b60000, irq=19
[ 66.953210] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 69.436083] wlan0: authenticate with 38:22:9d:2f:f5:a4 (try 1)
[ 69.438153] wlan0: authenticated
[ 69.459209] wlan0: associate with 38:22:9d:2f:f5:a4 (try 1)
[ 69.461801] wlan0: RX AssocResp from 38:22:9d:2f:f5:a4 (capab=0x411 status=0
aid=2)
[ 69.461814] wlan0: associated
[ 69.462344] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 80.656068] wlan0: no IPv6 routers present
[ 5089.671624] composite sync not supported
[ 5089.704475] composite sync not supported
[ 5103.851380] composite sync not supported
[ 5103.884526] composite sync not supported
[ 5323.972152] /opt/texbin/bib[13196]: segfault at 0 ip b76ba394 sp bfe8b318
error 4 in libc-2.13.so[b759c000+156000]
[ 5736.633869] composite sync not supported
[ 5736.664433] composite sync not supported
[ 5744.710313] composite sync not supported
[ 5744.832220] composite sync not supported
** Model information
not available
** Loaded modules:
arc4
ath9k
ath9k_common
ath9k_hw
ath
mac80211
cfg80211
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
crc16
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
cpufreq_stats
autofs4
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
fuse
snd_hda_codec_realtek
joydev
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
psmouse
i915
snd_seq_device
snd_timer
coretemp
snd
serio_raw
drm_kms_helper
drm
iTCO_wdt
iTCO_vendor_support
soundcore
eeepc_laptop
acpi_cpufreq
mperf
rng_core
evdev
sparse_keymap
battery
video
processor
button
i2c_algo_bit
i2c_core
ac
rfkill
power_supply
ext3
mbcache
jbd
sd_mod
crc_t10dif
ata_generic
ata_piix
libata
scsi_mod
thermal
thermal_sys
uhci_hcd
ehci_hcd
atl1e
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory
Controller Hub [8086:27ac] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE
Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:834a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 7fa00000-7fbfffff
Prefetchable memory behind bridge: 000000007fc00000-000000007fdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 000000007f800000-000000007f9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family)
SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 Network controller [0280]: Atheros Communications Inc. AR928X Wireless
Network Adapter (PCI-Express) [168c:002a] (rev 01)
Subsystem: AzureWave AW-NE771 802.11bgn Wireless Mini PCIe Card
[AR9281] [1a3b:1067]
Physical Slot: eeepc-wifi
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:00.0 Ethernet controller [0200]: Atheros Communications Inc.
AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-686-pae depends on:
ii debconf [debconf-2.0] 1.5.45
ii initramfs-tools [linux-initramfs-tool] 0.106
ii kmod 9-1
ii linux-base 3.5
ii module-init-tools 9-1
Versions of packages linux-image-3.2.0-3-686-pae recommends:
ii firmware-linux-free 3.1
ii libc6-i686 2.13-34
Versions of packages linux-image-3.2.0-3-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-686-pae/prerm/removing-running-kernel-3.2.0-3-686-pae:
true
linux-image-3.2.0-3-686-pae/postinst/depmod-error-initrd-3.2.0-3-686-pae:
false
linux-image-3.2.0-3-686-pae/postinst/missing-firmware-3.2.0-3-686-pae:
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
