Your message dated Sat, 24 Apr 2021 06:51:53 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #683111,
regarding linux-image-3.2.0-3-686-pae: kerneloops at genhd.c:1573
disk_clear_events+0xa7/0xd6()
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
683111: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=683111
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src
Version: 3.2.21-3
Severity: normal
kerneloops with details included in the (automatic) logs below.
This looks as if it happened after hot plugging a usb stick. This same
usb drive is in regular use (hot plugging) and has not caused problems
before.
---------------------------------------------------------
-- Package-specific info:
** Version:
Linux version 3.2.0-3-686-pae (Debian 3.2.21-3)
([email protected]) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP
Thu Jun 28 08:56:46 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae
root=UUID=b0e0725b-0ebb-4a27-964d-75eb6e73e069 ro elevator=noop
enable_mtrr_cleanup
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 5.102296] Registered led device: ath5k-phy0::rx
[ 5.102401] Registered led device: ath5k-phy0::tx
[ 5.102439] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 5.194918] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 5.225612] cfg80211: World regulatory domain updated:
[ 5.230158] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 5.234784] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 5.234932] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 5.234998] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 5.240783] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 5.246249] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might
be trying access hardware directly.
[ 5.251748] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 5.257212] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 5.262559] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 5.267919] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 5.304918] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input8
[ 5.321331] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.328278] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.444060] psmouse serio2: synaptics: Advanced gesture mode init failed.
[ 6.257307] input: PS/2 Synaptics TouchPad as
/devices/platform/i8042/serio2/input/input11
[ 6.556673] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.422742] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.496649] device-mapper: uevent: version 1.0.3
[ 7.500764] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
[email protected]
[ 7.760765] loop: module loaded
[ 9.637697] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts:
(null)
[ 10.847127] RPC: Registered named UNIX socket transport module.
[ 10.850790] RPC: Registered udp transport module.
[ 10.854408] RPC: Registered tcp transport module.
[ 10.858020] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.882933] FS-Cache: Loaded
[ 10.917937] FS-Cache: Netfs 'nfs' registered for caching
[ 10.937952] Installing knfsd (copyright (C) 1996 [email protected]).
[ 11.431238] fuse init (API version 7.17)
[ 13.765447] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 17.168772] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x208
[ 17.183496] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x208
[ 17.199047] microcode: Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
[ 17.356010] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 17.364848] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 17.905074] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 17.909371] NFSD: starting 90-second grace period
[ 18.985582] r8169 0000:02:00.0: PME# enabled
[ 19.496466] ata2.00: configured for UDMA/100
[ 19.503404] ata2: EH complete
[ 19.511257] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 53.240305] r8169 0000:02:00.0: PME# disabled
[ 108.628100] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 108.763693] usb 1-2: New USB device found, idVendor=090c, idProduct=1000
[ 108.763714] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 108.763728] usb 1-2: Product: USB 2.0 Flash Drive
[ 108.763738] usb 1-2: Manufacturer: Super Talent Flash
[ 108.763749] usb 1-2: SerialNumber: 13000000000000005672
[ 108.795534] usbcore: registered new interface driver uas
[ 108.805971] Initializing USB Mass Storage driver...
[ 108.806334] scsi2 : usb-storage 1-2:1.0
[ 108.806641] usbcore: registered new interface driver usb-storage
[ 108.806650] USB Mass Storage support registered.
[ 109.805263] scsi 2:0:0:0: Direct-Access Flash/SM Super Talent 2.0 2040
PQ: 0 ANSI: 0 CCS
[ 109.814369] sd 2:0:0:0: [sdb] 1014784 512-byte logical blocks: (519 MB/495
MiB)
[ 109.815359] sd 2:0:0:0: [sdb] Write Protect is off
[ 109.815386] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 109.816404] sd 2:0:0:0: [sdb] No Caching mode page present
[ 109.816426] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 109.826063] sd 2:0:0:0: [sdb] No Caching mode page present
[ 109.826076] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 109.877082] sdb: sdb1 sdb2
[ 109.883216] sd 2:0:0:0: [sdb] No Caching mode page present
[ 109.883236] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 109.883252] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 110.230228] ------------[ cut here ]------------
[ 110.230248] WARNING: at
/build/buildd-linux_3.2.21-3-i386-vEohn4/linux-3.2.21/block/genhd.c:1573
disk_clear_events+0xa7/0xd6()
[ 110.230255] Hardware name: AOA110
[ 110.230259] Modules linked in: usb_storage uas snd_hrtimer microcode
cpufreq_powersave cpufreq_userspace cpufreq_stats cpufreq_conservative uinput
fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop dm_crypt dm_mod
snd_hda_codec_realtek snd_hda_intel snd_hda_codec i2c_i801 snd_hwdep
snd_pcm_oss snd_mixer_oss snd_pcm arc4 snd_page_alloc snd_seq_midi
snd_seq_midi_event snd_rawmidi uvcvideo videodev sparse_keymap ath5k media ath
snd_seq mac80211 acerhdf snd_seq_device coretemp snd_timer pcspkr cfg80211
psmouse serio_raw evdev rfkill iTCO_wdt iTCO_vendor_support jmb38x_ms rng_core
memstick snd i915 soundcore drm_kms_helper drm battery i2c_algo_bit wmi
acpi_cpufreq mperf i2c_core video ac power_supply button processor thermal_sys
ext4 crc16 jbd2 mbcache mmc_block sd_mod crc_t10dif ata_generic ata_piix libata
scsi_mod uhci_hcd ehci_hcd sdhci_pci sdhci usbcore r8169 mmc_core mii
usb_common [last unloaded: scsi_wait_scan]
[ 110.230440] Pid: 3968, comm: blkid Not tainted 3.2.0-3-686-pae #1
[ 110.230445] Call Trace:
[ 110.230457] [<c1037fcc>] ? warn_slowpath_common+0x68/0x79
[ 110.230466] [<c1154145>] ? disk_clear_events+0xa7/0xd6
[ 110.230475] [<c1037fea>] ? warn_slowpath_null+0xd/0x10
[ 110.230483] [<c1154145>] ? disk_clear_events+0xa7/0xd6
[ 110.230501] [<c10ed4e6>] ? check_disk_change+0x1a/0x40
[ 110.230520] [<f826328e>] ? sd_open+0xc6/0x164 [sd_mod]
[ 110.230528] [<c10ee298>] ? __blkdev_get+0x23e/0x334
[ 110.230540] [<c10ee517>] ? blkdev_get+0x189/0x253
[ 110.230550] [<c1120824>] ? fsnotify_perm+0x4e/0x5a
[ 110.230558] [<c10edc1f>] ? bd_acquire+0x20/0x89
[ 110.230567] [<c10ca6bf>] ? __dentry_open+0x17a/0x253
[ 110.230575] [<c10cb403>] ? nameidata_to_filp+0x3a/0x45
[ 110.230583] [<c10ee5e1>] ? blkdev_get+0x253/0x253
[ 110.230591] [<c10d54be>] ? do_last+0x4f8/0x513
[ 110.230599] [<c10d5780>] ? path_openat+0xa1/0x287
[ 110.230607] [<c10d5a0f>] ? do_filp_open+0x23/0x5c
[ 110.230616] [<c1029ee0>] ? should_resched+0x5/0x1e
[ 110.230626] [<c12be8b1>] ? _cond_resched+0x5/0x18
[ 110.230634] [<c10cb462>] ? do_sys_open+0x54/0xcd
[ 110.230642] [<c10cb4f9>] ? sys_open+0x1e/0x23
[ 110.230651] [<c12c409f>] ? sysenter_do_call+0x12/0x28
[ 110.230657] ---[ end trace e9bff05c2b56e4a3 ]---
[ 203.036585] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id:
0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[ 203.092812] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio2/input/input13
** Model information
not available
** Loaded modules:
joydev
psmouse
usb_storage
uas
snd_hrtimer
microcode
cpufreq_powersave
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
uinput
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
dm_crypt
dm_mod
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
i2c_i801
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
arc4
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
uvcvideo
videodev
sparse_keymap
ath5k
media
ath
snd_seq
mac80211
acerhdf
snd_seq_device
coretemp
snd_timer
pcspkr
cfg80211
serio_raw
evdev
rfkill
iTCO_wdt
iTCO_vendor_support
jmb38x_ms
rng_core
memstick
snd
i915
soundcore
drm_kms_helper
drm
battery
i2c_algo_bit
wmi
acpi_cpufreq
mperf
i2c_core
video
ac
power_supply
button
processor
thermal_sys
ext4
crc16
jbd2
mbcache
mmc_block
sd_mod
crc_t10dif
ata_generic
ata_piix
libata
scsi_mod
uhci_hcd
ehci_hcd
sdhci_pci
sdhci
usbcore
r8169
mmc_core
mii
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory
Controller Hub [8086:27ac] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE
Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 78480000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 60c0 [size=8]
Region 2: Memory at 60000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at 78500000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 78400000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 78540000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 77300000-783fffff
Prefetchable memory behind bridge: 0000000070000000-0000000070ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: 76300000-772fffff
Prefetchable memory behind bridge: 0000000071000000-00000000720fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 75200000-762fffff
Prefetchable memory behind bridge: 0000000072100000-00000000730fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 74100000-751fffff
Prefetchable memory behind bridge: 0000000073100000-00000000740fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 6080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 6060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 6040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 6020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 78544400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family)
SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 60a0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 6000 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at 71010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at 71000000 (64-bit, prefetchable) [size=64K]
Expansion ROM at 71020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x
Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 75200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
04:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host
Controller [197b:2382]
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 74100300 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 73100000 [disabled] [size=32K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
04:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host
Controller [197b:2381] (prog-if 01)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 74100200 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
04:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller
[197b:2383]
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 74100100 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms
04:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller
[197b:2384]
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 74100000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
Bus 001 Device 003: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya
Technology Corp.) 64MB QDI U2 DISK
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-686-pae depends on:
ii debconf [debconf-2.0] 1.5.44
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.2.0-3-686-pae recommends:
ii firmware-linux-free 3.1
ii libc6-i686 2.13-33
Versions of packages linux-image-3.2.0-3-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36
ii firmware-linux-nonfree 0.36
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-686-pae/prerm/removing-running-kernel-3.2.0-3-686-pae:
true
linux-image-3.2.0-3-686-pae/postinst/depmod-error-initrd-3.2.0-3-686-pae:
false
linux-image-3.2.0-3-686-pae/postinst/missing-firmware-3.2.0-3-686-pae:
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
