Your message dated Tue, 31 May 2022 17:11:12 +0200
with message-id <6388712.G0QQBjFxQf@bagend>
and subject line Re: linux-image-4.14.0-0.bpo.3-amd64: MCE / Hardware Error on
HPE Microserver G10/Opteron X3216
has caused the Debian Bug report #887936,
regarding linux-image-4.14.0-0.bpo.3-amd64: MCE / Hardware Error on HPE
Microserver G10/Opteron X3216
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
887936: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=887936
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 4.13.13-1~bpo9+1
Severity: important
Dear Maintainer,
On HPE Microserver Gen 10/AMD Opteron X3216 Debian 9 (original kernel) &
backported kernel 4.13.0-0.bpo.1-amd64 boot OK,
but 4.13.0-0.bpo.1-amd64 fails to noot:
- [0.085167] mce: [Hardware Error]: CPU 0, Machine Check 0: 0 Bank 4:
fe40a00008100a13
- [0.085167] mce: [Hardware Error]: TSC 0 ADDR 61ff244000 MISC d012001001000000
- [0.085167] mce: [Hardware error]: PROCESSOR 2: 660f01 TIME 1516559601 SOCKET
0 APIC 0 microcode 6006118
After this, the booting sequence begins from the beginning.
Reverting back to the previous kernel image 4.13 boots normally.
Infomation below is after succesfull boot to the old 4.13 kernel image.
-- Package-specific info:
** Version:
Linux version 4.13.0-0.bpo.1-amd64 ([email protected]) (gcc
version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Debian 4.13.13-1~bpo9+1
(2017-11-22)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.13.0-0.bpo.1-amd64
root=UUID=b271ec4f-f3b7-4a54-83a6-0f50d3b6e99d ro quiet
** Not tainted
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
sys_vendor: HPE
product_name: ProLiant MicroServer Gen10
product_version: Rev B
chassis_vendor: HPE
chassis_version: Default string
bios_vendor: American Megatrends Inc.
bios_version: 5.12
board_vendor: HPE
board_name: ProLiant MicroServer Gen10
board_version: 871721-001
** Loaded modules:
fuse
appletalk
ax25
ipx
p8023
p8022
psnap
llc
xfs
libcrc32c
hid_generic
usbhid
amd64_edac_mod
edac_mce_amd
kvm_amd
amdkfd
evdev
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
amdgpu
snd_hda_codec_hdmi
ttm
ghash_clmulni_intel
pcspkr
fam15h_power
snd_hda_intel
drm_kms_helper
snd_hda_codec
snd_hda_core
sg
snd_hwdep
snd_pcm
drm
i2c_algo_bit
mfd_core
k10temp
snd_timer
snd
soundcore
sp5100_tco
shpchp
video
acpi_cpufreq
button
parport_pc
nfsd
ppdev
auth_rpcgss
nfs_acl
lockd
grace
lp
parport
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
sd_mod
crc32c_intel
aesni_intel
aes_x86_64
crypto_simd
cryptd
glue_helper
xhci_pci
ehci_pci
ehci_hcd
xhci_hcd
i2c_piix4
usbcore
usb_common
tg3
ptp
pps_core
ahci
libahci
libphy
libata
scsi_mod
i2c_hid
hid
i2c_designware_platform
i2c_designware_core
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device
[1022:1576]
Subsystem: Advanced Micro Devices, Inc. [AMD] Device [1022:1576]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Carrizo [1002:9874] (rev 87) (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Carrizo [1002:1871]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 37
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f0000000 (64-bit, prefetchable) [size=8M]
Region 4: I/O ports at f000 [size=256]
Region 5: Memory at feb00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: amdgpu
Kernel modules: amdgpu
00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Kabini
HDMI/DP Audio [1002:9840]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
[1002:9840]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 35
Region 0: Memory at feb64000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device
[1022:157b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:02.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device
[1022:157c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.5 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device
[1022:157c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000f0800000-00000000f08fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:03.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device
[1022:157b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:08.0 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Device
[1022:1578]
Subsystem: Advanced Micro Devices, Inc. [AMD] Device [1022:1578]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0900000 (64-bit, prefetchable) [size=128K]
Region 2: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Region 3: Memory at feb6f000 (32-bit, non-prefetchable) [size=4K]
Region 5: Memory at feb6a000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
00:09.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device
[1022:157d]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI
Controller [1022:7914] (rev 20) (prog-if 30 [XHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller
[1022:7914]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb68000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA
Controller [AHCI mode] [1022:7901] (rev 49) (prog-if 01 [AHCI 1.0])
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI
mode] [1022:7901]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f140 [size=8]
Region 1: I/O ports at f130 [size=4]
Region 2: I/O ports at f120 [size=8]
Region 3: I/O ports at f110 [size=4]
Region 4: I/O ports at f100 [size=16]
Region 5: Memory at feb6d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI
Controller [1022:7908] (rev 49) (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller
[1022:7908]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb6c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller
[1022:790b] (rev 4a)
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller
[1022:790b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge
[1022:790e] (rev 11)
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device
[1022:1570]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device
[1022:1571]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device
[1022:1572]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device
[1022:1573]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device
[1022:1574]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device
[1022:1575]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe
SATA 6Gb/s Controller [1b4b:9230] (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s
Controller [1b4b:9230]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at e050 [size=8]
Region 1: I/O ports at e040 [size=4]
Region 2: I/O ports at e030 [size=8]
Region 3: I/O ports at e020 [size=4]
Region 4: I/O ports at e000 [size=32]
Region 5: Memory at fea40000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fea00000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
02:00.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5720 Gigabit
Ethernet PCIe [14e4:165f]
Subsystem: Hewlett-Packard Company NetXtreme BCM5720 Gigabit Ethernet
PCIe [103c:22e8]
Physical Slot: 0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f0850000 (64-bit, prefetchable) [size=64K]
Region 2: Memory at f0840000 (64-bit, prefetchable) [size=64K]
Region 4: Memory at f0830000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fe940000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
02:00.1 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5720 Gigabit
Ethernet PCIe [14e4:165f]
Subsystem: Hewlett-Packard Company NetXtreme BCM5720 Gigabit Ethernet
PCIe [103c:22e8]
Physical Slot: 0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 30
Region 0: Memory at f0820000 (64-bit, prefetchable) [size=64K]
Region 2: Memory at f0810000 (64-bit, prefetchable) [size=64K]
Region 4: Memory at f0800000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fe900000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
** USB devices:
Bus 001 Device 010: ID 04b3:310c IBM Corp. Wheel Mouse
Bus 001 Device 009: ID 04b3:301b IBM Corp. SK-8815 Keyboard
Bus 001 Device 008: ID 04b3:301a IBM Corp. 2-port low-power hub
Bus 001 Device 007: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 9.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.13.0-0.bpo.1-amd64 (SMP w/2 CPU cores)
Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8),
LANGUAGE=fi_FI.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.13.0-0.bpo.1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.13.0-0.bpo.1-amd64 recommends:
ii apparmor 2.11.0-3
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2.3
Versions of packages linux-image-4.13.0-0.bpo.1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta3-5
pn linux-doc-4.13 <none>
Versions of packages linux-image-4.13.0-0.bpo.1-amd64 is related to:
ii firmware-amd-graphics 20161130-3
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
On Tuesday, 31 May 2022 14:01:00 CEST pekka leppanen wrote:
> My memory fails me: I ran the micro server on Debian 9 (Stable) successfully
> for a long time. I assume I had no issues & did regular OS updates.
>
> But when downgrading the noisy server for weekly backups installed Ubuntu
> (currently 5.4.0-110-generic #124-Ubuntu SMP Thu Apr 14 19:46:19 UTC 2022
> x86_64 x86_64 x86_64 GNU/Linux)
Thanks for reporting back :-)
Given that, I don't think it's useful to keep this bug open, so I'm closing
it.
signature.asc
Description: This is a digitally signed message part.
--- End Message ---
