Your message dated Thu, 20 Feb 2025 13:09:33 +0100 (CET) with message-id <[email protected]> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #961267, regarding Regression: usb quirks: 3x slower seq reads on 090c:1000 Silicon Motion based flash drives to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 961267: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=961267 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 4.19.118-2 Severity: normal Tags: upstream Dear Maintainer, * What led up to the situation? Applying the latest Debian stable updates. * What exactly did you do (or not do) that was effective (or ineffective)? Nothing. * What was the outcome of this action? 3-4 times slower sequential read performance. That is on 3 different USB3 sticks all using the above mentioned controller ID: - Samsung Flash Drive FIT, 32GB and 64GB - seq reads down from 150+ to under 50 MB/s - Intenso High Speed Line, 64GB - seq reads down from 300+ to under 100 MB/s * What outcome did you expect instead? Same as it was before the update, 150-300 MB/s. Tracked this down to the following commit: https://lkml.org/lkml/2020/3/10/422 Debian changelog: - usb: storage: Add quirk for Samsung Fit flash * Workaround: Removing the quirk (e.g. setting "options usb_storage quirks=090c:1000:" in /etc/modprobe.d) restores the previous performance levels. -- Package-specific info: ** Version: Linux version 4.19.0-9-amd64 ([email protected]) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.118-2 (2020-04-29) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 root=UUID=03da06a4-cb81-421b-a877-cf1afd5ef4b1 ro quiet splash ** Not tainted ** Kernel log: [ 6.367047] Bluetooth: HCI socket layer initialized [ 6.367052] Bluetooth: L2CAP socket layer initialized [ 6.367059] Bluetooth: SCO socket layer initialized [ 6.380684] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.391471] usbcore: registered new interface driver btusb [ 6.417648] Bluetooth: hci0: read Intel version: 370810011003110e32 [ 6.417650] Bluetooth: hci0: Intel device is already patched. patch num: 32 [ 6.422478] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (0bda:57cb) [ 6.453552] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.453556] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.453560] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 6.453562] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.453564] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.453568] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 6.453571] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 6.453574] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 6.458180] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 6.481453] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 6.487486] dell_smbios: Unable to run on non-Dell system [ 6.487659] iwlwifi 0000:01:00.0: base HW address: 18:5e:0f:0f:0c:3a [ 6.491916] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized! [ 6.491919] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized! [ 6.491921] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized! [ 6.492023] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9 [ 6.492128] usbcore: registered new interface driver uvcvideo [ 6.492129] USB Video Class driver (1.1.1) [ 6.520296] snd_hda_codec_realtek hdaudioC0D0: Failed to find dell wmi symbol dell_micmute_led_set [ 6.545924] intel_rapl: Found RAPL domain package [ 6.545928] intel_rapl: Found RAPL domain core [ 6.545930] intel_rapl: Found RAPL domain uncore [ 6.545931] intel_rapl: Found RAPL domain dram [ 6.560851] Adding 3684032k swap on /dev/sda10. Priority:-2 extents:1 across:3684032k SSFS [ 6.572637] XFS (sda5): Mounting V5 Filesystem [ 6.576186] XFS (sda8): Mounting V5 Filesystem [ 6.595142] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 6.596374] thermal thermal_zone9: failed to read out thermal zone (-61) [ 6.603067] XFS (sda8): Ending clean mount [ 6.603264] XFS (sda5): Ending clean mount [ 6.611653] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 6.649801] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 6.649919] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 6.650033] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 6.650136] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 6.650237] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 6.650340] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 6.767539] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 7.017873] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.017876] Bluetooth: BNEP filters: protocol multicast [ 7.017880] Bluetooth: BNEP socket layer initialized [ 7.387573] ahci 0000:00:17.0: port does not support device sleep [ 7.572572] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 7.690116] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 7.819994] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 7.954847] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 8.122650] tun: Universal TUN/TAP device driver, 1.6 [ 8.205945] virbr0: port 1(virbr0-nic) entered blocking state [ 8.205947] virbr0: port 1(virbr0-nic) entered disabled state [ 8.206062] device virbr0-nic entered promiscuous mode [ 8.464611] virbr0: port 1(virbr0-nic) entered blocking state [ 8.464614] virbr0: port 1(virbr0-nic) entered listening state [ 8.568159] virbr0: port 1(virbr0-nic) entered disabled state [ 11.260858] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 12.251746] wlp1s0: authenticate with 9c:b6:d0:d3:38:58 [ 12.259394] wlp1s0: send auth to 9c:b6:d0:d3:38:58 (try 1/3) [ 12.262208] wlp1s0: authenticated [ 12.263779] wlp1s0: associate with 9c:b6:d0:d3:38:58 (try 1/3) [ 12.266881] wlp1s0: RX AssocResp from 9c:b6:d0:d3:38:58 (capab=0x11 status=0 aid=1) [ 12.269150] wlp1s0: associated [ 12.309332] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 12.673985] FS-Cache: Loaded [ 12.711062] FS-Cache: Netfs 'nfs' registered for caching [ 12.994091] Bluetooth: RFCOMM TTY layer initialized [ 12.994104] Bluetooth: RFCOMM socket layer initialized [ 12.994112] Bluetooth: RFCOMM ver 1.11 [ 21.008761] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 21.008784] Bluetooth: HIDP socket layer initialized [ 21.013183] hid-generic 0005:046D:B016.0001: unknown main item tag 0x0 [ 21.013368] input: Bluetooth Mouse M336/M337/M535 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/bluetooth/hci0/hci0:256/0005:046D:B016.0001/input/input16 [ 21.013613] input: Bluetooth Mouse M336/M337/M535 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/bluetooth/hci0/hci0:256/0005:046D:B016.0001/input/input17 [ 21.013733] input: Bluetooth Mouse M336/M337/M535 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/bluetooth/hci0/hci0:256/0005:046D:B016.0001/input/input20 [ 21.014026] hid-generic 0005:046D:B016.0001: input,hidraw0: BLUETOOTH HID v12.03 Mouse [Bluetooth Mouse M336/M337/M535] on 18:5e:0f:0f:0c:3e [ 1135.701099] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1135.722430] usb 2-3: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00 [ 1135.722432] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1135.722452] usb 2-3: Product: Intenso High Speed Line [ 1135.722453] usb 2-3: Manufacturer: SMI [ 1135.722454] usb 2-3: SerialNumber: 19112500000332 [ 1135.812708] usb-storage 2-3:1.0: USB Mass Storage device detected [ 1135.814102] usb-storage 2-3:1.0: Quirks match for vid 090c pid 1000: 400 [ 1135.814148] scsi host2: usb-storage 2-3:1.0 [ 1135.814568] usbcore: registered new interface driver usb-storage [ 1135.825127] usbcore: registered new interface driver uas [ 1137.191138] scsi 2:0:0:0: Direct-Access Intenso High Speed Line 1100 PQ: 0 ANSI: 6 [ 1137.191518] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1137.191688] sd 2:0:0:0: [sdb] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB) [ 1137.191803] sd 2:0:0:0: [sdb] Write Protect is off [ 1137.191804] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 1137.191923] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1137.197195] sdb: sdb1 sdb2 sdb3 [ 1137.198077] sd 2:0:0:0: [sdb] Attached SCSI removable disk ** Model information sys_vendor: ASUSTeK COMPUTER INC. product_name: UX305CA product_version: 1.0 chassis_vendor: ASUSTeK COMPUTER INC. chassis_version: 1.0 bios_vendor: American Megatrends Inc. bios_version: UX305CA.300 board_vendor: ASUSTeK COMPUTER INC. board_name: UX305CA board_version: 1.0 ** Loaded modules: uas usb_storage hid_generic hidp rfcomm nfsv3 nfs_acl nfs lockd grace fscache ctr ccm nft_chain_route_ipv4 xt_CHECKSUM xt_conntrack ipt_REJECT nf_reject_ipv4 tun devlink cmac bnep xt_nat xt_tcpudp nft_counter ipt_MASQUERADE nft_compat nft_chain_nat_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc snd_hda_codec_hdmi snd_soc_skl arc4 intel_rapl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core snd_soc_acpi_intel_match dcdbas snd_soc_acpi dell_wmi_descriptor snd_soc_core iwlmvm snd_hda_codec_realtek x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_generic snd_compress uvcvideo coretemp mac80211 btusb btrtl btbcm btintel snd_hda_intel videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd_hda_codec kvm_intel snd_hda_core iwlwifi bluetooth videobuf2_common joydev snd_hwdep kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel videodev intel_cstate drbg snd_pcm snd_timer ansi_cprng media intel_uncore efi_pstore mei_me cfg80211 iTCO_wdt ecdh_generic asus_nb_wmi snd iTCO_vendor_support crc16 serio_raw pcspkr sg asus_wmi intel_rapl_perf sparse_keymap efivars soundcore rfkill mei idma64 processor_thermal_device intel_pch_thermal intel_soc_dts_iosf elan_i2c tpm_crb int3403_thermal int340x_thermal_zone tpm_tis tpm_tis_core tpm acpi_als kfifo_buf battery pcc_cpufreq ac industrialio evdev rng_core int3400_thermal acpi_thermal_rel acpi_pad asus_wireless vmwgfx ttm fuse parport_pc ppdev sunrpc lp parport efivarfs ip_tables x_tables autofs4 xfs libcrc32c crc32c_generic sd_mod i915 crc32c_intel ahci xhci_pci libahci xhci_hcd i2c_designware_platform i2c_designware_core i2c_algo_bit libata drm_kms_helper aesni_intel usbcore drm scsi_mod aes_x86_64 i2c_hid crypto_simd cryptd glue_helper hid i2c_i801 intel_lpss_pci intel_lpss mfd_core usb_common wmi thermal video button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:190c] (rev 08) Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [1043:1cfd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: skl_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 515 [8086:191e] (rev 07) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. HD Graphics 515 [1043:1cfd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 124 Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 08) Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [1043:1cfd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at df120000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: proc_thermal Kernel modules: processor_thermal_device 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP USB 3.0 xHCI Controller [1043:201f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 123 Region 0: Memory at df110000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21) Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Thermal subsystem [1043:1cfd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at df138000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel_pch_thermal Kernel modules: intel_pch_thermal 00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21) Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Serial IO I2C Controller [1043:1cfd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at df137000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel-lpss Kernel modules: intel_lpss_pci 00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21) Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Serial IO I2C Controller [1043:1cfd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at df136000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel-lpss Kernel modules: intel_lpss_pci 00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21) Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP CSME HECI [1043:1cfd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 125 Region 0: Memory at df135000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP SATA Controller [AHCI mode] [1043:1cfd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 122 Region 0: Memory at df130000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at df134000 (32-bit, non-prefetchable) [size=256] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at df133000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #4 [8086:9d13] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: df000000-df0fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:9d46] (rev 21) Subsystem: ASUSTeK Computer Inc. Device [1043:1cfd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21) Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP PMC [1043:1cfd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at df12c000 (32-bit, non-prefetchable) [size=16K] 00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21) Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP HD Audio [1043:1cfd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 127 Region 0: Memory at df128000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at df100000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel, snd_soc_skl 00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21) Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP SMBus [1043:1cfd] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at df132000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 01:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095a] (rev 59) Subsystem: Intel Corporation Dual Band Wireless-AC 7265 [8086:5110] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 126 Region 0: Memory at df000000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi ** USB devices: Bus 002 Device 002: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0a2a Intel Corp. Bus 001 Device 002: ID 0bda:57cb Realtek Semiconductor Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 10.4 APT prefers stable APT policy: (990, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.0-9-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.19.0-9-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1 ii kmod 26-1 ii linux-base 4.6 Versions of packages linux-image-4.19.0-9-amd64 recommends: pn apparmor <none> ii firmware-linux-free 3.4 Versions of packages linux-image-4.19.0-9-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.02+dfsg1-20 pn linux-doc-4.19 <none> Versions of packages linux-image-4.19.0-9-amd64 is related to: ii firmware-amd-graphics 20190114-2 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 20190114-2 pn firmware-libertas <none> ii firmware-linux-nonfree 20190114-2 ii firmware-misc-nonfree 20190114-2 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
