--- Begin Message ---
Package: linux-image-2.6.26-2-686
Version: 2.6.26-17lenny2
Severity: normal
Upgraded from Etch to Lenny, pretty much only official repositories apart from
multimedia, no other funny business. Software RAID5.
Installed 2.6.26-1-686 at first, then noticed -2-686 was out. Booted -2 about
10 times,
then all of a sudden it wouldn't boot anymore (no hardware or system related
software
change). Point of failure see below.
Reset a few times, then attempted to boot -1-686 which worked. Stuck to that
for the
moment.
Today -1-686 doesn't boot anymore. Tried -2-686 for laughs - boots.
Assumption: unhandled hardware condition at boot time.
Screenshot can be seen here:
http://www.vaultofsages.de/~dexterf/pub/boot.jpg
(Last line is about initrd)
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny2) ([email protected]) (gcc
version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Aug 14
01:27:18 UTC 2009
** Command line:
root=/dev/hda6 ro edd=off
** Not tainted
** Kernel log:
[ 36.539885] agpgart: Detected AGP bridge 0
[ 36.539942] agpgart: Setting up Nforce3 AGP.
[ 36.539977] agpgart: aperture base > 4G
[ 36.612256] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 36.612312] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
[ 36.679754] input: Power Button (FF) as /class/input/input2
[ 36.704117] ACPI: Power Button (FF) [PWRF]
[ 36.704240] input: Power Button (CM) as /class/input/input3
[ 36.732061] ACPI: Power Button (CM) [PWRB]
[ 37.483945] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 37.492680] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 37.711563] input: PC Speaker as /class/input/input4
[ 38.095167] parport_pc 00:06: reported by Plug and Play ACPI
[ 38.095229] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 38.294217] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKA] -> GSI 19
(level, low) -> IRQ 19
[ 65.987068] tmpfs: No value for mount option 'default'
[ 66.504962] Adding 996020k swap on /dev/hda2. Priority:-1 extents:1
across:996020k
[ 66.808988] EXT3 FS on hda6, internal journal
[ 67.086716] loop: module loaded
[ 67.316018] md: md0 stopped.
[ 67.419152] md: bind<sdc1>
[ 67.419356] md: bind<sda1>
[ 67.419564] md: bind<sdd1>
[ 67.419772] md: bind<sdb1>
[ 67.419976] md: bind<sde1>
[ 67.502607] xor: automatically using best checksumming function: pIII_sse
[ 67.520003] pIII_sse : 6994.000 MB/sec
[ 67.520037] xor: using function: pIII_sse (6994.000 MB/sec)
[ 67.523611] async_tx: api initialized (async)
[ 67.604017] raid6: int32x1 882 MB/s
[ 67.672019] raid6: int32x2 970 MB/s
[ 67.740034] raid6: int32x4 799 MB/s
[ 67.808024] raid6: int32x8 452 MB/s
[ 67.876014] raid6: mmxx1 1852 MB/s
[ 67.944015] raid6: mmxx2 3232 MB/s
[ 68.012010] raid6: sse1x1 1608 MB/s
[ 68.080023] raid6: sse1x2 2655 MB/s
[ 68.148007] raid6: sse2x1 2720 MB/s
[ 68.216016] raid6: sse2x2 3755 MB/s
[ 68.216049] raid6: using algorithm sse2x2 (3755 MB/s)
[ 68.216084] md: raid6 personality registered for level 6
[ 68.216118] md: raid5 personality registered for level 5
[ 68.216152] md: raid4 personality registered for level 4
[ 68.217406] raid5: device sde1 operational as raid disk 0
[ 68.217446] raid5: device sdb1 operational as raid disk 4
[ 68.217481] raid5: device sdd1 operational as raid disk 3
[ 68.217515] raid5: device sda1 operational as raid disk 2
[ 68.217550] raid5: device sdc1 operational as raid disk 1
[ 68.218012] raid5: allocated 5252kB for md0
[ 68.218046] raid5: raid level 5 set md0 active with 5 out of 5 devices,
algorithm 2
[ 68.218089] RAID5 conf printout:
[ 68.218121] --- rd:5 wd:5
[ 68.218154] disk 0, o:1, dev:sde1
[ 68.218186] disk 1, o:1, dev:sdc1
[ 68.218219] disk 2, o:1, dev:sda1
[ 68.218252] disk 3, o:1, dev:sdd1
[ 68.218285] disk 4, o:1, dev:sdb1
[ 69.124407] fuse init (API version 7.9)
[ 69.167279] tmpfs: No value for mount option 'default'
[ 69.239618] kjournald starting. Commit interval 5 seconds
[ 69.239618] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 69.239618] EXT3 FS on hda1, internal journal
[ 69.239618] EXT3-fs: mounted filesystem with ordered data mode.
[ 69.254051] kjournald starting. Commit interval 5 seconds
[ 69.254051] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 69.254051] EXT3 FS on hda5, internal journal
[ 69.254051] EXT3-fs: mounted filesystem with ordered data mode.
[ 69.273742] kjournald starting. Commit interval 5 seconds
[ 69.273742] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 69.273742] EXT3 FS on hda7, internal journal
[ 69.273742] EXT3-fs: mounted filesystem with ordered data mode.
[ 69.304204] SGI XFS with ACLs, security attributes, realtime, large block
numbers, no debug enabled
[ 69.305726] SGI XFS Quota Management subsystem
[ 69.306826] Filesystem "dm-3": Disabling barriers, not supported by the
underlying device
[ 69.307064] XFS mounting filesystem dm-3
[ 69.492588] Ending clean XFS mount for filesystem: dm-3
[ 69.492588] Filesystem "dm-0": Disabling barriers, not supported by the
underlying device
[ 69.492588] XFS mounting filesystem dm-0
[ 69.804030] Ending clean XFS mount for filesystem: dm-0
[ 69.804030] Filesystem "dm-1": Disabling barriers, not supported by the
underlying device
[ 69.804030] XFS mounting filesystem dm-1
[ 70.207176] Ending clean XFS mount for filesystem: dm-1
[ 71.367466] RPC: Registered udp transport module.
[ 71.367513] RPC: Registered tcp transport module.
[ 71.576725] Installing knfsd (copyright (C) 1996 [email protected]).
[ 71.601004] r8169: eth1: link up
[ 73.407449] NET: Registered protocol family 10
[ 73.407999] lo: Disabled Privacy Extensions
[ 83.549792] lp0: using parport0 (interrupt-driven).
[ 83.572337] ppdev: user-space parallel port driver
[ 83.644006] eth1: no IPv6 routers present
[ 92.231636] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 93.428535] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 93.444206] NFSD: starting 90-second grace period
[ 96.235342] [drm] Initialized drm 1.1.0 20060810
[ 96.244104] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 16
[ 96.244116] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 16
(level, low) -> IRQ 16
[ 96.244182] [drm] Initialized mga 3.2.1 20051102 on minor 0
[ 96.246014] [drm:mga_do_agp_dma_bootstrap] *ERROR* Unable to acquire AGP: -19
[ 96.256030] [drm] Initialized card for PCI DMA.
** Loaded modules:
Module Size Used by
mga 54784 2
drm 65192 3 mga
ppdev 6500 0
lp 8164 0
ipv6 235364 26
nfsd 186672 17
auth_rpcgss 33952 1 nfsd
exportfs 3904 1 nfsd
nfs 214024 0
lockd 54568 2 nfsd,nfs
nfs_acl 2912 2 nfsd,nfs
sunrpc 162528 13 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
xfs 457976 3
fuse 42908 1
raid456 117264 1
async_xor 3520 1 raid456
async_memcpy 2304 1 raid456
async_tx 6316 3 raid456,async_xor,async_memcpy
xor 14696 2 raid456,async_xor
md_mod 67068 2 raid456
sbp2 18572 0
loop 12748 0
snd_mpu401 6152 0
snd_cmipci 29024 2
snd_cs4232 11380 0
gameport 10700 1 snd_cmipci
snd_cs4231_lib 20512 1 snd_cs4232
snd_opl3_lib 9344 2 snd_cmipci,snd_cs4232
snd_pcm_oss 32832 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_hwdep 6212 1 snd_opl3_lib
snd_pcm 62596 3 snd_cmipci,snd_cs4231_lib,snd_pcm_oss
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
snd_seq_dummy 2660 0
snd_page_alloc 7816 2 snd_cs4231_lib,snd_pcm
snd_mpu401_uart 6368 3 snd_mpu401,snd_cmipci,snd_cs4232
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18528 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17800 4 snd_cs4231_lib,snd_opl3_lib,snd_pcm,snd_seq
snd_seq_device 6380 6
snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 19
snd_mpu401,snd_cmipci,snd_cs4232,snd_cs4231_lib,snd_opl3_lib,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
pcspkr 2432 0
k8temp 4064 0
shpchp 25528 0
pci_hotplug 23460 1 shpchp
button 6096 0
i2c_nforce2 5536 0
i2c_core 19828 1 i2c_nforce2
amd64_agp 8772 0
agpgart 28776 2 drm,amd64_agp
evdev 8000 3
ext3 105512 4
jbd 39444 1 ext3
mbcache 7108 1 ext3
dm_mirror 15104 0
dm_log 8484 1 dm_mirror
dm_snapshot 14340 0
dm_mod 46184 11 dm_mirror,dm_log,dm_snapshot
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ide_disk 10496 6
sd_mod 22200 10
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
ide_pci_generic 3908 0 [permanent]
amd74xx 7720 0 [permanent]
ide_core 96136 4 ide_cd_mod,ide_disk,ide_pci_generic,amd74xx
floppy 47748 0
sata_sil 7176 8
ohci1394 24944 0
ieee1394 75800 2 sbp2,ohci1394
r8169 23684 0
sata_nv 19240 2
ata_generic 4676 0
libata 140416 3 sata_sil,sata_nv,ata_generic
scsi_mod 129324 3 sbp2,sd_mod,libata
dock 8304 1 libata
forcedeth 45072 0
ehci_hcd 28396 0
ohci_hcd 18500 0
usbcore 118224 4 usbhid,ehci_hcd,ohci_hcd
thermal 15228 0
processor 32544 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: nVidia Corporation nForce3 250Gb Host Bridge
[10de:00e1] (rev a1)
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel modules: amd64-agp
00:01.0 ISA bridge [0601]: nVidia Corporation nForce3 250Gb LPC Bridge
[10de:00e0] (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation nForce 250Gb PCI System Management
[10de:00e4] (rev a1)
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 5080 [size=32]
Region 4: I/O ports at 5000 [size=64]
Region 5: I/O ports at 5040 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:02.0 USB Controller [0c03]: nVidia Corporation CK8S USB Controller
[10de:00e7] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller [0c03]: nVidia Corporation CK8S USB Controller
[10de:00e7] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.2 USB Controller [0c03]: nVidia Corporation nForce3 EHCI USB 2.0
Controller [10de:00e8] (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 20
Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:05.0 Bridge [0680]: nVidia Corporation CK8S Ethernet Controller [10de:00df]
(rev a2)
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:80a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ec00 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:08.0 IDE interface [0101]: nVidia Corporation CK8S Parallel ATA Controller
(v2.5) [10de:00e5] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx
00:0a.0 IDE interface [0101]: nVidia Corporation nForce3 Serial ATA Controller
[10de:00e3] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: I/O ports at d000 [size=128]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:0b.0 PCI bridge [0604]: nVidia Corporation nForce3 250Gb AGP Host to PCI
Bridge [10de:00e2] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
Memory behind bridge: fd800000-fe8fffff
Prefetchable memory behind bridge: f1700000-f56fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:0e.0 PCI bridge [0604]: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge
[10de:00ed] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
I/O behind bridge: 0000b000-0000cfff
Memory behind bridge: fe900000-feafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
01:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G400/G450
[102b:0525] (rev 04) (prog-if 00 [VGA controller])
Subsystem: Matrox Graphics, Inc. Millennium G400 MAX/Dual Head 32Mb
[102b:2179]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f2000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at fe8fc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at fe8e0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel modules: matrox_w1, matroxfb_base
02:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet [10ec:8169] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
[10ec:8169]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
02:0a.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738
[13f6:0111] (rev 10)
Subsystem: TERRATEC Electronic GmbH Aureon 5.1 [153b:1144]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at c400 [size=256]
Capabilities: <access denied>
Kernel driver in use: C-Media PCI
Kernel modules: snd-cmipci
02:0b.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE
1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard
[1043:808a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at cc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
02:0c.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3114
[SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8136]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at bc00 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b400 [size=4]
Region 4: I/O ports at b000 [size=16]
Region 5: Memory at feafec00 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at fe980000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil
-- System Information:
Debian Release: 5.0.2
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
--- End Message ---
