Your message dated Sun, 9 Nov 2025 02:17:23 +0100 with message-id <[email protected]> and subject line Re: Bug#1118612: libmtp-common - Fails to find mtp-probe has caused the Debian Bug report #1118612, regarding libmtp-common - Fails to find mtp-probe to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 1118612: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1118612 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: libmtp-common Version: 1.1.22-1 Severity: important X-Debbugs-Cc: [email protected] /usr/lib/udev/rules.d/69-libmtp.rules tries to run /usr/lib/udev/mtp-probe, but the package does not depend on libmtp-runtime. However mtp-probe seems to not work, it rejects a Sony Alpha7 in MTP mode: | checking bus 3, device 73: "/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-1" | bus: 3, device: 73 was not an MTP device The device in question is, and before some recent updates it worked fine: | Bus 003 Device 073: ID 054c:0da6 Sony Corp. ILCE-7M4 | Negotiated speed: High Speed (480Mbps) | Device Descriptor: | bLength 18 | bDescriptorType 1 | bcdUSB 2.10 | bDeviceClass 0 [unknown] | bDeviceSubClass 0 [unknown] | bDeviceProtocol 0 | bMaxPacketSize0 64 | idVendor 0x054c Sony Corp. | idProduct 0x0da6 ILCE-7M4 | bcdDevice 2.00 | iManufacturer 1 Sony | iProduct 2 ILCE-7M4 | iSerial 3 XXXXXXXXXXXX | bNumConfigurations 1 | Configuration Descriptor: | bLength 9 | bDescriptorType 2 | wTotalLength 0x0027 | bNumInterfaces 1 | bConfigurationValue 1 | iConfiguration 0 | bmAttributes 0xc0 | Self Powered | MaxPower 0mA | Interface Descriptor: | bLength 9 | bDescriptorType 4 | bInterfaceNumber 0 | bAlternateSetting 0 | bNumEndpoints 3 | bInterfaceClass 6 Imaging | bInterfaceSubClass 1 Still Image Capture | bInterfaceProtocol 1 Picture Transfer Protocol (PIMA 15470) | iInterface 0 | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x81 EP 1 IN | bmAttributes 2 | Transfer Type Bulk | Synch Type None | Usage Type Data | wMaxPacketSize 0x0200 1x 512 bytes | bInterval 0 | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x02 EP 2 OUT | bmAttributes 2 | Transfer Type Bulk | Synch Type None | Usage Type Data | wMaxPacketSize 0x0200 1x 512 bytes | bInterval 0 | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x83 EP 3 IN | bmAttributes 3 | Transfer Type Interrupt | Synch Type None | Usage Type Data | wMaxPacketSize 0x0020 1x 32 bytes | bInterval 7 | Binary Object Store Descriptor: | bLength 5 | bDescriptorType 15 | wTotalLength 0x002a | bNumDeviceCaps 3 | USB 2.0 Extension Device Capability: | bLength 7 | bDescriptorType 16 | bDevCapabilityType 2 | bmAttributes 0x00000006 | BESL Link Power Management (LPM) Supported | SuperSpeed USB Device Capability: | bLength 10 | bDescriptorType 16 | bDevCapabilityType 3 | bmAttributes 0x00 | wSpeedsSupported 0x000e | Device can operate at Full Speed (12Mbps) | Device can operate at High Speed (480Mbps) | Device can operate at SuperSpeed (5Gbps) | bFunctionalitySupport 1 | Lowest fully-functional device speed is Full Speed (12Mbps) | bU1DevExitLat 10 micro seconds | bU2DevExitLat 2047 micro seconds | SuperSpeedPlus USB Device Capability: | bLength 20 | bDescriptorType 16 | bDevCapabilityType 10 | bmAttributes 0x00000001 | Sublink Speed Attribute count 2 | Sublink Speed ID count 1 | wFunctionalitySupport 0x1100 | Min functional Speed Attribute ID: 0 | Min functional RX lanes: 1 | Min functional TX lanes: 1 | bmSublinkSpeedAttr[0] 0x000a4030 | Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus | bmSublinkSpeedAttr[1] 0x000a40b0 | Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus | Device Status: 0x0001 | Self Powered -- System Information: Debian Release: forky/sid APT prefers testing APT policy: (700, 'testing'), (500, 'unstable-debug'), (500, 'stable-updates'), (500, 'oldstable-updates'), (500, 'unstable'), (500, 'stable'), (500, 'oldstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 6.16.5+deb14-amd64 (SMP w/16 CPU threads; PREEMPT) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled -- no debconf information
--- End Message ---
--- Begin Message ---On Wed, Oct 22, 2025 at 10:35:31PM +0200, Bastian Blank wrote: > However mtp-probe seems to not work, it rejects a Sony Alpha7 in MTP > mode: > | checking bus 3, device 73: > "/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-1" > | bus: 3, device: 73 was not an MTP device > The device in question is, and before some recent updates it worked fine: I have no idea what happened. It seems to be related to the kernel version. So right now it works again. Bastian -- A princess should not be afraid -- not with a brave knight to protect her. -- McCoy, "Shore Leave", stardate 3025.3
--- End Message ---
