--- Begin Message ---
Package: gddccontrol
Version: 0.4.4-1
Severity: normal
Hello,
I have two monitors attached right now, a dumb one without DDC/CI
support and some old Samsung (which surprisingly supports DDC/CI).
See below for ddccontrol scan results.
The problem is: in the pulldown menu of gddccontrol, I see them both but
they are labeled incorrectly.
I.e. the menu says:
dev:/dev/i2c-5: VESA standard monitor
dev:/dev/i2c-6: Samsung SyncMaster 710TM
When I select i2c-5 (supposedly the monitor w/o DDC/CI suppport) the
settings pane gets enabled and shows me the control options of the
Samsung monitor. And vice versa, selecting
"dev:/dev/i2c-6: Samsung SyncMaster 710TM"
disables the settings pane and shows the "Maybe this monitor was
disconnected"... dummy label.
IMHO the label formating of the "Current monitor" pulldown menu is
broken, the rest works.
Best Regards,
Eduard.
ddccontrol version 0.4.4
Copyright 2004-2005 Oleg I. Vdovikin ([email protected])
Copyright 2004-2006 Nicolas Boichat ([email protected])
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU General
Public License.
Probing for available monitorsradeon_open: mmap failed: Invalid argument
....I/O warning : failed to load external entity
"/usr/share/ddccontrol-db/monitor/ENC1766.xml"
Document not parsed successfully.
.......
Detected monitors :
- Device: dev:/dev/i2c-6
DDC/CI supported: No
Monitor Name: VESA standard monitor
Input type: Digital
- Device: dev:/dev/i2c-5
DDC/CI supported: Yes
Monitor Name: Samsung SyncMaster 710TM
Input type: Digital
(Automatically selected)
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-5...
EDID readings:
Plug and Play ID: SAM0168 [Samsung SyncMaster 710TM]
Input type: Digital
= Samsung SyncMaster 710TM
> Color settings
> Brightness and Contrast
> id=magicbright, name=Magic Bright Mode, address=0xdc,
delay=-1ms, type=2
Possible values:
> id=text - name=Text, value=1
> id=internet - name=Internet, value=2
> id=entertain - name=Entertain, value=3
> id=custom - name=Custom, value=4
supported, value=4, maximum=4
> id=brightness, name=Brightness, address=0x10, delay=-1ms,
type=0
supported, value=16, maximum=100
> id=contrast, name=Contrast, address=0x12, delay=-1ms, type=0
supported, value=56, maximum=100
> Color maximum level
> id=red, name=Red maximum level, address=0x16, delay=-1ms,
type=0
supported, value=33, maximum=64
> id=green, name=Green maximum level, address=0x18, delay=-1ms,
type=0
supported, value=32, maximum=64
> id=blue, name=Blue maximum level, address=0x1a, delay=-1ms,
type=0
supported, value=32, maximum=64
> Various color settings
> id=colorpreset, name=Color Preset, address=0xe0, delay=-1ms,
type=2
Possible values:
> id=normal - name=Normal, value=3
> id=custom - name=Custom, value=0
> id=warm - name=Warm, value=1
> id=cool - name=Cool, value=2
supported, value=0, maximum=3
> Others
> Restore defaults
> id=defaults, name=Restore Factory Defaults, address=0x4,
delay=2000ms, type=1
Possible values:
> id=default - name=Restore Factory Defaults, value=1
supported, value=0, maximum=1
> id=defaultluma, name=Restore Brightness and Contrast,
address=0x5, delay=2000ms, type=1
Possible values:
> id=default - name=Restore Brightness and Contrast,
value=1
supported, value=0, maximum=1
> id=defaultcolor, name=Restore Factory Default Color,
address=0x8, delay=2000ms, type=1
Possible values:
> id=default - name=Restore Factory Default Color,
value=1
supported, value=0, maximum=1
> id=settings, name=Settings, address=0xb0, delay=1000ms, type=1
Possible values:
> id=default - name=Settings, value=1
supported, value=0, maximum=2
> OSD
> id=osd, name=On Screen Display, address=0xca, delay=-1ms,
type=2
Possible values:
> id=disable - name=Disable, value=1
> id=enable - name=Enable, value=2
supported, value=2, maximum=2
> id=osd2, name=On Screen Display (Samsung), address=0xf5,
delay=-1ms, type=2
Possible values:
> id=disable - name=Disable, value=1
> id=enable - name=Enable, value=0
supported, value=0, maximum=2
> id=language, name=Language select, address=0xcc, delay=-1ms,
type=2
Possible values:
> id=english - name=English, value=2
> id=french - name=Français (French), value=3
> id=german - name=Deutsch (German), value=4
> id=italian - name=Italiano (Italian), value=5
> id=spanish - name=Castellano (Spanish), value=10
> id=russian - name=Русский (Russian), value=9
> id=swedish - name=Svenska (Swedish), value=11
supported, value=4, maximum=11
> Input settings
> id=autosource, name=Autoselect Input Source, address=0xe2,
delay=-1ms, type=2
Possible values:
> id=auto - name=Automatic, value=0
> id=manual - name=Manual, value=1
supported, value=0, maximum=1
> id=inputsource, name=Input Source Select, address=0x60,
delay=-1ms, type=2
Possible values:
> id=analog - name=Analog, value=1
> id=digital - name=Digital, value=3
supported, value=3, maximum=3
> Power control
> id=dpms, name=DPMS Control, address=0xd6, delay=-1ms, type=2
Possible values:
> id=on - name=On, value=1
> id=standby - name=Standby, value=4
supported, value=1, maximum=4
> id=power, name=Power control, address=0xe1, delay=-1ms, type=2
Possible values:
> id=off - name=Off, value=0
> id=on - name=On, value=1
supported, value=1, maximum=1
-- System Information:
Debian Release: buster/sid
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1,
'experimental-debug'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.19.1 (SMP w/4 CPU cores; PREEMPT)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8),
LANGUAGE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)
Versions of packages gddccontrol depends on:
ii ddccontrol 0.4.4-1
ii libc6 2.27-6
ii libddccontrol0 0.4.4-1
ii libglib2.0-0 2.58.1-2
ii libgtk2.0-0 2.24.32-3
ii libpango-1.0-0 1.42.4-3
ii policykit-1 0.105-21
gddccontrol recommends no packages.
gddccontrol suggests no packages.
-- no debconf information
--
<yath> EIN FILTER AUF ALLES ICMP?
<yath> SEID IHR DES WAHNSINNS?
<eskaly> kann man auch auf kleinbuchstaben filtern?
--- End Message ---
pgp6pdLmI4D1B.pgp
