Package: cupsys Version: 1.1.22-8 & 1.1.23-2 when Printing with printers using ipp over https://, I get 100% of CPU utilization after the job is sent.
On Admin-Panel (http://localhost:631/printers/hp-laserjet) the printers first stauts after issuing a printjob is "Printer does not support IPP/1.1, trying IPP/1.0..." after some seconds or minutes o sending the data it says ": Print file accepted - job ID 41." and CPU utilization goes up and is caused py a process called "https" (when using "top"-command) This process is stopped when I cancel the Printjob which at this time is back in "pending since..."-mode although it has already been sent to the hardware and is going to be printed. My backend-configuration is as follows: debian:/usr/lib/cups/backend# ls -l total 108 -rwxr-xr-x 1 root root 10412 Oct 5 21:33 canon -rwxr-xr-x 1 root root 10532 Oct 5 21:33 epson lrwxrwxrwx 1 root root 3 Jan 13 17:19 http -> ipp lrwxrwxrwx 1 root root 3 Nov 12 00:12 https -> ipp -rwxr-xr-x 1 root root 19708 Jan 12 11:02 ipp -rwxr-xr-x 1 root root 15964 Jan 12 11:02 lpd -rwxr-xr-x 1 root root 8136 Jan 12 11:02 parallel -rw-r--r-- 1 root root 5896 Jan 12 11:02 scsi -rw-r--r-- 1 root root 8608 Jan 12 11:02 serial lrwxrwxrwx 1 root root 17 Jan 13 17:20 smb -> /usr/bin/smbspool -rwxr-xr-x 1 root root 7740 Jan 12 11:02 socket -rwxr-xr-x 1 root root 10320 Jan 12 11:02 usb This is the printers config: (printers.conf) ... <DefaultPrinter hp-laserjet> Info HP LaserJet 8000 Series PS Location SomeLocation DeviceURI https://user:[EMAIL PROTECTED]/printers/ein-ps/.printer State Stopped StateMessage Paused Accepting Yes JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0 </Printer> ... The printer is a remote printer connected to a central (MS-Windows? dont really know...) printingserver using IPP over https. I'm using the ppd files from package foomatic-filters-ppds and for the above printer: *FoomaticIDs: HP-LaserJet_8000 Postscript Kernel: Linux version 2.4.27 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-5)) Debian Sarge The problem appeared from cupsys version 1.1.22-8 on. Older versions worked with no problems. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
