package: xdebconfigurator Hi,
let me first say thank you for this wonderfull package!
Unfortunatly it doesn't work with one s3-graphiccard I use, it chooses the
s3-driver, but my card needs the vesa-driver and also BusID has to be set!
Attached are XF86Config as created by xdebconfigurator, the working config,
and the outputs of '(lspci ; lspci -n) | sort' and '/sbin/discover --xdriver
video'.
Discover advices the wrong driver, but since the BusID has also be set, I'll
attach this bugreport to xdebconfigurator first...
/usr/share/doc/xserver-xfree86/Status.gz reads: 4.3.0:
Support (accelerated) for the 964 (revisions 0 and 1), 968,
Trio32, Trio64, Trio64, Trio64V+, Trio64UV+, Aurora64V+,
Trio64V2, and PLATO/PX is provided by the "s3" driver (however,
only models using the IBM RGB 524, Texas Instruments 3025, or an
internal TrioDAC RAMDAC chip are supported). Support (acceler-
ated) for the ViRGE, ViRGE/VX, ViRGE/DX, ViRGE/GX, ViRGE/GX2,
ViRGE/MX, ViRGE/MX+, Trio3D and Trio3D/2X is provided by the
"s3virge" driver. Support (accelerated) for the Savage3D, Sav-
age3D/MV, Savage4, Savage2000, and SuperSavage, is provided by
the "savage" driver. Support for the other S3 chipsets has not
yet been ported.
Summary:
All hardware supported in 3.3.6 is also supported in 4.3.0 except
for the 911, 924, 801, 805, 928, 864, and 868, and versions of
the 964 and 968 that do not use the RAMDAC chips listed above.
The SuperSavage chipset is supported only in 4.3.0.
Installed software:
ii xdebconfigurator 1.14 A script used with debconf to
ii discover1 1.7.6 hardware identification system
ii xserver-xfree86 4.3.0.dfsg.1-10 the XFree86 X server
HTH, if not, I'll gladly provide more details.
regards,
Holger
s3
0000:00:00.0 0600: 10b9:1541 (rev 04) 0000:00:00.0 Host bridge: ALi Corporation M1541 (rev 04) 0000:00:01.0 0604: 10b9:5243 (rev 04) 0000:00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev 04) 0000:00:02.0 0c03: 10b9:5237 (rev 03) 0000:00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 0000:00:07.0 0601: 10b9:1533 (rev c3) 0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] (rev c3) 0000:00:08.0 0300: 5333:88f0 0000:00:08.0 VGA compatible controller: S3 Inc. 86c968 [Vision 968 VRAM] rev 0 0000:00:0a.0 0401: 13f6:0111 (rev 10) 0000:00:0a.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) 0000:00:0b.0 0200: 10ec:8139 (rev 10) 0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:0f.0 0101: 10b9:5229 (rev c2) 0000:00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c2)
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "S3 Inc. 86c968 [Vision 968 VRAM] rev 0"
Driver "vesa"
BusID "PCI:0:8:0"
EndSection
Section "Monitor"
Identifier "Xdebc Monitor"
HorizSync 28-50
VertRefresh 43-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "S3 Inc. 86c968 [Vision 968 VRAM] rev 0"
Monitor "Xdebc Monitor"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "S3 Inc. 86c968 [Vision 968 VRAM] rev 0"
Driver "s3"
EndSection
Section "Monitor"
Identifier "Xdebc Monitor"
HorizSync 28-50
VertRefresh 43-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "S3 Inc. 86c968 [Vision 968 VRAM] rev 0"
Monitor "Xdebc Monitor"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
pgpL7MMjekgvS.pgp
Description: PGP signature
