Content-Length: 47026 Lines: 1032 This is a MIME-formatted message. If you see this text it means that your E-mail software does not support MIME-formatted messages.
You are right this is strange. So probably what happens is that I got confused with all the different tests I have made and I picked up the wrong .config. The one that works was probably the one where I disabled all ACPI support.
So I have done again the compilations, to be sure, and here is what get:
* kernel-source 2.4.27-6 + 132 patch + config from your kernel-headers 2.4.27-8 :
it does not work: pushing power button switches off LCD but freezes computer; same effect for battery key fn-F2.
I am attaching the content of dmesg as file dmesg.20050118
* your kernel-image from http://debian.vergenet.net/testing/ kernel-image-2.4.27-2-686_2.4.27-8_i386.deb :
it does the same thing. I am attaching the content of dmesg as file dmesg.2.4.27-8
* kernel-source 2.4.27-6 + 132 patch + config from your kernel-headers 2.4.27-8 MODIFIED for
disabling local APIC:
it works ! I am attaching the content of dmesg as file dmesg.20050118.2
*for reference, the kernel-image from backports kernel-image-2.4.27-1-686_2.4.27-1.backports.org.1_i386.deb :
works well; I am attaching the content of dmesg as file dmesg.backport
On the latter the DELL is recognized and local APIC is disabled. Maybe this behaviour should be preserved ?
Best regards San
Linux version 2.4.27-20050118 ([EMAIL PROTECTED]) (version gcc 3.3.5 (Debian 1:3.3.5-5)) #1 mer jan 19 08:09:10 CET 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffae000 (usable) BIOS-e820: 000000001ffae000 - 0000000020000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 130990 zone(0): 4096 pages. zone(1): 126894 pages. zone(2): 0 pages. ACPI: RSDP (v000 DELL ) @ 0x000fdf00 ACPI: RSDT (v001 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0000 ACPI: FADT (v001 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0400 ACPI: ASF! (v016 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0800 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 Kernel command line: root=/dev/hda3 ro Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1298.927 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2595.22 BogoMIPS Memory: 511112k/523960k available (1196k kernel code, 12460k reserved, 451k data, 116k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000 CPU: Common caps: a7e9fbbf 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1300MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1298.9343 MHz. ..... host bus clock speed is 99.9179 MHz. cpu: 0, clocks: 999179, slice: 499589 CPU0<T0:999168,T1:499568,D:11,S:499589,C:999179> mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Discovered primary peer bus 08 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/24cc] at 00:1f.0 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:00.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A PCI: Found IRQ 11 for device 00:1f.6 PCI: Sharing IRQ 11 with 00:1f.5 PCI: Sharing IRQ 11 with 02:03.0 COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4236 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done. Freeing initrd memory: 4236k freed VFS: Mounted root (cramfs filesystem). Freeing unused kernel memory: 116k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide: late registration of driver. ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:00.0 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio hda: ST94811A, ATA DISK drive blk: queue e0829c60, I/O limit 4095Mb (mask 0xffffffff) hdc: HL-DT-STCD-RW/DVD-ROM GCC-4241N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: 78140160 sectors (40008 MB) w/8192KiB Cache, CHS=4864/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 > Journalled Block Device driver loaded VFS: Can't find ext3 filesystem on dev ide0(3,3). VFS: Can't find ext2 filesystem on dev ide0(3,3). FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 03:03. Unable to identify CD-ROM format. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,3)) ... for (ide0(3,3)) ide0(3,3):Using r5 hash to sort names VFS: Can't find ext3 filesystem on dev ide0(3,3). VFS: Can't find ext2 filesystem on dev ide0(3,3). FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 03:03. Unable to identify CD-ROM format. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,3)) ... for (ide0(3,3)) ide0(3,3):Using r5 hash to sort names Adding Swap: 497972k swap-space (priority -1) Real Time Clock Driver v1.10f usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 08:29:14 Jan 19 2005 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1d.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xbf80, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.1 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.1 PCI: Sharing IRQ 11 with 02:01.2 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xbf40, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 PCI: Sharing IRQ 11 with 02:00.0 PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xbf20, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver usbkbd usbkbd.c: :USB HID Boot Protocol keyboard driver tg3.c:v3.8 (July 14, 2004) PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 eth0: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet XX.XX.XXX.XX.XX.XX.X eth0: HostTXDS[1] RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[0] Intel 810 + AC97 Audio, version 1.01, 08:27:44 Jan 19 2005 PCI: Found IRQ 11 for device 00:1f.5 PCI: Sharing IRQ 11 with 00:1f.6 PCI: Sharing IRQ 11 with 02:03.0 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xbc40 and 0xb800, MEM 0xf4fff800 and 0xf4fff400, IRQ 11 i810: Intel ICH4 mmio at 0xe0a2c800 and 0xe0a2e400 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: 0x8384:0x7650 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,6)) ... for (ide0(3,6)) ide0(3,6):Using r5 hash to sort names ohci1394: $Rev: 1045 $ Ben Collins <[EMAIL PROTECTED]> PCI: Found IRQ 11 for device 02:01.2 PCI: Sharing IRQ 11 with 00:1d.1 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.1 ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[fafef800-fafeffff] Max Packet=[2048] Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:01.0 PCI: Sharing IRQ 11 with 00:1d.1 PCI: Sharing IRQ 11 with 02:01.1 PCI: Sharing IRQ 11 with 02:01.2 PCI: Found IRQ 11 for device 02:01.1 PCI: Sharing IRQ 11 with 00:1d.1 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.2 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000006 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000047 ieee1394: Host added: ID:BUS[0-00:1023] GUID[424fc0002a59ec10] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001 i810_rng hardware driver 0.9.8 loaded hw_random: cannot enable RNG, aborting PCI: Found IRQ 11 for device 00:1d.7 PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 00:1d.7: irq 11, pci mem e0b09c00 usb.c: new USB bus registered, assigned bus number 4 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 32 is not supported by device 00:1d.7 ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected uhci.c: USB Universal Host Controller Interface driver v1.1 device eth0 entered promiscuous mode device eth0 left promiscuous mode apm: BIOS not found. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0800-0x08ff: excluding 0x8c0-0x8df cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0a00-0x0aff: clean. apm: BIOS not found. apm: BIOS not found.
Linux version 2.4.27-2-686 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-6)) #1 Fri Jan 14 22:07:24 JST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffae000 (usable) BIOS-e820: 000000001ffae000 - 0000000020000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 130990 zone(0): 4096 pages. zone(1): 126894 pages. zone(2): 0 pages. ACPI: RSDP (v000 DELL ) @ 0x000fdf00 ACPI: RSDT (v001 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0000 ACPI: FADT (v001 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0400 ACPI: ASF! (v016 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0800 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 Kernel command line: root=/dev/hda3 ro Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1298.922 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2595.22 BogoMIPS Memory: 511144k/523960k available (1197k kernel code, 12428k reserved, 451k data, 116k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000 CPU: Common caps: a7e9fbbf 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1300MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1298.8957 MHz. ..... host bus clock speed is 99.9150 MHz. cpu: 0, clocks: 999150, slice: 499575 CPU0<T0:999136,T1:499552,D:9,S:499575,C:999150> mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Discovered primary peer bus 08 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/24cc] at 00:1f.0 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:00.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A PCI: Found IRQ 11 for device 00:1f.6 PCI: Sharing IRQ 11 with 00:1f.5 PCI: Sharing IRQ 11 with 02:03.0 COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4196 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done. Freeing initrd memory: 4196k freed VFS: Mounted root (cramfs filesystem). Freeing unused kernel memory: 116k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide: late registration of driver. ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:00.0 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio hda: ST94811A, ATA DISK drive blk: queue e0829cc0, I/O limit 4095Mb (mask 0xffffffff) hdc: HL-DT-STCD-RW/DVD-ROM GCC-4241N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: 78140160 sectors (40008 MB) w/8192KiB Cache, CHS=4864/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 > Journalled Block Device driver loaded VFS: Can't find ext3 filesystem on dev ide0(3,3). VFS: Can't find ext2 filesystem on dev ide0(3,3). FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 03:03. Unable to identify CD-ROM format. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,3)) ... for (ide0(3,3)) ide0(3,3):Using r5 hash to sort names VFS: Can't find ext3 filesystem on dev ide0(3,3). VFS: Can't find ext2 filesystem on dev ide0(3,3). FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 03:03. Unable to identify CD-ROM format. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,3)) ... for (ide0(3,3)) ide0(3,3):Using r5 hash to sort names Adding Swap: 497972k swap-space (priority -1) Real Time Clock Driver v1.10f usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 22:34:13 Jan 14 2005 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1d.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xbf80, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.1 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.1 PCI: Sharing IRQ 11 with 02:01.2 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xbf40, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 PCI: Sharing IRQ 11 with 02:00.0 PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xbf20, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver hub.c: new USB device 00:1d.0-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x46d/0xc03d) is not claimed by any active driver. usb.c: registered new driver usbkbd usbkbd.c: :USB HID Boot Protocol keyboard driver tg3.c:v3.8 (July 14, 2004) PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 eth0: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet xx.XX.XX.XX.XX.XX eth0: HostTXDS[1] RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[0] Intel 810 + AC97 Audio, version 1.01, 22:30:58 Jan 14 2005 PCI: Found IRQ 11 for device 00:1f.5 PCI: Sharing IRQ 11 with 00:1f.6 PCI: Sharing IRQ 11 with 02:03.0 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xbc40 and 0xb800, MEM 0xf4fff800 and 0xf4fff400, IRQ 11 i810: Intel ICH4 mmio at 0xe0a2c800 and 0xe0a2e400 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: 0x8384:0x7650 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,6)) ... for (ide0(3,6)) ide0(3,6):Using r5 hash to sort names tg3: eth0: Link is up at 10 Mbps, half duplex. tg3: eth0: Flow control is off for TX and off for RX. usb.c: registered new driver hiddev usb.c: registered new driver hid input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb1:2.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> hid-core.c: USB HID support drivers ohci1394: $Rev: 1045 $ Ben Collins <[EMAIL PROTECTED]> PCI: Found IRQ 11 for device 02:01.2 PCI: Sharing IRQ 11 with 00:1d.1 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.1 ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[fafef800-fafeffff] Max Packet=[2048] mice: PS/2 mouse device common for all mice ieee1394: Host added: ID:BUS[0-00:1023] GUID[424fc0002a59ec10] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 device eth0 entered promiscuous mode device eth0 left promiscuous mode pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001 i810_rng hardware driver 0.9.8 loaded hw_random: cannot enable RNG, aborting PCI: Found IRQ 11 for device 00:1d.7 PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 00:1d.7: irq 11, pci mem e0af8c00 usb.c: new USB bus registered, assigned bus number 4 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 32 is not supported by device 00:1d.7 ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 usb.c: USB disconnect on device 00:1d.0-1 address 2 hub.c: USB hub found hub.c: 6 ports detected uhci.c: USB Universal Host Controller Interface driver v1.1 hub.c: new USB device 00:1d.0-1, assigned address 3 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb1:3.0 apm: BIOS not found. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). apm: BIOS not found. apm: BIOS not found.
Linux version 2.4.27-20050118 ([EMAIL PROTECTED]) (version gcc 3.3.5 (Debian 1:3.3.5-5)) #1 mer jan 19 13:59:26 CET 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffae000 (usable) BIOS-e820: 000000001ffae000 - 0000000020000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 130990 zone(0): 4096 pages. zone(1): 126894 pages. zone(2): 0 pages. ACPI: RSDP (v000 DELL ) @ 0x000fdf00 ACPI: RSDT (v001 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0000 ACPI: FADT (v001 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0400 ACPI: ASF! (v016 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0800 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 Kernel command line: root=/dev/hda3 ro Initializing CPU#0 Detected 599.513 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1674.44 BogoMIPS Memory: 511172k/523960k available (1186k kernel code, 12400k reserved, 439k data, 96k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: a7e9f9bf 00000000 00000000 00000000 CPU: Common caps: a7e9f9bf 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1300MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Discovered primary peer bus 08 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/24cc] at 00:1f.0 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:00.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A PCI: Found IRQ 11 for device 00:1f.6 PCI: Sharing IRQ 11 with 00:1f.5 PCI: Sharing IRQ 11 with 02:03.0 COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4236 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done. Freeing initrd memory: 4236k freed VFS: Mounted root (cramfs filesystem). Freeing unused kernel memory: 96k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide: late registration of driver. ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:00.0 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio hda: ST94811A, ATA DISK drive blk: queue e0829c60, I/O limit 4095Mb (mask 0xffffffff) hdc: HL-DT-STCD-RW/DVD-ROM GCC-4241N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: 78140160 sectors (40008 MB) w/8192KiB Cache, CHS=4864/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 > Journalled Block Device driver loaded VFS: Can't find ext3 filesystem on dev ide0(3,3). VFS: Can't find ext2 filesystem on dev ide0(3,3). FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 03:03. Unable to identify CD-ROM format. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,3)) ... for (ide0(3,3)) ide0(3,3):Using r5 hash to sort names VFS: Can't find ext3 filesystem on dev ide0(3,3). VFS: Can't find ext2 filesystem on dev ide0(3,3). FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 03:03. Unable to identify CD-ROM format. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,3)) ... for (ide0(3,3)) ide0(3,3):Using r5 hash to sort names Adding Swap: 497972k swap-space (priority -1) Real Time Clock Driver v1.10f usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 14:22:33 Jan 19 2005 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1d.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xbf80, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.1 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.1 PCI: Sharing IRQ 11 with 02:01.2 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xbf40, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 PCI: Sharing IRQ 11 with 02:00.0 PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xbf20, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver usbkbd usbkbd.c: :USB HID Boot Protocol keyboard driver tg3.c:v3.8 (July 14, 2004) PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 eth0: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet XX.XX.XXX.XX.XX.XX eth0: HostTXDS[1] RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[0] hub.c: new USB device 00:1d.0-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x46d/0xc03d) is not claimed by any active driver. Intel 810 + AC97 Audio, version 1.01, 14:20:05 Jan 19 2005 PCI: Found IRQ 11 for device 00:1f.5 PCI: Sharing IRQ 11 with 00:1f.6 PCI: Sharing IRQ 11 with 02:03.0 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xbc40 and 0xb800, MEM 0xf4fff800 and 0xf4fff400, IRQ 11 i810: Intel ICH4 mmio at 0xe0a2c800 and 0xe0a2e400 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: 0x8384:0x7650 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 i810_audio: setting clocking to 74466 reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,6)) ... for (ide0(3,6)) ide0(3,6):Using r5 hash to sort names tg3: eth0: Link is up at 10 Mbps, half duplex. tg3: eth0: Flow control is off for TX and off for RX. usb.c: registered new driver hiddev usb.c: registered new driver hid input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb1:2.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice ohci1394: $Rev: 1045 $ Ben Collins <[EMAIL PROTECTED]> PCI: Found IRQ 11 for device 02:01.2 PCI: Sharing IRQ 11 with 00:1d.1 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.1 ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[fafef800-fafeffff] Max Packet=[2048] Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:01.0 PCI: Sharing IRQ 11 with 00:1d.1 PCI: Sharing IRQ 11 with 02:01.1 PCI: Sharing IRQ 11 with 02:01.2 PCI: Found IRQ 11 for device 02:01.1 PCI: Sharing IRQ 11 with 00:1d.1 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.2 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000006 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000047 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 ieee1394: Host added: ID:BUS[0-00:1023] GUID[424fc0002a59ec10] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001 i810_rng hardware driver 0.9.8 loaded hw_random: cannot enable RNG, aborting PCI: Found IRQ 11 for device 00:1d.7 PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 00:1d.7: irq 11, pci mem e0b12c00 usb.c: new USB bus registered, assigned bus number 4 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 32 is not supported by device 00:1d.7 ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 usb.c: USB disconnect on device 00:1d.0-1 address 2 hub.c: USB hub found hub.c: 6 ports detected uhci.c: USB Universal Host Controller Interface driver v1.1 hub.c: new USB device 00:1d.0-1, assigned address 3 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb1:3.0 device eth0 entered promiscuous mode device eth0 left promiscuous mode apm: BIOS not found. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0800-0x08ff: excluding 0x8c0-0x8df cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0a00-0x0aff: clean. apm: BIOS not found. apm: BIOS not found.
Linux version 2.4.27-1-686 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Sun Sep 12 02:35:58 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffae000 (usable) BIOS-e820: 000000001ffae000 - 0000000020000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 130990 zone(0): 4096 pages. zone(1): 126894 pages. zone(2): 0 pages. Dell Latitude with broken BIOS detected. Refusing to enable the local APIC. ACPI: RSDP (v000 DELL ) @ 0x000fdf00 ACPI: RSDT (v001 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0000 ACPI: FADT (v001 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0400 ACPI: ASF! (v016 DELL CPi R 0x27d4010c ASL 0x00000061) @ 0x1fff0800 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 Kernel command line: root=/dev/hda3 ro Initializing CPU#0 Detected 1298.915 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2595.22 BogoMIPS Memory: 511424k/523960k available (1064k kernel code, 12148k reserved, 507k data, 104k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: a7e9f9bf 00000000 00000000 00000000 CPU: Common caps: a7e9f9bf 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1300MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Discovered primary peer bus 08 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/24cc] at 00:1f.0 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:00.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A PCI: Found IRQ 11 for device 00:1f.6 PCI: Sharing IRQ 11 with 00:1f.5 PCI: Sharing IRQ 11 with 02:03.0 COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4000 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done. Freeing initrd memory: 4000k freed VFS: Mounted root (cramfs filesystem). Freeing unused kernel memory: 104k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide: late registration of driver. ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:00.0 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio hda: ST94811A, ATA DISK drive blk: queue e0827c40, I/O limit 4095Mb (mask 0xffffffff) hdc: HL-DT-STCD-RW/DVD-ROM GCC-4241N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: 78140160 sectors (40008 MB) w/8192KiB Cache, CHS=4864/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 > Journalled Block Device driver loaded VFS: Can't find ext3 filesystem on dev ide0(3,3). VFS: Can't find ext2 filesystem on dev ide0(3,3). FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 03:03. Unable to identify CD-ROM format. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,3)) ... for (ide0(3,3)) ide0(3,3):Using r5 hash to sort names VFS: Can't find ext3 filesystem on dev ide0(3,3). VFS: Can't find ext2 filesystem on dev ide0(3,3). FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 03:03. Unable to identify CD-ROM format. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,3)) ... for (ide0(3,3)) ide0(3,3):Using r5 hash to sort names Adding Swap: 497972k swap-space (priority -1) Real Time Clock Driver v1.10f usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 03:12:55 Sep 12 2004 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1d.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xbf80, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.1 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.1 PCI: Sharing IRQ 11 with 02:01.2 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xbf40, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 PCI: Sharing IRQ 11 with 02:00.0 PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xbf20, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver usbkbd usbkbd.c: :USB HID Boot Protocol keyboard driver tg3.c:v3.8 (July 14, 2004) PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 eth0: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet XX.XX.XX.XX.XX.XXX eth0: HostTXDS[1] RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[0] PCI: Found IRQ 11 for device 01:00.0 PCI: Sharing IRQ 11 with 00:1d.0 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004 Intel 810 + AC97 Audio, version 1.01, 03:10:27 Sep 12 2004 PCI: Found IRQ 11 for device 00:1f.5 PCI: Sharing IRQ 11 with 00:1f.6 PCI: Sharing IRQ 11 with 02:03.0 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xbc40 and 0xb800, MEM 0xf4fff800 and 0xf4fff400, IRQ 11 i810: Intel ICH4 mmio at 0xe0d2c800 and 0xe0d2e400 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: 0x8384:0x7650 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,6)) ... for (ide0(3,6)) ide0(3,6):Using r5 hash to sort names ohci1394: $Rev: 1045 $ Ben Collins <[EMAIL PROTECTED]> PCI: Found IRQ 11 for device 02:01.2 PCI: Sharing IRQ 11 with 00:1d.1 PCI: Sharing IRQ 11 with 02:01.0 PCI: Sharing IRQ 11 with 02:01.1 ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[fafef800-fafeffff] Max Packet=[2048] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001 i810_rng hardware driver 0.9.8 loaded ieee1394: Host added: ID:BUS[0-00:1023] GUID[424fc0002a59ec10] hw_random: cannot enable RNG, aborting PCI: Found IRQ 11 for device 00:1d.7 PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 00:1d.7: irq 11, pci mem e0df3c00 usb.c: new USB bus registered, assigned bus number 4 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 32 is not supported by device 00:1d.7 ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected uhci.c: USB Universal Host Controller Interface driver v1.1 device eth0 entered promiscuous mode device eth0 left promiscuous mode apm: BIOS not found. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). apm: BIOS not found. apm: BIOS not found. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Intel(R) 855PM chipset agpgart: AGP aperture is 128M @ 0xe8000000 spurious 8259A interrupt: IRQ7.
--=_fourier.ujf-gre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]