Package: hal Version: 0.4.6-1 Severity: normal -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Whenever I attach my digital camera to the USB port, it takes 60 seconds until it appears in nautilus. (The relevant lines from my syslog follow). I don't have any entries in /etc/fstab for the device. I'm not sure whether this is a problem with hald or with hotplug; I'm reporting it here because hald is the process which complains about the timeout. I'm using the Debian stock kernel-image-2.6.10-1-k7; my USB controller is reported as follows by lspci: USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) [syslog] Jan 25 23:10:59 zarathustra kernel: usb 5-8: new high speed USB device using ehci_hcd and address 2 Jan 25 23:11:00 zarathustra kernel: Initializing USB Mass Storage driver... Jan 25 23:11:00 zarathustra usb.agent[2061]: usb-storage: loaded successfully Jan 25 23:11:00 zarathustra kernel: scsi3 : SCSI emulation for USB Mass Storage devices Jan 25 23:11:00 zarathustra kernel: usbcore: registered new driver usb-storage Jan 25 23:11:00 zarathustra kernel: USB Mass Storage support registered. Jan 25 23:11:00 zarathustra kernel: usb-storage: device found at 2 Jan 25 23:11:00 zarathustra kernel: usb-storage: waiting for device to settle before scanning Jan 25 23:11:05 zarathustra kernel: Vendor: Sony Model: Sony DSC Rev: 5.00 Jan 25 23:11:05 zarathustra kernel: Type: Direct-Access ANSI SCSI revision: 00 Jan 25 23:11:05 zarathustra kernel: SCSI device sdc: 2001888 512-byte hdwr sectors (1025 MB) Jan 25 23:11:05 zarathustra kernel: sdc: assuming Write Enabled Jan 25 23:11:05 zarathustra kernel: sdc: assuming drive cache: write through Jan 25 23:11:05 zarathustra kernel: SCSI device sdc: 2001888 512-byte hdwr sectors (1025 MB) Jan 25 23:11:05 zarathustra kernel: sdc: assuming Write Enabled Jan 25 23:11:05 zarathustra kernel: sdc: assuming drive cache: write through Jan 25 23:11:05 zarathustra kernel: /dev/scsi/host3/bus0/target0/lun0: p1 Jan 25 23:11:05 zarathustra kernel: Attached scsi removable disk sdc at scsi3, channel 0, id 0, lun 0 Jan 25 23:11:05 zarathustra kernel: usb-storage: device scan complete Jan 25 23:11:05 zarathustra udev[2179]: configured rule in '/etc/udev/rules.d/z_hal-plugdev.rules' at line 2 applied, 'sdc' becomes '%k' Jan 25 23:11:05 zarathustra udev[2179]: creating device node '/dev/sdc' Jan 25 23:11:05 zarathustra udev[2186]: configured rule in '/etc/udev/rules.d/z_hal-plugdev.rules' at line 2 applied, 'sdc1' becomes '%k' Jan 25 23:11:05 zarathustra udev[2186]: creating device node '/dev/sdc1' Jan 25 23:11:05 zarathustra scsi.agent[2192]: disk at /devices/pci0000:00/0000:00:10.4/usb5/5-8/5-8:1.0/host3/target3:0:0/3:0:0:0 Jan 25 23:12:05 zarathustra kernel: usb 5-8: reset high speed USB device using ehci_hcd and address 2 Jan 25 23:12:05 zarathustra hald[5352]: Timed out waiting for hotplug event 1133. Rebasing to 1133 Jan 25 23:12:08 zarathustra kernel: UDF-fs: No VRS found Jan 25 23:12:08 zarathustra kernel: UDF-fs: No VRS found Jan 25 23:12:08 zarathustra kernel: Unable to identify CD-ROM format. Jan 25 23:12:09 zarathustra kernel: Unable to identify CD-ROM format. Jan 25 23:12:09 zarathustra kernel: FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [end syslog] - -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.10-1-k7 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages hal depends on: ii adduser 3.59 Add and remove users and groups ii dbus-1 0.23-1 simple interprocess messaging syst ii dbus-glib-1 0.23-1 simple interprocess messaging syst ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libcap1 1:1.10-14 support for getting/setting POSIX. ii libexpat1 1.95.8-1 XML parsing C library - runtime li ii libglib2.0-0 2.6.1-3 The GLib library of C routines ii libhal-storage0 0.4.6-1 Hardware Abstraction Layer - share ii libhal0 0.4.6-1 Hardware Abstraction Layer - share ii libpopt0 1.7-5 lib for parsing cmdline parameters ii pciutils 1:2.1.11-15 Linux PCI Utilities ii udev 0.050-5 /dev/ management daemon ii usbutils 0.11+cvs20041108-1 USB console utilities - -- no debconf information -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFB9sa+m2HPKfVbHyoRAoSJAKC7YWblrOm1UxO054b7d4+m842UXACfSyoS 6STImGNtlKNQvcWp6nZvQ94= =LyY+ -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
