Package: installation-reports INSTALL REPORT
Debian-installer-version: 2005-01-24 http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc2/sarge-i386-businesscard.iso uname -a: Date: Mi Jan 24 19:02:32 CET 2005 Method: How did you install? What did you boot off? If network install, from where? Proxied? - Businesscard with FTP - CD - ftp.de.debian.org - no proxy Machine: SONY VAIO PCG-F709 Processor: Pentium III (Coppermine) Memory: 256744 kB Root Device: LVM on /dev/hda: /dev/mapper/system-root Root Size/partition table: Feel free to paste the full partition table, with notes on which partitions are mounted where. Disk /dev/hda: 18.1 GB, 18141806592 bytes 255 heads, 63 sectors/track, 2205 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 783 6289416 7 HPFS/NTFS /dev/hda2 784 1305 4192965 c W95 FAT32 (LBA) /dev/hda3 1306 2205 7229250 f W95 Ext'd (LBA) /dev/hda5 1306 1336 248976 83 Linux /boot /dev/hda6 1337 2205 6980211 8e Linux LVM VG system --- Logical volume --- LV Name /dev/system/swap VG Name system LV UUID o5CdM4-IoHf-F5DT-fZ8l-hO8G-5CA9-I8QacB LV Write Access read/write LV Status available # open 1 LV Size 512,00 MB Current LE 128 Segments 1 Allocation inherit Read ahead sectors 0 Block device 254:0 --- Logical volume --- LV Name /dev/system/root VG Name system LV UUID DxG1KF-c0c5-Xy2t-I2st-j0F6-s9YT-Mk91F1 LV Write Access read/write LV Status available # open 1 LV Size 6,16 GB Current LE 1576 Segments 1 Allocation inherit Read ahead sectors 0 Block device 254:1 Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03) 0000:00:08.0 FireWire (IEEE 1394): Sony Corporation CXD3222 i.LINK Controller (rev 02) 0000:00:09.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S Audio Controller] (rev 02) 0000:00:0a.0 Communication controller: Conexant HSF 56k Data/Fax Modem (Mob WorldW SmartDAA) (rev 01) 0000:00:0c.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80) 0000:00:0c.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80) 0000:01:00.0 VGA compatible controller: Neomagic Corporation NM2380 [MagicMedia 256XL+] (rev 10) 0000:06:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03) 0000:06:00.1 Serial controller: Xircom Cardbus Ethernet + 56k Modem (rev 03) 0000:00:00.0 0600: 8086:7190 (rev 03) 0000:00:01.0 0604: 8086:7191 (rev 03) 0000:00:07.0 0601: 8086:7110 (rev 02) 0000:00:07.1 0101: 8086:7111 (rev 01) 0000:00:07.2 0c03: 8086:7112 (rev 01) 0000:00:07.3 0680: 8086:7113 (rev 03) 0000:00:08.0 0c00: 104d:8039 (rev 02) 0000:00:09.0 0401: 1073:0010 (rev 02) 0000:00:0a.0 0780: 14f1:2443 (rev 01) 0000:00:0c.0 0607: 1180:0478 (rev 80) 0000:00:0c.1 0607: 1180:0478 (rev 80) 0000:01:00.0 0300: 10c8:0016 (rev 10) 0000:06:00.0 0200: 115d:0003 (rev 03) 0000:06:00.1 0700: 115d:0103 (rev 03) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [E] Install boot loader: [ ] Reboot: [ ] Comments/Problems: The actual 2.6 kernel won't install on a LVM root partition because it needs dmsetup which hasn't been installed prior to the kernel installation. Maybe one should just add dmsetup to the list of packages that have to be installed if the root fs is on a LVM device. Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]