Package: installation-reports INSTALL REPORT
Debian-installer-version: 2005-01-13, official sarge-i386-netinst.iso uname -a: Linux eva 2.4.27-2-686 #1 Thu Dec 30 18:26:31 JST 2004 i686 GNU/Linux Date: 2005-01-15 Method: bootstrapping (-- more on this later). Machine: Acer TravelMate 4000WLMi notebook Processor: Intel(R) Pentium(R) M processor 1.40GHz Memory: 512Mb Root Device: IDE Root Size/partition table: /dev/hda1 : start= 63, size= 6152832, Id=12 Acer Disk-to-Disk recovery /dev/hda2 : start= 6152895, size= 8385930, Id=83 / /dev/hda3 : start= 14538825, size= 20964825, Id= c, bootable XP /dev/hda4 : start= 35503650, size= 81706590, Id= f /dev/hda5 : start= 35503713, size= 67087377, Id= b /dev/hda6 : start=102591153, size= 6297417, Id=83 /usr/local /dev/hda7 : start=108888633, size= 8321607, Id=83 /home I have installed grub on /dev/hda and use bootpart on XP (default bootable partition) to boot on Debian Output of lspci: 0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02) 0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02) 0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 855GME GMCH Host-to-AGP Bridge (Virtual PCI-to-PCI) (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03) 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) 0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 0000:02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01) 0000:02:04.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05) 0000:02:06.0 CardBus bridge: Texas Instruments: Unknown device 8031 0000:02:06.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032 0000:02:06.3 Unknown mass storage controller: Texas Instruments: Unknown device 8033 Output of lspci -n: 0000:00:00.0 0600: 8086:3580 (rev 02) 0000:00:00.1 0880: 8086:3584 (rev 02) 0000:00:00.3 0880: 8086:3585 (rev 02) 0000:00:01.0 0604: 8086:3581 (rev 02) 0000:00:1d.0 0c03: 8086:24c2 (rev 03) 0000:00:1d.1 0c03: 8086:24c4 (rev 03) 0000:00:1d.2 0c03: 8086:24c7 (rev 03) 0000:00:1d.7 0c03: 8086:24cd (rev 03) 0000:00:1e.0 0604: 8086:2448 (rev 83) 0000:00:1f.0 0601: 8086:24cc (rev 03) 0000:00:1f.1 0101: 8086:24ca (rev 03) 0000:00:1f.3 0c05: 8086:24c3 (rev 03) 0000:00:1f.5 0401: 8086:24c5 (rev 03) 0000:00:1f.6 0703: 8086:24c6 (rev 03) 0000:01:00.0 0300: 1002:4e50 0000:02:02.0 0200: 14e4:4401 (rev 01) 0000:02:04.0 0280: 8086:4220 (rev 05) 0000:02:06.0 0607: 104c:8031 0000:02:06.2 0c00: 104c:8032 0000:02:06.3 0180: 104c:8033 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [E] Detect hard drives: [E] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [E] Comments/Problems: There is an incompatibility between the kernel and my hardhare. This prevents me booting on most normal ways - e.g. using knoppix or Debian default boot methods. I managed to boot knoppix, using the failsafe option. Debian should also have a way to omit utilizing some of my hardware, to help the system boot on kernel incompatibilities. The boot image (and all other boot debian images I tried) did not work. The system crashed on loading some kernel modules. I booted using knoppix, formatted the partitions, and used the bootstrapping to install the system from the network. I understand that this is a kernel problem, so I tried all other availabe (precompiled) versions of the kernel, but the module still crashes the system. I include later information about this problem (with one of ythe versions of the kernel) In order to be able to boot later, I had to prohibit loading the i810_audio module. Every time Debian rebuilds the modules.conf file, my system is not bootable, and I have to boot using knoppix to correct this (alias i810_audio off). Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] Here is how I can reproduce the problem, and # modprobe i810_audio Note: /etc/modules.conf is more recent than /lib/modules/2.4.27-1-386/modules.dep Intel 810 + AC97 Audio, version 1.01, 19:46:39 Dec 1 2004 PCI: Found IRQ 10 for device 00:1f.5 PCI: Sharing IRQ 10 with 00:1f.3 PCI: Sharing IRQ 10 with 00:1f.6 PCI: Sharing IRQ 10 with 02:04.0 i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xd0000c00 and 0xd0000800, IRQ 10 i810: Intel ICH4 mmio at 0xe0929c00 and 0xe092b800 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Modem codec, id: CXT48 (Unknown) i810_audio: codec 0 is a softmodem - skipping. Unable to handle kernel NULL pointer dereference at virtual address 00000024 printing eip: e0920174 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<e0920174>] Not tainted EFLAGS: 00010282 eax: dd8ae400 ebx: 00000000 ecx: dd8ae400 edx: dd4ee0a0 esi: dd4ee070 edi: dd4ee108 ebp: dd4ee070 esp: c66dfe58 ds: 0018 es: 0018 ss: 0018 Process modprobe.moduti (pid: 8351, stackpage=c66df000) Stack: dd8ae400 dd4ee070 dd4ee108 e092512c e09236ca dd4ee070 ffffffff 00000000 00000032 dd4ee070 c0116755 dd4ee070 00000282 00000a04 dd4ee070 00000000 dd4ee070 e0923453 dd4ee070 dd4ee0a0 dd8ae400 00000001 00000000 00000001 Call Trace: [<e092512c>] [<e09236ca>] [<c0116755>] [<e0923453>] [<e092512c>] [<e0923d35>] [<e092512c>] [<e0925340>] [<c019e9d5>] [<e092512c>] [<e0925340>] [<c019ea2e>] [<e0925340>] [<e0924219>] [<e0925340>] [<e0924d60>] [<c0117307>] [<e0924fd8>] [<e0920060>] [<c01081fb>] Code: 8b 53 24 31 ff 83 7a 08 00 75 0d 66 83 a0 16 02 00 00 fb e9 Segmentation fault Here is information on the system, when booting Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS01 at 0x02f8 (irq = 3) is a 16550A PCI: Found IRQ 10 for device 00:1f.6 PCI: Sharing IRQ 10 with 00:1f.3 PCI: Sharing IRQ 10 with 00:1f.5 PCI: Sharing IRQ 10 with 02:04.0 COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 3788 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done. Freeing initrd memory: 3788k freed VFS: Mounted root (cramfs filesystem). Freeing unused kernel memory: 96k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide: late registration of driver. ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: Found IRQ 6 for device 00:1f.1 PCI: Sharing IRQ 6 with 00:1d.2 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: ST960821A, ATA DISK drive blk: queue e082eb60, I/O limit 4095Mb (mask 0xffffffff) hdc: PIONEER DVD-RW DVR-K14RA, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: 117210240 sectors (60012 MB) w/8192KiB Cache, CHS=7296/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 > Journalled Block Device driver loaded EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Real Time Clock Driver v1.10f hdc: attached ide-cdrom driver. hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 b44.c:v0.93 (Mar, 2004) PCI: Found IRQ 6 for device 02:02.0 PCI: Sharing IRQ 6 with 00:1d.1 eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:69:47:48 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices ohci1394: $Rev: 1045 $ Ben Collins <[EMAIL PROTECTED]> PCI: Found IRQ 10 for device 02:06.2 PCI: Sharing IRQ 10 with 02:06.0 PCI: Sharing IRQ 10 with 02:06.3 ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d020a000-d020a7ff] Max Packet=[2048] Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Enabling device 02:06.0 (0104 -> 0106) PCI: Found IRQ 10 for device 02:06.0 PCI: Sharing IRQ 10 with 02:06.2 PCI: Sharing IRQ 10 with 02:06.3 Yenta ISA IRQ mask 0x08b8, PCI irq 10 Socket status: 30000006 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node dfb115a0), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node dfb115a0), AE_NOT_EXIST shpchp: acpi_shpchprm:\_SB_.PCI0 _CRS fail=0x6 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _CRS fail=0x6 ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.HPET._STA] (Node dfb10620), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.HPET._STA] (Node dfb10620), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKA._STA] (Node dfb10740), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKA._STA] (Node dfb10740), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKB._STA] (Node dfb10840), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKB._STA] (Node dfb10840), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKC._STA] (Node dfb10940), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKC._STA] (Node dfb10940), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKD._STA] (Node dfb10a40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKD._STA] (Node dfb10a40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKE._STA] (Node dfb10b40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKE._STA] (Node dfb10b40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKF._STA] (Node dfb10c40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKF._STA] (Node dfb10c40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKG._STA] (Node dfb10d40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKG._STA] (Node dfb10d40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKH._STA] (Node dfb10e40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKH._STA] (Node dfb10e40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOUE._STA] (Node c158e580), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOUE._STA] (Node c158e580), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOU2._STA] (Node c158e620), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOU2._STA] (Node c158e620), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.ECP_._STA] (Node c158e840), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.ECP_._STA] (Node c158e840), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.EPP_._STA] (Node c158e980), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.EPP_._STA] (Node c158e980), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPTB._STA] (Node c158eac0), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPTB._STA] (Node c158eac0), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPT_._STA] (Node c158ec00), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPT_._STA] (Node c158ec00), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.COMA._STA] (Node c158ed40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.COMA._STA] (Node c158ed40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.FIR_._STA] (Node c158ee80), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.FIR_._STA] (Node c158ee80), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SECN._STA] (Node c1589620), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SECN._STA] (Node c1589620), AE_NOT_EXIST shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00003189ab] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node dfb115a0), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node dfb115a0), AE_NOT_EXIST pciehp: acpi_pciehprm:\_SB_.PCI0 _CRS fail=0x6 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _CRS fail=0x6 ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.HPET._STA] (Node dfb10620), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.HPET._STA] (Node dfb10620), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKA._STA] (Node dfb10740), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKA._STA] (Node dfb10740), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKB._STA] (Node dfb10840), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKB._STA] (Node dfb10840), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKC._STA] (Node dfb10940), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKC._STA] (Node dfb10940), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKD._STA] (Node dfb10a40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKD._STA] (Node dfb10a40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKE._STA] (Node dfb10b40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKE._STA] (Node dfb10b40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKF._STA] (Node dfb10c40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKF._STA] (Node dfb10c40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKG._STA] (Node dfb10d40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKG._STA] (Node dfb10d40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKH._STA] (Node dfb10e40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKH._STA] (Node dfb10e40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOUE._STA] (Node c158e580), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOUE._STA] (Node c158e580), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOU2._STA] (Node c158e620), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOU2._STA] (Node c158e620), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.ECP_._STA] (Node c158e840), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.ECP_._STA] (Node c158e840), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.EPP_._STA] (Node c158e980), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.EPP_._STA] (Node c158e980), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPTB._STA] (Node c158eac0), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPTB._STA] (Node c158eac0), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPT_._STA] (Node c158ec00), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPT_._STA] (Node c158ec00), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.COMA._STA] (Node c158ed40), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.COMA._STA] (Node c158ed40), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.FIR_._STA] (Node c158ee80), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.FIR_._STA] (Node c158ee80), AE_NOT_EXIST ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SECN._STA] (Node c1589620), AE_NOT_EXIST ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SECN._STA] (Node c1589620), AE_NOT_EXIST pciehp: PCI Express Hot Plug Controller Driver version: 0.5 i810_rng hardware driver 0.9.8 loaded hw_random: cannot enable RNG, aborting usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 10 for device 00:1d.7 PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 00:1d.7: irq 10, pci mem e08f3000 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 32 is not supported by device 00:1d.7 ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 6 for device 00:1d.0 PCI: Sharing IRQ 6 with 01:00.0 PCI: Setting latency timer of device 00:1d.0 to 64 uhci.c: USB UHCI at I/O 0x1800, IRQ 6 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 6 for device 00:1d.1 PCI: Sharing IRQ 6 with 02:02.0 PCI: Setting latency timer of device 00:1d.1 to 64 uhci.c: USB UHCI at I/O 0x1820, IRQ 6 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 6 for device 00:1d.2 PCI: Sharing IRQ 6 with 00:1f.1 PCI: Setting latency timer of device 00:1d.2 to 64 uhci.c: USB UHCI at I/O 0x1840, IRQ 6 usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected b44: eth0: Link is down. cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x807 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0a00-0x0aff: clean. unloading Kernel Card Services Here is information on the system after booting Script started on Sun Jan 16 13:38:23 2005 eva:~# modprobe sound eva:~# modprobe ac97_codec eva:~# modprobe i810_audio Segmentation fault eva:~# lsmod Module Size Used by Not tainted i810_audio 21372 1 (initializing) ac97_codec 11252 0 [i810_audio] sound 48872 0 (unused) soundcore 3268 2 [i810_audio sound] af_packet 11048 0 (autoclean) uhci 21468 0 (unused) ehci-hcd 14796 0 (unused) usbcore 52268 1 [uhci ehci-hcd] i810_rng 2368 0 (unused) yenta_socket 8804 0 pcmcia_core 38020 0 [yenta_socket] ohci1394 21648 0 (unused) ieee1394 178724 0 [ohci1394] ide-scsi 8272 0 scsi_mod 86052 1 [ide-scsi] b44 12396 1 ide-cd 27072 0 cdrom 26212 0 [ide-cd] rtc 5768 0 (autoclean) ext3 65388 1 (autoclean) jbd 34628 1 (autoclean) [ext3] ide-detect 288 0 (autoclean) (unused) piix 7784 1 (autoclean) ide-disk 12448 1 (autoclean) ide-core 91832 1 (autoclean) [ide-scsi ide-cd ide-detect piix ide-disk] unix 12720 0 (autoclean) eva:~# cat /etc/modules.conf ### This file is automatically generated by update-modules" # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. # ### update-modules: start processing /etc/modutils/0keep # DO NOT MODIFY THIS FILE! # This file is not marked as conffile to make sure if you upgrade modutils # it will be restored in case some modifications have been made. # # The keep command is necessary to prevent insmod and friends from ignoring # the builtin defaults of a path-statement is encountered. Until all other # packages use the new `add path'-statement this keep-statement is essential # to keep your system working keep ### update-modules: end processing /etc/modutils/0keep ### update-modules: start processing /etc/modutils/actions # Special actions that are needed for some modules # The BTTV module does not load the tuner module automatically, # so do that in here post-install bttv insmod tuner post-remove bttv rmmod tuner ### update-modules: end processing /etc/modutils/actions ### update-modules: start processing /etc/modutils/aliases # Aliases to tell insmod/modprobe which modules to use # Uncomment the network protocols you don't want loaded: # alias net-pf-1 off # Unix # alias net-pf-2 off # IPv4 # alias net-pf-3 off # Amateur Radio AX.25 # alias net-pf-4 off # IPX # alias net-pf-5 off # DDP / appletalk # alias net-pf-6 off # Amateur Radio NET/ROM # alias net-pf-9 off # X.25 # alias net-pf-10 off # IPv6 # alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP # alias net-pf-19 off # Acorn Econet alias net-pf-24 pppoe alias char-major-10-175 agpgart alias char-major-10-200 tun alias char-major-81 bttv alias char-major-108 ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate # Crypto modules (see http://www.kerneli.org/) alias loop-xfer-gen-0 loop_gen alias loop-xfer-3 loop_fish2 alias loop-xfer-gen-10 loop_gen alias cipher-2 des alias cipher-3 fish2 alias cipher-4 blowfish alias cipher-6 idea alias cipher-7 serp6f alias cipher-8 mars6 alias cipher-11 rc62 alias cipher-15 dfc2 alias cipher-16 rijndael alias cipher-17 rc5 ### update-modules: end processing /etc/modutils/aliases ### update-modules: start processing /etc/modutils/paths # This file contains a list of paths that modprobe should scan, # beside the ones that are compiled into the modutils tools # themselves. ### update-modules: end processing /etc/modutils/paths ### update-modules: start processing /etc/modutils/arch/i386 alias parport_lowlevel parport_pc alias char-major-10-144 nvram alias binfmt-0064 binfmt_aout alias char-major-10-135 rtc ### update-modules: end processing /etc/modutils/arch/i386 # alias i810_audio off # alias ac97_codec off # alias soundcore off # alias sound off eva:~# uname -a Linux eva 2.4.27-1-386 #1 Wed Dec 1 19:43:08 JST 2004 i686 GNU/Linux eva:~# ls -l /boot total 5180 -rw-r--r-- 1 root root 541783 Dec 1 11:29 System.map-2.4.27-1-386 -rw-r--r-- 1 root root 44853 Dec 1 10:42 config-2.4.27-1-386 drwxr-xr-x 2 root root 4096 Jan 15 19:02 grub -rw-r--r-- 1 root root 3878912 Jan 13 05:22 initrd.img-2.4.27-1-386 -rw-r--r-- 1 root root 816054 Dec 1 11:28 vmlinuz-2.4.27-1-386 eva:~# exit Script done on Sun Jan 16 13:39:47 2005 Here is more information on my modem, that I think causes the problem (possibly together with the sound card): UPDATE=2005_Jan_11 ONLY use scanModem downloaded as: http://linmodems.technion.ac.il/packages/scanModem.gz ./scanModem should ONLY be run within a Linux/UNIX partition. If within a MicroSoft/DOS partition, abort with Ctrl-C now !!! Copy scanModem.gz to your Linux partition and restart. Providing detail for device at PCI_bus 0000:00:1f.6 with vendor-ID:device-ID ----:---- Class 0703: 8086:24c6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic]) SubSystem 1025:0064 Acer Incorporated [ALI]: Unknown device 0064 0000:00:1f.6 0703: 8086:24c6 (rev 03) Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at 2400 [size=256] I/O ports at 2000 [size=128] -----PCI_IDs------- --CompilerVer- Feature List: Primary Subsystem Distr KernelVer kernel default CPU ./scanModem test 8086:24c6 1025:0064 debian 2.4.27-1-386 3.3.5 3.3.5 i686 The soft modem Subsystem operates under a controller 8086:24c6 82801DB ICH4 capable of supporting under Linux AT LEAST modem Subsystem chips from manufacturers: Broadcom AgereSystems Conexant Intel Smartlink The modem has a Conexant codec: CXT and there is support for the modem controller: 8086:24c6 82801DB ICH4 Some Linux Distributions include the hsfmodem driver. Search your packages information for "hsfmodem" and "Conexant". If not found there, download a hsfmodem package from http://www.linuxant.com . If there is not an exact match with your Linux distribution and your kernel version: 2.4.27-1-386 then kernel-sources must be prepared as described in Modem/DriverCompiling.txt before the hsfmodem driver compiling can be successfull. Get and install hsfmodem drivers from http://www.linuxant.com Please browse the folder Modem/ containing the following files: 1stRead.txt DriverCompiling.txt General.txt ModemData.txt Rational.txt Slmodem.txt SoftModem.txt Testing.txt UNSUBSCRIBE.txt Let me know if you need more information on my system. Sarantos Kapidakis [EMAIL PROTECTED]