Package: linux-2.6 Version: 3.2.15-1 Severity: normal Hi.
I'm using Debian Wheezy/Testing, kernel 3.2.15-1 on a HP PowerBook 4515s laptop. I noticed that /var/log/syslog is getting spammed with messages from laptop-mode, like in the attached syslog-laptop-mode_spam.log.gz file. Also, at the same time, "upower --monitor" shows the messages from upower-monitor.log.gz. In Windows XP I don't see any issue with the battery and also running HP Battery Check [1] I got the result that the battery is functioning correctly, but is week (admittedly it is more than a year old, but still holds a charge for 30 mins). 1: http://h20239.www2.hp.com/techcenter/battery/battery_ts.htm So it looks like a kernel issue. I started checking the udev events with 'udevadm monitor --property' and got the messages from the udevadm_monitor.log.gz file. This happens only when the battery and the power cable are connected. When running with the battery removed or without the power cable connected (running only on battery) this is not happening. Here are some more discussions about this: - a Debian Bug reported [2] - and also a thread on the Upower mailinglist [3] 2: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638970 3: http://lists.freedesktop.org/archives/devkit-devel/2012-February/001225.html I hope this gets solved rather soon. With top, I see the upowerd daemon using quite a lot of CPU from time to time. Thanks. -- Package-specific info: ** Version: Linux version 3.2.0-2-686-pae (Debian 3.2.15-1) (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-3) ) #1 SMP Sun Apr 15 17:56:31 UTC 2012 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae root=UUID=c82fd34e-9549-4229-b8d2-5448428acfeb ro quiet splash acpi_backlight=vendor ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [88062.148652] smpboot cpu 1: start_ip = 9b000 [88062.047450] Initializing CPU#1 [88062.047450] Calibrating delay loop (skipped) already calibrated this CPU [88062.160540] NMI watchdog enabled, takes one hw-pmu counter. [88062.161276] CPU1 is up [88062.162486] ACPI: Waking up from system sleep state S3 [88062.208247] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [88062.208253] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [88062.208292] pcieport 0000:00:07.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [88062.208297] pcieport 0000:00:07.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [88062.208336] pcieport 0000:00:09.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [88062.208341] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [88062.208429] ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [88062.208435] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300007) [88062.208458] ahci 0000:00:11.0: set SATA to AHCI mode [88062.208484] ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013) [88062.208526] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI [88062.208584] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI [88062.224072] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xd4409500-0xd44095ff] (PCI address [0xd4409500-0xd44095ff]) [88062.224106] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) [88062.224124] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI [88062.224130] ehci_hcd 0000:00:12.2: PME# disabled [88062.224157] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013) [88062.224195] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI [88062.224254] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI [88062.240062] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xd4409400-0xd44094ff] (PCI address [0xd4409400-0xd44094ff]) [88062.240097] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) [88062.240115] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI [88062.240121] ehci_hcd 0000:00:13.2: PME# disabled [88062.240189] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) [88062.240279] ohci_hcd 0000:00:14.5: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013) [88062.240317] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI [88062.240385] fglrx_pci 0000:01:05.0: restoring config space at offset 0x9 (was 0x0, writing 0xd4200000) [88062.240408] snd_hda_intel 0000:01:05.1: restoring config space at offset 0xf (was 0x2ff, writing 0x20a) [88062.240420] snd_hda_intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xd4310000) [88062.240424] snd_hda_intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [88062.240430] snd_hda_intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003) [88062.240503] sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [88062.240662] wl 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [88062.240834] PM: early resume of devices complete after 32.700 msecs [88062.240934] ahci 0000:00:11.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [88062.240964] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [88062.241013] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [88062.241036] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [88062.241042] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [88062.241063] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [88062.241085] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [88062.241131] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [88062.241171] snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [88062.241177] fglrx_pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [88062.241183] snd_hda_intel 0000:01:05.1: setting latency timer to 64 [88062.241185] fglrx_pci 0000:01:05.0: setting latency timer to 64 [88062.241209] sky2 0000:02:00.0: wake-up capability disabled by ACPI [88062.241225] sky2 0000:02:00.0: PME# disabled [88062.241504] wl 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [88062.241514] wl 0000:06:00.0: setting latency timer to 64 [88062.245145] [fglrx] Power up the ASIC [88062.245866] [fglrx] Preparing resume fglrx in kernel. [88062.246395] [fglrx] Resuming fglrx in kernel completed. [88062.246619] [fglrx] IRQ 18 Enabled [88062.253968] sd 0:0:0:0: [sda] Starting disk [88062.277444] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 [88062.277452] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 [88062.277459] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 [88062.277463] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 [88062.277471] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [88062.564104] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [88062.564143] ata3: SATA link down (SStatus 0 SControl 300) [88062.564176] ata4: SATA link down (SStatus 0 SControl 300) [88062.584038] usb 6-3: reset full-speed USB device number 2 using ohci_hcd [88062.620150] ata2.00: configured for UDMA/100 [88062.752118] btusb 6-3:1.0: no reset_resume for driver btusb? [88062.752121] btusb 6-3:1.1: no reset_resume for driver btusb? [88062.852117] usb 2-2: reset high-speed USB device number 2 using ehci_hcd [88063.852133] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [88063.857300] ata1.00: configured for UDMA/100 [88063.896217] PM: resume of devices complete after 1655.346 msecs [88063.896648] PM: Finishing wakeup. [88063.896650] Restarting tasks ... done. [88063.912078] video LNXVIDEO:00: Restoring backlight state [88066.023074] sky2 0000:02:00.0: eth1: enabling interface [88066.024362] ADDRCONF(NETDEV_UP): eth1: link is not ready [88209.832079] usb 3-1: new low-speed USB device number 3 using ohci_hcd [88210.001957] usb 3-1: New USB device found, idVendor=046d, idProduct=c050 [88210.001977] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [88210.001991] usb 3-1: Product: USB-PS/2 Optical Mouse [88210.002001] usb 3-1: Manufacturer: Logitech [88210.011128] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input13 [88210.011823] generic-usb 0003:046D:C050.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0 [88397.730508] [fglrx] IRQ 18 Disabled [88398.747983] [fglrx] GART Table is not in FRAME_BUFFER range [88398.748899] [fglrx] Could not enable MSI; System prevented initialization [88398.750634] [fglrx] Firegl kernel thread PID: 28884 [88398.751023] [fglrx] Firegl kernel thread PID: 28885 [88398.751211] [fglrx] Firegl kernel thread PID: 28886 [88398.751664] [fglrx] IRQ 18 Enabled [88399.166507] [fglrx] Gart USWC size:872 M. [88399.166517] [fglrx] Gart cacheable size:344 M. [88399.166527] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [88399.166533] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 ** Model information not available ** Loaded modules: usbhid hid michael_mic arc4 ecb pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) powernow_k8 mperf cpufreq_userspace cpufreq_conservative cpufreq_stats cpufreq_powersave parport_pc ppdev lp parport bnep rfcomm binfmt_misc uinput deflate ctr twofish_generic twofish_i586 twofish_common camellia serpent blowfish_generic blowfish_common cast5 des_generic cbc cryptd aes_i586 aes_generic xcbc rmd160 sha512_generic sha256_generic sha1_generic hmac crypto_null af_key fuse loop snd_hda_codec_hdmi snd_hda_codec_analog snd_hda_intel btusb uvcvideo snd_hda_codec snd_hwdep bluetooth snd_pcm_oss snd_mixer_oss snd_pcm videodev media snd_page_alloc snd_seq_midi crc16 snd_seq_midi_event lib80211_crypt_tkip wl(P) sp5100_tco joydev snd_rawmidi snd_seq fglrx(P) snd_seq_device snd_timer i2c_piix4 snd i2c_core hp_wmi psmouse sparse_keymap hp_accel rfkill lib80211 soundcore lis3lv02d serio_raw input_polldev pcspkr evdev k10temp shpchp ac battery power_supply processor container wmi ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate sd_mod crc_t10dif sr_mod cdrom video ahci libahci fan libata thermal thermal_sys ohci_hcd ehci_hcd button usbcore scsi_mod sky2 usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: d4200000-d43fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00004fff Memory behind bridge: d3100000-d41fffff Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=05, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d2100000-d30fffff Prefetchable memory behind bridge: 00000000d1000000-00000000d1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 Memory behind bridge: d2000000-d20fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at 6018 [size=8] Region 1: I/O ports at 6024 [size=4] Region 2: I/O ports at 6010 [size=8] Region 3: I/O ports at 6020 [size=4] Region 4: I/O ports at 6000 [size=16] Region 5: Memory at d4409000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4408000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4407000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at d4409500 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d4406000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d4405000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at d4409400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR+ INTx- Capabilities: <access denied> Kernel driver in use: piix4_smbus 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Hewlett-Packard Company Device [103c:3078] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=80, subordinate=8f, sec-latency=64 I/O behind bridge: 00001000-00001fff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at d4404000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 5000 [size=256] Region 2: Memory at d4300000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at d4200000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: fglrx_pci 01:05.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] [1002:960f] Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at d4310000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller [11ab:436c] (rev 10) Subsystem: Hewlett-Packard Company Device [103c:3077] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at d3100000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 3000 [size=256] Expansion ROM at d0000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 06:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:1508] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d2000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: wl ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd Bus 006 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045] Bus 003 Device 003: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-2-686-pae depends on: ii debconf [debconf-2.0] 1.5.42 ii initramfs-tools [linux-initramfs-tool] 0.102 ii kmod 6-2 ii linux-base 3.5 ii module-init-tools 6-2 Versions of packages linux-image-3.2.0-2-686-pae recommends: ii firmware-linux-free 3 ii libc6-i686 2.13-30 Versions of packages linux-image-3.2.0-2-686-pae suggests: pn grub-pc 1.99-21 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-2-686-pae is related to: pn firmware-atheros 0.35 pn firmware-bnx2 0.35 pn firmware-bnx2x 0.35 pn firmware-brcm80211 <none> pn firmware-intelwimax 0.35 pn firmware-ipw2x00 0.35 pn firmware-ivtv 0.35 pn firmware-iwlwifi 0.35 pn firmware-libertas 0.35 pn firmware-linux 0.35 pn firmware-linux-nonfree 0.35 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic 0.35 pn firmware-ralink 0.35 pn firmware-realtek 0.35 pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae: true linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae: false linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:
syslog-laptop-mode_spam.log.gz
Description: GNU Zip compressed data
udevadm_monitor.log.gz
Description: GNU Zip compressed data
upower-monitor.log.gz
Description: GNU Zip compressed data
