FWIW I've had this running just fine since my earlier posts. Several power outages have been dealt with perfectly.
I haven't had the time to set up and test debug logs around RB but if this is the sticking point I'll try harder to find that time :) I'm happy to pull a fresh version and test. On 10/05/2012, at 21:58 , Charles Lepple wrote: > On May 10, 2012, at 4:38 AM, Arnaud Quette wrote: > >> 2012/5/10 Charles Lepple <clep...@gmail.com>: >>> On May 9, 2012, at 11:27 AM, Arnaud Quette wrote: >>> >>>> this thread has just popped again, but on the Debian side this time: >>>> http://bugs.debian.org/671444 >>>> >>>> what's exactly the situation of fixes WRT issues? >>>> the last mail I have on this thread is attached below... >>> >>> Attached is a patch corresponding to the following branch: >>> >>> https://github.com/clepple/nut/tree/git-LiebertPSP-scalefactor >>> >>> At this point, it is probably safe to merge. >> >> it applies fine on the trunk. >> should I go ahead and merge it? > > Sure, but is it possible to build a .deb for Alastair to test, just to make > sure we're fixing the same problem? (I'm not sure if Debian has something > like Ubuntu's PPA system.) > > Aside: it is annoying that with a 16-bit field for the USB PID, companies > insist on reusing the VID:PID combinations for drastically different firmware. > >> also, does it fix all the known issues related to this scaling factor? > > The two potential remaining problems are with ups.load and the RB flag, but > they are not as critical as the OB/LB flags. > >>> It does not, however, change the subdriver to liebert-hid. >> >> I'm not sure to get all the whizzbang that may hide behind this comment ;-) >> AFAIK, liebert-hid seems to be for Liebert OEM manufactured by >> Phoenixtec with a limited set of data. >> while belkin-hid has a more advanced approach. >> so it's fine as you did. the problem of subdriver naming is something >> else, that will never be able to completely address due to mergers, >> OEM, ... > > In this message, Alastair cited Pier's patch which changes the subdriver for > 10af:0001 from belkin-hid to liebert-hid. Due to the way that we match the > HID usages, we probably could have put the scale fixes in the liebert-hid > subdriver instead, but I agree that belkin-hid is probably the right mapping > under the hood. > > -- > Charles Lepple > clepple@gmail > > > > > _______________________________________________ > Nut-upsuser mailing list > nut-upsu...@lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
