Package: linux-2.6 Version: 3.2.17-1 Severity: normal Dear Maintainer, I've recently bought DWA-140 dongle, expecting it to work out-of-the-box. But I've omitted a fact that there are several revisions of DWA-140, with completely different hardware. So mine is DWA-140 rev.3, which is initially not working in Debian.
What have I done: 1. Inserted dongle. 2. Nothing interesting happened. 3. Searched web for the first time. 4. Tried the following solutions: a) modprobe rt2800usb Effect: no effect, some dmesg general 80211 messages b) echo "2001 3c15" > /sys/bus/usb/drivers/rt2800/new_id Effect: incorrect ID or similar message appeared in dmesg. c) used several versions of /lib/firmware/.../rt2870.bin Effect: no effect d) tried 2.6.32 from stable and 3.3 from experimental What actually worked was compiling Ralink drivers to get rt5370sta. That module is functional, but not present in Debian. Debian and internet suggest that correct module for such card (and others) should be rt2800usb. In fact, rt2800 sources: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=tree;f=drivers/net/wireless/rt2x00;h=bae2683595b9dd0906c26117a856e0938d909c0b;hb=HEAD contain 2001:3c15 USB ID. It should be visible with the following Debian settings: CONFIG_RT2800USB=m CONFIG_RT2800USB_RT33XX=y CONFIG_RT2800USB_RT35XX=y CONFIG_RT2800USB_RT53XX=y Unless "# CONFIG_RT2800USB_UNKNOWN is not set " is needed. Debian rt2800usb doesn't contain 2001 3c15 (checked with modinfo). Could you please check: 1. If such model can be enabled by some additional define in Linux kernel? 2. There's additional way to use that device (Debian way, not my custom kernel ralink driver)? Additional sources: 1. Ubuntu hardware support page https://help.ubuntu.com/community/HardwareSupportComponentsWirelessNetworkCardsDlink 2. Google search for 2001:3c15, linux, DWA-140, Ubuntu, Debian, ralink 3. Ralink webpage http://www.ralinktech.com/en/04_support/support.php?sn=501 I'm filing this bug as I can't see any other relevant in BTS, so others may benefit. Thank you for your time. -- Package-specific info: ** Version: Linux version 3.2.0-2-686-pae (Debian 3.2.17-1) (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP Sun May 13 07:51:23 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=e07cdee0-3fec-4d9f-9936-75655ff99f31 ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 22.936824] RTMP_TimerListAdd: add timer obj f86c76c8! [ 22.938244] -->RTUSBVenderReset [ 22.938370] <--RTUSBVenderReset [ 23.429368] 1. Phy Mode = 0 [ 23.429369] 2. Phy Mode = 0 [ 23.429370] NVM is Efuse and its size =2d[2d0-2fc] [ 23.478931] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc] [ 23.500653] 3. Phy Mode = 0 [ 23.503150] \x1b[mAntCfgInit: primary/secondary ant 0/1 [ 23.503151] \x1b[mRTMPSetPhyMode: channel is out of range, use first channel=1 [ 23.539856] MCS Set = 00 00 00 00 00 [ 23.550392] <==== rt28xx_init, Status=0 [ 23.551838] 0x1300 = 000a4200 [ 24.036713] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 348 [ 28.852066] r8169 0000:02:00.0: eth0: link down [ 28.852138] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.104017] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2171 [ 33.481950] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc] [ 33.740048] RTMP_TimerListAdd: add timer obj f86fcb70! [ 33.740050] RTMP_TimerListAdd: add timer obj f86fcbb8! [ 33.740051] RTMP_TimerListAdd: add timer obj f86fcc00! [ 33.740052] RTMP_TimerListAdd: add timer obj f86fcb28! [ 33.740053] RTMP_TimerListAdd: add timer obj f86fca50! [ 33.740054] RTMP_TimerListAdd: add timer obj f86fca98! [ 33.740055] RTMP_TimerListAdd: add timer obj f86c7628! [ 33.740056] RTMP_TimerListAdd: add timer obj f86b6ef0! [ 33.740057] RTMP_TimerListAdd: add timer obj f86b6f40! [ 33.740058] RTMP_TimerListAdd: add timer obj f86c7714! [ 33.740059] RTMP_TimerListAdd: add timer obj f86c7598! [ 33.740060] RTMP_TimerListAdd: add timer obj f86c76c8! [ 33.741472] -->RTUSBVenderReset [ 33.741596] <--RTUSBVenderReset [ 34.219757] 1. Phy Mode = 0 [ 34.219759] 2. Phy Mode = 0 [ 34.219760] NVM is Efuse and its size =2d[2d0-2fc] [ 34.269425] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc] [ 34.291147] 3. Phy Mode = 0 [ 34.293643] \x1b[mAntCfgInit: primary/secondary ant 0/1 [ 34.293644] \x1b[mMCS Set = 00 00 00 00 00 [ 34.340760] <==== rt28xx_init, Status=0 [ 34.342206] 0x1300 = 000a4200 [ 34.724619] r8169 0000:02:00.0: eth0: link down [ 34.724683] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 35.137099] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc] [ 35.395196] RTMP_TimerListAdd: add timer obj f86fcb70! [ 35.395198] RTMP_TimerListAdd: add timer obj f86fcbb8! [ 35.395199] RTMP_TimerListAdd: add timer obj f86fcc00! [ 35.395200] RTMP_TimerListAdd: add timer obj f86fcb28! [ 35.395201] RTMP_TimerListAdd: add timer obj f86fca50! [ 35.395202] RTMP_TimerListAdd: add timer obj f86fca98! [ 35.395203] RTMP_TimerListAdd: add timer obj f86c7628! [ 35.395204] RTMP_TimerListAdd: add timer obj f86b6ef0! [ 35.395205] RTMP_TimerListAdd: add timer obj f86b6f40! [ 35.395206] RTMP_TimerListAdd: add timer obj f86c7714! [ 35.395207] RTMP_TimerListAdd: add timer obj f86c7598! [ 35.395208] RTMP_TimerListAdd: add timer obj f86c76c8! [ 35.396612] -->RTUSBVenderReset [ 35.396736] <--RTUSBVenderReset [ 35.875022] 1. Phy Mode = 0 [ 35.875023] 2. Phy Mode = 0 [ 35.875024] NVM is Efuse and its size =2d[2d0-2fc] [ 35.924690] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc] [ 35.946411] 3. Phy Mode = 0 [ 35.948908] \x1b[mAntCfgInit: primary/secondary ant 0/1 [ 35.948909] \x1b[mMCS Set = 00 00 00 00 00 [ 35.996026] <==== rt28xx_init, Status=0 [ 35.997471] 0x1300 = 000a4200 [ 38.218265] /tmp/2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO/os/linux/../../common/cmm_asic.c:3069 assert KeyIdx < 4failed [ 38.218889] /tmp/2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO/os/linux/../../common/cmm_asic.c:3069 assert KeyIdx < 4failed [ 38.231360] ==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=11) [ 40.340767] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1685 [ 40.340875] ==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=11) [ 46.189077] ra0: no IPv6 routers present [ 121.840111] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 121.893732] ISO 9660 Extensions: RRIP_1991A [ 731.290457] usb 2-1.1: new full-speed USB device number 3 using ehci_hcd [ 731.383843] usb 2-1.1: New USB device found, idVendor=06bc, idProduct=0083 [ 731.383846] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 731.383848] usb 2-1.1: Product: USB Device [ 731.383849] usb 2-1.1: Manufacturer: OKI DATA CORP [ 731.465507] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x06BC pid 0x0083 [ 731.465517] usbcore: registered new interface driver usblp [ 768.910915] usblp0: removed [ 768.912327] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x06BC pid 0x0083 [ 771.750470] usblp0: removed [ 771.752057] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x06BC pid 0x0083 [ 860.846163] usblp0: removed [ 870.222598] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x06BC pid 0x0083 [ 936.853583] usblp0: removed [ 945.128460] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x06BC pid 0x0083 [ 1024.454198] usblp0: removed [ 1033.040654] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x06BC pid 0x0083 [ 1058.506964] usblp0: removed [ 1067.417385] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x06BC pid 0x0083 [ 1095.024314] usblp0: removed [ 1103.555930] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x06BC pid 0x0083 [ 1118.270664] usblp0: removed [ 1127.177903] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x06BC pid 0x0083 [ 1165.344219] usb 2-1.1: USB disconnect, device number 3 [ 1165.344344] usblp0: removed ** Model information not available ** Loaded modules: usblp nls_utf8 isofs parport_pc ppdev lp parport bnep rfcomm bluetooth rfkill nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc it87 hwmon_vid coretemp adm1021 loop snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc i915 snd_seq snd_seq_device snd_timer snd video rt5370sta(O) pcspkr drm_kms_helper drm i2c_algo_bit mxm_wmi i2c_i801 soundcore i2c_core evdev iTCO_wdt wmi iTCO_vendor_support processor button thermal_sys ext4 crc16 jbd2 mbcache usbhid hid sr_mod sd_mod cdrom crc_t10dif xhci_hcd ata_generic ata_piix ehci_hcd r8169 mii libata usbcore scsi_mod usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0112] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at fb800000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at ff00 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Giga-byte Technology Device [1458:1c3a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 12 Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: Giga-byte Technology Device [1458:a002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: dfa00000-dfbfffff Prefetchable memory behind bridge: 00000000dfc00000-00000000dfdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000fbe00000-00000000fbefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fbd00000-fbdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Z68 Express Chipset Family LPC Controller [8086:1c44] (rev 05) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller [8086:1c00] (rev 05) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at fe00 [size=8] Region 1: I/O ports at fd00 [size=4] Region 2: I/O ports at fc00 [size=8] Region 3: I/O ports at fb00 [size=4] Region 4: I/O ports at fa00 [size=16] Region 5: I/O ports at f900 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus 00:1f.5 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller [8086:1c08] (rev 05) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at f700 [size=8] Region 1: I/O ports at f600 [size=4] Region 2: I/O ports at f500 [size=8] Region 3: I/O ports at f400 [size=4] Region 4: I/O ports at f300 [size=16] Region 5: I/O ports at f200 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 40 Region 0: I/O ports at ee00 [size=256] Region 2: Memory at fbeff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fbef8000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 03:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI]) Subsystem: Giga-byte Technology Device [1458:5007] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at fbdf8000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 2001:3c15 D-Link Corp. Bus 001 Device 004: ID 1241:1166 Belkin MI-2150 Trust Mouse -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-2-686-pae depends on: ii debconf [debconf-2.0] 1.5.43 ii initramfs-tools [linux-initramfs-tool] 0.102 ii kmod 8-1 ii linux-base 3.5 ii module-init-tools 8-1 Versions of packages linux-image-3.2.0-2-686-pae recommends: ii firmware-linux-free 3 ii libc6-i686 2.13-32 Versions of packages linux-image-3.2.0-2-686-pae suggests: pn grub-pc 1.99-21 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-2-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink 0.35 pn firmware-realtek 0.35 pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae: true linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae: false linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk: * linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org