Package: src Version: 3.2.21-3 Followup-For: Bug #680737 I think this is the same problem here.. using an HP dm4t-1200 laptop. The backlight is set to zero brightness as soon as the kernel begins to load. In my case I can set the brightness higher by simply using the appropriate fn key combination, but until then everything looks black.
It looks to me like the following is the fix: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7bd90909bbf9ce7c40e1da3d72b97b93839c188a http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=4dca20efb1a9c2efefc28ad2867e5d6c3f5e1955 found some discussion here https://bbs.archlinux.org/viewtopic.php?id=131747 -- Package-specific info: ** Version: Linux version 3.2.0-3-amd64 (Debian 3.2.21-3) (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 09:07:26 UTC 2012 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-3-amd64 root=/dev/mapper/dml_vg0-rootfs ro quiet ** Tainted: W (512) * Taint on warning. ** Kernel log: [126929.403902] Disabling non-boot CPUs ... [126929.507481] CPU 1 is now offline [126929.611451] CPU 2 is now offline [126929.715414] CPU 3 is now offline [126929.716044] Extended CMOS year: 2000 [126929.716255] ACPI: Low-level resume complete [126929.716317] PM: Restoring platform NVS memory [126929.716907] Extended CMOS year: 2000 [126929.716953] Enabling non-boot CPUs ... [126929.717127] Booting Node 0 Processor 1 APIC 0x1 [126929.717128] smpboot cpu 1: start_ip = 98000 [126929.728155] Calibrating delay loop (skipped) already calibrated this CPU [126929.748519] NMI watchdog enabled, takes one hw-pmu counter. [126929.748862] CPU1 is up [126929.749006] Booting Node 0 Processor 2 APIC 0x4 [126929.749007] smpboot cpu 2: start_ip = 98000 [126929.760034] Calibrating delay loop (skipped) already calibrated this CPU [126929.780482] NMI watchdog enabled, takes one hw-pmu counter. [126929.780840] CPU2 is up [126929.781030] Booting Node 0 Processor 3 APIC 0x5 [126929.781031] smpboot cpu 3: start_ip = 98000 [126929.792056] Calibrating delay loop (skipped) already calibrated this CPU [126929.812621] NMI watchdog enabled, takes one hw-pmu counter. [126929.813138] CPU3 is up [126929.815702] ACPI: Waking up from system sleep state S3 [126930.140757] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [126930.140819] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [126930.140853] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [126930.140857] ehci_hcd 0000:00:1a.0: PME# disabled [126930.140881] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [126930.140983] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [126930.141008] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [126930.141013] ehci_hcd 0000:00:1d.0: PME# disabled [126930.141025] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0) [126930.141099] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [126930.141213] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [126930.141301] brcmsmac 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [126930.141320] brcmsmac 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xb2400004) [126930.141326] brcmsmac 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [126930.141332] brcmsmac 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [126930.141454] PM: early resume of devices complete after 0.746 msecs [126930.141561] i915 0000:00:02.0: setting latency timer to 64 [126930.141567] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [126930.141574] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [126930.141606] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [126930.141611] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [126930.141617] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [126930.141624] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [126930.141644] pci 0000:00:1e.0: setting latency timer to 64 [126930.141657] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [126930.141659] ahci 0000:00:1f.2: setting latency timer to 64 [126930.141710] pci 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [126930.141757] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [126930.141763] brcmsmac 0000:02:00.0: setting latency timer to 64 [126930.141833] sd 0:0:0:0: [sda] Starting disk [126930.180638] r8169 0000:01:00.0: wake-up capability disabled by ACPI [126930.180644] r8169 0000:01:00.0: PME# disabled [126930.286766] Extended CMOS year: 2000 [126930.391986] usb 2-1.6: reset high-speed USB device number 3 using ehci_hcd [126930.467858] ata5: SATA link down (SStatus 0 SControl 300) [126930.475825] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [126930.502542] restoring control 00000000-0000-0000-0000-000000000001/2/3 [126930.510308] ata2.00: configured for UDMA/100 [126930.555930] usb 1-1.4: reset full-speed USB device number 3 using ehci_hcd [126933.202283] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [126933.549442] ata1.00: configured for UDMA/133 [126934.203074] PM: resume of devices complete after 4063.857 msecs [126934.203173] PM: Finishing wakeup. [126934.203174] Restarting tasks ... done. [126934.207103] video LNXVIDEO:00: Restoring backlight state [126934.509229] r8169 0000:01:00.0: eth0: link down [126934.510365] ADDRCONF(NETDEV_UP): eth0: link is not ready [126934.560511] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement) [126934.560516] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement) [126934.562693] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement) [126934.563519] ADDRCONF(NETDEV_UP): wlan0: link is not ready [126935.918564] wlan0: authenticate with 68:7f:74:04:28:06 (try 1) [126935.920270] wlan0: authenticated [126935.920555] wlan0: associate with 68:7f:74:04:28:06 (try 1) [126935.924723] wlan0: RX AssocResp from 68:7f:74:04:28:06 (capab=0x411 status=0 aid=1) [126935.924729] wlan0: associated [126935.927285] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [126935.927297] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [126935.927303] ieee80211 phy0: changing basic rates failed: -22 [126935.927309] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [126935.928710] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [126936.008388] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [126936.101028] ieee80211 phy0: AMPDU status: BA Timeout, seq 6, in_transit 0 [126936.603633] ieee80211 phy0: AMPDU status: BA Timeout, seq 9, in_transit 0 [126946.098928] wlan0: no IPv6 routers present [126973.265850] ieee80211 phy0: AMPDU status: BA Timeout, seq 659, in_transit 0 [126980.735199] ieee80211 phy0: AMPDU status: BA Timeout, seq 708, in_transit 0 [126980.866473] ieee80211 phy0: AMPDU status: BA Timeout, seq 723, in_transit 0 [127114.578694] ieee80211 phy0: AMPDU status: BA Timeout, seq 1617, in_transit 0 [127153.591933] ieee80211 phy0: AMPDU status: BA Timeout, seq 1779, in_transit 0 [127228.513095] ieee80211 phy0: AMPDU status: BA Timeout, seq 2067, in_transit 0 [127283.799589] ieee80211 phy0: AMPDU status: BA Timeout, seq 2358, in_transit 0 [132156.945882] ieee80211 phy0: AMPDU status: BA Timeout, seq 1058, in_transit 0 [134674.156384] ieee80211 phy0: AMPDU status: BA Timeout, seq 4026, in_transit 0 [137329.168027] ieee80211 phy0: AMPDU status: BA Timeout, seq 1596, in_transit 0 ** Model information sys_vendor: Hewlett-Packard product_name: HP Pavilion dm4 Notebook PC product_version: 058A120000242B10000020100 chassis_vendor: Hewlett-Packard chassis_version: Chassis Version bios_vendor: Hewlett-Packard bios_version: F.26 board_vendor: Hewlett-Packard board_name: 146A board_version: 58.28 ** Loaded modules: tun rt2800usb rt2x00usb rt2800lib rt2x00lib crc_ccitt usb_storage uas msr nls_utf8 nls_cp437 vfat fat fuse cryptd aes_x86_64 aes_generic cpufreq_powersave cpufreq_userspace cpufreq_stats cpufreq_conservative parport_pc ppdev lp parport bnep rfcomm bluetooth binfmt_misc uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext2 loop snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec hp_accel lis3lv02d snd_hwdep snd_pcm snd_page_alloc joydev uvcvideo videodev snd_seq snd_seq_device arc4 snd_timer brcmsmac i915 drm_kms_helper acpi_cpufreq drm cordic iTCO_wdt crc8 brcmutil mac80211 hp_wmi sparse_keymap i2c_algo_bit v4l2_compat_ioctl32 media iTCO_vendor_support cfg80211 snd rfkill psmouse i2c_i801 coretemp serio_raw pcspkr i2c_core intel_ips evdev mperf input_polldev battery crc32c_intel video processor soundcore ac power_supply wmi button ext4 crc16 jbd2 mbcache dm_mod sd_mod sr_mod cdrom crc_t10dif ahci libahci fan thermal thermal_sys r8169 libata mii ehci_hcd scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3050 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at b4406100 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b4405c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at b4400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: b3400000-b43fffff Prefetchable memory behind bridge: 00000000b0400000-00000000b13fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: b2400000-b33fffff Prefetchable memory behind bridge: 00000000b1400000-00000000b23fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at b4405800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 41 Region 0: I/O ports at 3048 [size=8] Region 1: I/O ports at 305c [size=4] Region 2: I/O ports at 3040 [size=8] Region 3: I/O ports at 3058 [size=4] Region 4: I/O ports at 3020 [size=32] Region 5: Memory at b4405000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 19 Region 0: Memory at b4406000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 3000 [size=32] 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at b4404000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel ips 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: I/O ports at 2000 [size=256] Region 2: Memory at b0404000 (64-bit, prefetchable) [size=4K] Region 4: Memory at b0400000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:145c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at b2400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:146a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 138a:0005 Validity Sensors, Inc. VFS301 Fingerprint Reader Bus 002 Device 003: ID 10f1:1a28 Importek -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-3-amd64 depends on: ii debconf [debconf-2.0] 1.5.44 ii initramfs-tools [linux-initramfs-tool] 0.106 ii kmod 8-2 ii linux-base 3.5 ii module-init-tools 8-2 Versions of packages linux-image-3.2.0-3-amd64 recommends: ii firmware-linux-free 3.1 Versions of packages linux-image-3.2.0-3-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-22.1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-3-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 0.36 pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-ralink 0.36 ii firmware-realtek 0.36 pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64: linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
