On Mon, Sep 03, 2012 at 06:27:12PM +0200, Josip Rodin wrote: > On Sun, Sep 02, 2012 at 02:42:38PM +0100, Ben Hutchings wrote: > > On Sat, 2012-09-01 at 10:45 +0200, Bastian Blank wrote: > > > On Fri, Aug 31, 2012 at 05:52:03PM +0200, Josip Rodin wrote: > > > > auto vlan2 > > > > iface vlan2 inet manual > > > > vlan-raw-device xenbr0 > > > > > > Is vlan-over-bridge documented to be supported? > > > > If it was not supported then bridge devices would have > > NETIF_F_VLAN_CHALLENGED and you would not be able to create VLAN devices > > on top of them. But I don't expect this to work *well* at present. > > > > Rebooting, however... something is very wrong here. > > > > > Usually I would use: > > > | iface xenbr2 inet static > > > | bridge-ports bond0.2 > > > > > > > But as soon as I generate any traffic to or from 192.168.54.0/24 and > > > > that > > > > virtual machine (notice - not the right VLAN), the whole system > > > > instantly > > > > reboots, with no messages in syslog. > > > > > > Does it work without bond? > > Ah, good catch, I do actually seem to want to use the underlying device for > vlan, rather than the bridge device. All my other setups are like that.
Confirming it works with fixed vlan-raw-device, pointed to eth2. I should test with bond now, that was probably it... -- 2. That which causes joy or happiness. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org