Package: src:linux
Version: 3.2.32-1
Severity: normal
Dear Maintainer,
The load of a realtime proces that I run is increased by more than 50%. With
kernel 3.2.0-2 it was about 13% and since kernel 3.2.0-3 (and 3.2.0-4) it is
around 19%.
The only difference is the kernel that I boot so therefore I think it is
related to the kernel.
Mark
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3
(Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=ee93b7c8-7d8e-4b18-82b3-14336f5f08d4 ro quiet
** Not tainted
** Kernel log:
[ 2.066055] Refined TSC clocksource calibration: 2400.003 MHz.
[ 2.066062] Switching to clocksource tsc
[ 2.166330] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.166335] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.166780] hub 2-1:1.0: USB hub found
[ 2.166934] hub 2-1:1.0: 8 ports detected
[ 2.437643] usb 2-1.3: new low-speed USB device number 3 using ehci_hcd
[ 2.535900] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c050
[ 2.535906] usb 2-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.535911] usb 2-1.3: Product: USB-PS/2 Optical Mouse
[ 2.535914] usb 2-1.3: Manufacturer: Logitech
[ 2.605405] usb 2-1.4: new low-speed USB device number 4 using ehci_hcd
[ 2.673098] ata2.00: failed to resume link (SControl 0)
[ 2.703265] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c31d
[ 2.703271] usb 2-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.703276] usb 2-1.4: Product: USB Keyboard
[ 2.703279] usb 2-1.4: Manufacturer: Logitech
[ 2.712891] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input0
[ 2.713007] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2.715809] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input1
[ 2.715899] generic-usb 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10
Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.4/input0
[ 2.722289] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input2
[ 2.722382] generic-usb 0003:046D:C31D.0003: input,hidraw2: USB HID v1.10
Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.4/input1
[ 2.722405] usbcore: registered new interface driver usbhid
[ 2.722407] usbhid: USB HID core driver
[ 3.004617] ata1.01: failed to resume link (SControl 0)
[ 3.160480] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.160500] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 3.169581] ata1.00: ATA-8: WDC WD1600BEVT-00A0RT0, 01.01A01, max UDMA/133
[ 3.169587] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.185563] ata1.00: configured for UDMA/133
[ 3.185899] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-0 01.0
PQ: 0 ANSI: 5
[ 3.699500] ata2.01: failed to resume link (SControl 0)
[ 3.711025] ata2.00: SATA link down (SStatus 0 SControl 0)
[ 3.711047] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 3.715826] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149
GiB)
[ 3.715924] sd 0:0:0:0: [sda] Write Protect is off
[ 3.715928] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.715981] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.770580] sda: sda1 sda2 sda3 sda4
[ 3.771203] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.772919] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.475725] udevd[344]: starting version 175
[ 8.048896] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.048904] ACPI: Power Button [PWRB]
[ 8.048960] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.048963] ACPI: Power Button [PWRF]
[ 8.136625] parport_pc 00:05: reported by Plug and Play ACPI
[ 8.136693] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 8.183858] ACPI: Requesting acpi_cpufreq
[ 8.284580] iTCO_vendor_support: vendor-support=0
[ 8.284813] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.337322] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 8.337431] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
[ 8.337623] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.404048] ACPI: resource 0000:00:1f.3 [io 0xf000-0xf01f] conflicts with
ACPI region SMBI [io 0xf000-0xf00f]
[ 8.404051] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 8.549094] [drm] Initialized drm 1.1.0 20060810
[ 8.698582] i915 0000:00:02.0: setting latency timer to 64
[ 8.737762] mtrr: type mismatch for d0000000,10000000 old: write-back new:
write-combining
[ 8.737765] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 8.738066] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 8.738071] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.738073] [drm] Driver supports precise vblank timestamp query.
[ 8.738112] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.749963] fixme: max PWM is zero.
[ 9.007491] fbcon: inteldrmfb (fb0) is primary device
[ 9.009145] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync,
-vsync)
[ 9.365729] Console: switching to colour frame buffer device 128x48
[ 9.371098] fb0: inteldrmfb frame buffer device
[ 9.371101] drm: registered panic notifier
[ 9.379160] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 9.388792] acpi device:52: registered as cooling_device4
[ 9.389144] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 9.389209] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.389265] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.573129] Error: Driver 'pcspkr' is already registered, aborting...
[ 9.641628] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 9.641672] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 9.718930] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 12.024536] loop: module loaded
[ 13.768881] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.496492] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 16.497341] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.951952] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.492222] RPC: Registered named UNIX socket transport module.
[ 21.492229] RPC: Registered udp transport module.
[ 21.492233] RPC: Registered tcp transport module.
[ 21.492237] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 21.558269] FS-Cache: Loaded
[ 21.588635] FS-Cache: Netfs 'nfs' registered for caching
[ 21.606368] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 21.957731] fuse init (API version 7.17)
[ 22.638928] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
None
[ 22.638935] e1000e 0000:03:00.0: eth1: 10/100 speed: disabling TSO
[ 22.639657] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 26.398575] lp0: using parport0 (interrupt-driven).
[ 26.415935] ppdev: user-space parallel port driver
[ 26.708912] eth0: no IPv6 routers present
[ 33.629530] eth1: no IPv6 routers present
** Model information
sys_vendor: To be filled by O.E.M.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 4.6.3
board_vendor: To be filled by O.E.M.
board_name: To be filled by O.E.M.
board_version: To be filled by O.E.M.
** Loaded modules:
ppdev
lp
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
joydev
snd_pcm
snd_page_alloc
coretemp
snd_timer
crc32c_intel
ghash_clmulni_intel
snd
aesni_intel
soundcore
aes_x86_64
aes_generic
cryptd
acpi_cpufreq
psmouse
mperf
i915
drm_kms_helper
drm
i2c_algo_bit
i2c_i801
evdev
i2c_core
serio_raw
iTCO_wdt
pcspkr
iTCO_vendor_support
processor
video
parport_pc
parport
button
thermal_sys
ext2
mbcache
sg
sd_mod
crc_t10dif
usbhid
hid
ata_generic
ata_piix
libata
ehci_hcd
scsi_mod
usbcore
e1000e
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller
[8086:0044] (rev 12)
Subsystem: Intel Corporation Core Processor DRAM Controller [8086:0044]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor
Integrated Graphics Controller [8086:0046] (rev 12) (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation Core Processor Integrated Graphics
Controller [8086:0046]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f0e0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series
Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Intel Corporation 5 Series/3400 Series Chipset HECI
Controller [8086:3b64]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fbc08000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced
Host Controller [8086:3b3c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbc07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset
High Definition Audio [8086:3b56] (rev 06)
Subsystem: Intel Corporation 5 Series/3400 Series Chipset High
Definition Audio [8086:3b56]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at fbc00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 2 [8086:3b44] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fba00000-fbbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 6 [8086:3b4c] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fb800000-fb9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced
Host Controller [8086:3b34]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbc06000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC
Interface Controller [8086:3b07] (rev 06)
Subsystem: Intel Corporation Mobile 5 Series Chipset LPC Interface
Controller [8086:3b07]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4
port SATA IDE Controller [8086:3b2e] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA
IDE Controller [8086:3b2e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f090 [size=16]
Region 5: I/O ports at f080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller [8086:3b30] (rev 06)
Subsystem: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller [8086:3b30]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbc05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2
port SATA IDE Controller [8086:3b2d] (rev 06) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA
IDE Controller [8086:3b2d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f030 [size=16]
Region 5: I/O ports at f020 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network
Connection [8086:10d3]
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbb00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fba00000 (32-bit, non-prefetchable) [size=1M]
Region 2: I/O ports at e000 [size=32]
Region 3: Memory at fbb20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network
Connection [8086:10d3]
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fb900000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fb800000 (32-bit, non-prefetchable) [size=1M]
Region 2: I/O ports at d000 [size=32]
Region 3: Memory at fb920000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0
[8086:2d10] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0
[8086:2d11] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved
[8086:2d12] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved
[8086:2d13] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
Bus 002 Device 004: ID 046d:c31d Logitech, Inc.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-23
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
