Package: src:linux Version: 3.2.23-1 Severity: normal I don't know when this was introduced but pmu_battery is no longer available as kernel module in powerpc kernels. The module is needed to display the battery status in PowerPC based laptops like iBooks and PowerBooks. It would be great if this could be reintroduced as it helps a lot of folks to keep track of their batteries.
Regards, Jeroen Diederen http://mintppc.org -- Package-specific info: ** Version: Linux version 3.2.0-3-powerpc64 (Debian 3.2.23-1) (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 08:03:56 UTC 2012 ** Command line: root=UUID=e67dc7c8-7311-4829-b767-23b0177891bb ro ** Not tainted ** Kernel log: [ 10.750942] i2c i2c-5: wf_lm75: attach_adapter method is deprecated [ 10.750958] i2c i2c-5: Please use another way to instantiate your i2c_client [ 10.771514] [drm] nouveau 0000:f0:10.0: 0 available performance level(s) [ 10.771565] [drm] nouveau 0000:f0:10.0: c: core 241MHz memory 475MHz [ 10.772567] [TTM] Zone kernel: Available graphics memory: 503228 kiB. [ 10.772589] [TTM] Initializing pool allocator. [ 10.772646] [drm] nouveau 0000:f0:10.0: Detected 64MiB VRAM [ 10.776595] [drm] nouveau 0000:f0:10.0: 64 MiB GART (aperture) [ 10.779323] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 10.779342] [drm] No driver support for vblank timestamp query. [ 10.779394] [drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on tmds encoder (output 0) [ 10.779410] [drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on vga encoder (output 1) [ 10.779425] [drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on TV encoder (output 2) [ 10.908190] i2c i2c-6: wf_lm75: attach_adapter method is deprecated [ 10.908210] i2c i2c-6: Please use another way to instantiate your i2c_client [ 10.962150] [drm] nouveau 0000:f0:10.0: allocated 1680x1050 fb: 0x49000, bo c000000039000c00 [ 11.087857] [drm] nouveau 0000:f0:10.0: Pixel clock comparison table not found [ 11.087866] [drm] nouveau 0000:f0:10.0: Setting dpms mode 0 on tmds encoder (output 0) [ 11.087875] [drm] nouveau 0000:f0:10.0: Output DVI-D-1 is running on CRTC 0 using output A [ 11.173395] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.175210] Registered led device: b43-phy0::tx [ 11.175260] Registered led device: b43-phy0::rx [ 11.175307] Registered led device: b43-phy0::radio [ 11.175345] Broadcom 43xx driver loaded [ Features: PMNLS ] [ 11.195067] [drm] nouveau 0000:f0:10.0: Setting dpms mode 0 on vga encoder (output 1) [ 11.195077] [drm] nouveau 0000:f0:10.0: Output VGA-1 is running on CRTC 1 using output B [ 11.195459] Console: switching to colour frame buffer device 210x65 [ 11.213678] fb0: nouveaufb frame buffer device [ 11.213748] drm: registered panic notifier [ 11.270250] [drm] Initialized nouveau 1.0.0 20120316 for 0000:f0:10.0 on minor 0 [ 11.404231] usb 2-3: USB disconnect, device number 2 [ 11.407756] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62 [ 11.550866] cfg80211: World regulatory domain updated: [ 11.550970] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.551100] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.551223] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.551345] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.551467] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.551590] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.078194] usb 2-3: new full-speed USB device number 3 using ohci_hcd [ 12.342985] usb 2-3: New USB device found, idVendor=05ac, idProduct=8204 [ 12.343114] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.487955] Bluetooth: Core ver 2.16 [ 12.488106] NET: Registered protocol family 31 [ 12.488178] Bluetooth: HCI device and connection manager initialized [ 12.488293] Bluetooth: HCI socket layer initialized [ 12.488371] Bluetooth: L2CAP socket layer initialized [ 12.490496] Bluetooth: SCO socket layer initialized [ 12.519836] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 12.525806] usbcore: registered new interface driver btusb [ 13.183760] Adding 2947260k swap on /dev/sda5. Priority:-1 extents:1 across:2947260k [ 13.227228] EXT4-fs (sda4): re-mounted. Opts: (null) [ 13.528133] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro [ 13.647481] loop: module loaded [ 13.842985] snd-aoa-fabric-layout: Using PMF GPIOs [ 13.860056] i2c i2c-0: aoa_codec_onyx: attach_adapter method is deprecated [ 13.866758] i2c i2c-0: Please use another way to instantiate your i2c_client [ 13.873304] i2c i2c-1: aoa_codec_onyx: attach_adapter method is deprecated [ 13.879799] i2c i2c-1: Please use another way to instantiate your i2c_client [ 13.886243] i2c i2c-2: aoa_codec_onyx: attach_adapter method is deprecated [ 13.892639] i2c i2c-2: Please use another way to instantiate your i2c_client [ 13.899045] snd-aoa-codec-onyx: found k2-i2c, checking if onyx chip is on it [ 13.903148] snd-aoa-fabric-layout: can use this codec [ 13.938745] snd-aoa-codec-onyx: attached to onyx codec via i2c [ 13.945455] snd-aoa-codec-onyx: created and attached onyx instance [ 13.945478] i2c i2c-3: aoa_codec_onyx: attach_adapter method is deprecated [ 13.951937] i2c i2c-3: Please use another way to instantiate your i2c_client [ 13.958359] i2c i2c-4: aoa_codec_onyx: attach_adapter method is deprecated [ 13.964774] i2c i2c-4: Please use another way to instantiate your i2c_client [ 13.971211] i2c i2c-5: aoa_codec_onyx: attach_adapter method is deprecated [ 13.977640] i2c i2c-5: Please use another way to instantiate your i2c_client [ 13.984069] i2c i2c-6: aoa_codec_onyx: attach_adapter method is deprecated [ 13.990483] i2c i2c-6: Please use another way to instantiate your i2c_client [ 15.257885] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 16.532094] RPC: Registered named UNIX socket transport module. [ 16.538262] RPC: Registered udp transport module. [ 16.544323] RPC: Registered tcp transport module. [ 16.550311] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 16.589850] FS-Cache: Loaded [ 16.681309] FS-Cache: Netfs 'nfs' registered for caching [ 16.716238] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 17.595997] fuse init (API version 7.17) [ 21.974442] sungem_phy: PHY ID: 4061e4, addr: 0 [ 21.974733] gem 0001:03:0f.0: eth0: Found BCM5221 PHY [ 21.982682] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.418114] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) [ 22.481833] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.640601] Bluetooth: RFCOMM TTY layer initialized [ 23.640620] Bluetooth: RFCOMM socket layer initialized [ 23.640625] Bluetooth: RFCOMM ver 1.11 [ 23.672110] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.672120] Bluetooth: BNEP filters: protocol multicast [ 24.841746] lp: driver loaded but no devices found [ 25.666163] wlan0: authenticate with 00:24:b2:d8:3c:0a (try 1) [ 25.667652] wlan0: authenticated [ 25.690171] wlan0: associate with 00:24:b2:d8:3c:0a (try 1) [ 25.692703] wlan0: RX AssocResp from 00:24:b2:d8:3c:0a (capab=0x431 status=0 aid=2) [ 25.692710] wlan0: associated [ 25.693793] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.945840] wlan0: no IPv6 routers present ** Model information revision : 3.0 (pvr 003c 0300) platform : PowerMac model : PowerMac8,1 machine : PowerMac8,1 motherboard : PowerMac8,1 MacRISC4 Power Macintosh ** Loaded modules: cpufreq_ondemand cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace parport_pc lp parport bnep rfcomm fuse nfsd nfs nfs_acl auth_rpcgss lockd fscache sunrpc snd_aoa_codec_onyx snd_aoa_fabric_layout snd_aoa snd_aoa_i2sbus snd_aoa_soundbus snd_pcm snd_seq snd_seq_device snd_timer snd soundcore snd_page_alloc loop btusb bluetooth evdev arc4 nouveau b43 bcma mac80211 ttm drm_kms_helper i2c_powermac cfg80211 rfkill rng_core drm hid_apple ext4 crc16 jbd2 mbcache windfarm_cpufreq_clamp windfarm_lm75_sensor usbhid hid windfarm_smu_sensors windfarm_smu_controls windfarm_pm81 windfarm_pid windfarm_core sd_mod crc_t10dif ohci_hcd ata_generic ssb ehci_hcd sr_mod usbcore firewire_ohci mmc_core firewire_core crc_itu_t cdrom pcmcia pcmcia_core sata_svw sungem sungem_phy usb_common ** PCI devices: 0000:f0:0b.0 Host bridge [0600]: Apple Inc. U3L AGP Bridge [106b:0058] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Capabilities: <access denied> Kernel driver in use: agpgart-uninorth 0000:f0:10.0 VGA compatible controller [0300]: NVIDIA Corporation NV34M [GeForce FX Go5200] [10de:0329] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Powerbook G4 [10de:0010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 59 Region 0: Memory at 91000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at a0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at 90000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nouveau 0001:00:00.0 Host bridge [0600]: Apple Inc. U4 PCIe [106b:0056] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 0001:00:01.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0053] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Memory behind bridge: 80200000-805fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:00:02.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0054] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: 80000000-800fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:00:03.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0055] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 Memory behind bridge: 80100000-801fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:01:01.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Subsystem: Apple Inc. AirPort Extreme [106b:004e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 Interrupt: pin A routed to IRQ 60 Region 0: Memory at 80084000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: b43-pci-bridge 0001:01:07.0 Unassigned class [ff00]: Apple Inc. Shasta Mac I/O [106b:004f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 64 bytes Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K] Kernel driver in use: macio 0001:01:0b.0 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 70 Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 0001:01:0b.1 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 70 Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 0001:01:0b.2 USB controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI]) Subsystem: NEC Corporation USB 2.0 [1033:00e0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 70 Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 0001:02:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Broadcom K2 SATA [1166:0240] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 Interrupt: pin ? routed to IRQ 17 Region 0: I/O ports at <unassigned> [disabled] Region 1: I/O ports at <unassigned> [disabled] Region 2: I/O ports at <unassigned> [disabled] Region 3: I/O ports at <unassigned> [disabled] Region 4: I/O ports at <unassigned> [disabled] Region 5: Memory at 80102000 (32-bit, non-prefetchable) [size=8K] Kernel driver in use: sata_svw 0001:02:0d.0 Unassigned class [ff00]: Apple Inc. Shasta IDE [106b:0050] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin ? routed to IRQ 38 Region 0: Memory at 80104000 (32-bit, non-prefetchable) [size=16K] Kernel driver in use: pata-pci-macio 0001:02:0e.0 FireWire (IEEE 1394) [0c00]: Apple Inc. Shasta Firewire [106b:0052] (prog-if 10 [OHCI]) Subsystem: Apple Inc. Device [106b:5811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 39 Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 0001:03:0f.0 Ethernet controller [0200]: Apple Inc. Shasta (Sun GEM) [106b:0051] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at 80400000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at 80200000 [disabled] [size=1M] Kernel driver in use: gem ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 05ac:8204 Apple, Inc. Bluetooth HCI [Bluetooth 2.0 + EDR, built-in] Bus 003 Device 002: ID 05ac:1003 Apple, Inc. Hub in Pro Keyboard [Mitsumi, A1048] Bus 003 Device 003: ID 05ac:0304 Apple, Inc. Optical USB Mouse [Mitsumi] Bus 003 Device 004: ID 05ac:020c Apple, Inc. Extended Keyboard [Mitsumi] -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: powerpc (ppc64) Kernel: Linux 3.2.0-3-powerpc64 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-3-powerpc64 depends on: ii debconf [debconf-2.0] 1.5.48 iu initramfs-tools [linux-initramfs-tool] 0.109 iu kmod 9-2 ii linux-base 3.5 iu module-init-tools 9-2 Versions of packages linux-image-3.2.0-3-powerpc64 recommends: ii firmware-linux-free 3.1 Versions of packages linux-image-3.2.0-3-powerpc64 suggests: pn debian-kernel-handbook <none> pn linux-doc-3.2 <none> pn mkvmlinuz <none> Versions of packages linux-image-3.2.0-3-powerpc64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
