Hi, On 05/13/2013 03:40 PM, Ben Hutchings wrote: > On Mon, 2013-05-13 at 09:01 +0200, Roland Stigge wrote: >> Source: linux >> Version: 3.8.12-1 >> Severity: wishlist >> Tags: sid >> User: debian-powerpc...@breakpoint.cc >> Usertags: powerpcspe >> >> Hi, >> >> on powerpcspe[1], linux currently FTBFS like this: >> >> ... >> HOSTCC arch/powerpc/boot/mktree >> WRAP arch/powerpc/boot/uImage >> INFO: Uncompressed kernel (size 0x5d1000) overlaps the address of the >> wrapper(0x400000) >> INFO: Fixing the link_address of wrapper to (0x600000) >> "mkimage" command not found - U-Boot images will not be built >> make[6]: *** [arch/powerpc/boot/uImage] Error 1 >> ... >> >> This is because the platforms CONFIG_MPC85xx activated in our powerpcspe >> config >> select CONFIG_DEFAULT_UIMAGE which leads to mkimage (for uImage creation) to >> be >> called. >> >> Adding Build-Depends: u-boot-tools fixes this. Limiting to [powerpcspe] would >> be fine for now, IMO. > > On many ARM platforms, u-boot images are generated by flash-kernel at > installation time. Shouldn't this platform be handled in the same way?
Thank you for the quick response! You are right - the uImage generated in the above step is not directly used on boot (without flashing separately on typical PowerPCSPE boards). I'm working on a solution for this, separately. However, the powerpc specific option CONFIG_DEFAULT_UIMAGE always tries to build uImage at (Debian package) linux build time, see arch/powerpc/boot/Makefile:207: image-$(CONFIG_DEFAULT_UIMAGE) += uImage So can we add u-boot-tools as build-dep for powerpcspe? Or do you have a different suggestion for making the default package "linux" build? Thanks in advance, Roland -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org